heyredy141

You can do this by going to MAP settings -> View Mode -> Rear View (Page 30 in the below manual) http://www.pioneerelectronics.com/StaticFiles/Manuals/Car/AVIC-Z130BT_OperationManual071211.pdf

This might be good. http://www.abt.com/product/57794/Pioneer-NDBC5.html This is latest pioneer universal camera and it uses CMOS sensor instead of CCD.

They did include hard copies of the installation instructions for me. I am not sure why John didn't get it.

I wasn't even sure that Iphone 3GS was supported. I tried Iphone 3G and it isn't supported but youtube videos look fine with my Iphone 4. Check the quality of the youtube videos you are streaming. I use Hyper PIOCDIU51V cable for this.

It would be awesome if this port happens.

I went to a new installer and all my issues are fixed now and he did the bypass as well.

Yes, it should under some settings. You would have to change the mute option to 'Navi/Phone/VR' or something like that. This setting allows you to mute radio when navi is giving directions.

I also do not get any RDS information on Analog stations. I do not know if it is station dependent.

I know you can cancel the echo off options for BT on z130bt but i am not sure you can assign BT audio to front without changing other settings

Thanks for the responses. I will get my installer to fix this issue.

Traffic Tuner per my understanding uses FM to broadcast data to the unit. So, as long as the connections are made correctly it should be able to receive traffic data and per my understanding most of the RDC stations are non HD. Use this to see which stations are transmitting traffic data in your area. http://totaltraffic.com/CoverageAreas/

No, I do not have any HID's installed on my car. I only got DRL installed on my car when I took it from US to Canada but other than that nothing.

Hello All, I recently got my Z130BT installed in my car and from then on I am noticing a buzzing sound whenever I turn on headlights. It goes away when I turn off the headlights. Does anyone have similar issues and can anyone suggest what could be the issue here? Thanks

Sorry, that is not what I meant. Unit powers on when the car starts and powers off when the car is turned off. There is an option to switch off the display without turning off the unit by holding the home button for about 5 seconds. This works only when the parking brake is on and not when the vehicle is in motion.

I also used the mic that came with my Sony HTIB and it did wonders to the sound quality. It sounds pretty awesome after the auto EQ was done. I do not believe it matters if you used Sony vs Pioneer mic as long as you use calibration mic.