rebel97

I can upgrade your HD. If your still looking PM me.

Check your Nav Voice volume level. It could be set to zero which means you have no voice. Just turn it up and this should solve your issue.

Just a side note to the issues you are having. Unless you have done the bypass on your Z, you have to have your E-Brake engaged for many of your GPS buttons to work, this includes the "Go To" button. Hope this helps you in you quest.

Don't know if this is reletive to your situation, But...... I had to buy an antenna adapter for my now Z3. I have a 08 Dodge Quad Cab, the antenna wire would fit into the connection, but not the correct way. After getting the adapter, FM has worked great......Might be something to check out.

Where is your Sat. Ant. located. Mine is located on center top of the dash next to the windshield. If yours is under the dash, just relocate to on top. As for you other issue, you don't have to use the VSS wire. I have a '08 Dodge quad cab 4x4, VSS not connected, and my Z2 now converted to a Z3 is dead on all the time(speed and location). Hope this helps.

Just a couple things. Was your Z2 new or a refurb? If it was new you might want to return it for a new one. Also you might want to check out your ground wire and make sure it is grounded correctly. If all else fails, try a hard reset on your Z2, this may correct the issue you are having.

Hey frystech22, Wrong forum.......................

You can do what I did. Go to Crutchfield.com or call them direct. Tell the what you have and what you drive. They can fix you up with an install kit for your Z2 and the correct wiring harness for your car. They also supply complete printed instructions for your install. Also if a problem comes up tyou can call anytime for tech support for your install. All tech support is free by the way. I have been using Crutchfield for about 20 years now with no complaints. Their prices for instalation kits and harnesses are very good and tech support for free, you just can't beat it.

You need Harness #2......Not the power harness.

Responding to an earlier post: Since you wont be useing the image in the unit itself, the HD doesn't have to be the same. I can cloan the Z3 image to almost any HD of at least 40gig or more (IDE,SATA, or a laptop HD). Then you would be able to get it to someone who can get it posted for everyone to have. I do have the image and willing to share it. All I need is a way to get it where its needed.

Hey guys I have an image of the Z3 I will be glad to donate. Here's the thing.......It is on a Toshiba 40gig 5400rpm HD. I have no way to upload this image. It is unlocked. I do have a HD duplicating machine. I can cloan up 5 at one time. If someone would supply a HD I would be glad to cloan it so it can be posted to the correct location. I can't upload the directly from the HD because I have no of connecting it to my PC. But will help get to someone who can get it up.

To get voice command to work, you need to touch the Icon to get it going, then speak into the external mic. Oh and also learn all those comands.

L O U D......E R than that

What you need is a Toshiba 40gig 5400rpm hard drive for a laptop. As for location you can do a google search and get it from several fine internet web sites, or you can go to your local computer shop, or someplace like Bestbuy. The only fee you would pay would be shipping to and from me. You will need a #8 Torx head bit to remove the hard drive cover on the Z unit you have. You will aslo need a #1 Phillips head screw driver to remove the hard drive from the cradle. These 4 screws also strip out very easy, so be careful when you remove them. If you have any other questions just let me know.

yes they do work together.

GOOD ONE.........NOW THAT WAS FUNNY......LMAO...

Here is just my 2 cents worth.......I bought a refurb z2 off Ebay, had it for a couple months with no problems at all......my routing was spot on everytime. Just did the Z2 to Z3 upgrad a week or so ago...and still don't have any issues for the way I use the unit.....except for the Artist..Album glitch. I did BTW take the time to read the manual and learn the voice commands and my bluetooth works perfect with my Blackjack. Or maybe I'm just one of the lucky few......But at this time I am happy with my now Z3 and would not pursue a lawsuit against Pioneer.....Again this is just my 2 Cents.

To answer some of the questions ask so far. If you do a search by artist it will bring up all songs under that artist. You can do a search by album and it will only bring up the songs on that album. Search by song, will bring up every song by that name reguardless of the artist. No, did not come from Ebay. Hard drive prices range from around $50 to $75 depending on where you buy it. Sorry can't FTP, image isn't on my PC. I do have a hard drive cloaning device and can duplicate up to 5 at one time. If someone wanted to forward me a Toshiba 40gig 5400rpm hard drive so that everyone can have acce

I just got my hands on a Z3 image on a Toshiba 40gig hard drive & did the upgrade. Most everything looks the same. Voice reconition seems to work much better than the Z2 version did. Haven't had a lot of time to play with the maps yet, but turn by turn guidence also seems to be alot smoother than the Z2 was. This is just my first impression. I also have a hard drive duplicator and can make an image for anyone willing to supply a 40 gig hard drive and pay your shipping. Not wanting to make any money on this, just want to help fellow Z oners out. If I can anyone with any info on this I w

I bought a refurb Z2 for $739.00 from 99cartoons on ebay. They shipped very quickly, and was packaged and sealed directly from Pioneer. I installed it in my '08 Dodge Quad Cab and it works just like new. I couldn't be happier with my purchase. Always check feedback before buying anything on Ebay.

Hey Man, I have tried and tried to make this cd. I think I have ruined 10 to 15 so far. Could you please send me a working copy. I will gladly pay you what you think is fair. Address is: James Fuson, 127 Sumter Drive, Malvern Arkansas 72104. Thanks is advance for your help

Hey Everyone, I just bought a used Sirius SIR-PNR1 off EBay to go with my AVIC-Z2. I receved it in good order, but. Everthing was included but the manual. Can someone please let me know for sure that the yellow wire is posative(+) and the black wire is negative(-). I think they are but would like to know for sure. Thanks in advance for all your help.

Hello everyone, Can someone please let me know the best burning software to use to burn the Z2 Firmware update to disk. Thanks in advance for any help.

Hello Everyone, I just installed a Z2 in my '08 Dodge Quad cab. I have done my research and just can't find which wire to connect the (pink) VSS wire to. Does anyone know the color code or the location of that wire in my truck. Thanks in advance for any help, hints, or tips you may have.

Hey, I got mine today from AutoToys.com. Havn't installed it yet, but look and quality is very good (Metra Part). When first listed selling price was $99.95, this is the price I got mine at. Just after a few days selling price was raised to $128.95.......go figure. This is for the Infinity Sound System. Once installed will let you know.