heyredy141

You can do this by going to MAP settings -> View Mode -> Rear View (Page 30 in the below manual) http://www.pioneerelectronics.com/StaticFiles/Manuals/Car/AVIC-Z130BT_OperationManual071211.pdf

This might be good. http://www.abt.com/product/57794/Pioneer-NDBC5.html This is latest pioneer universal camera and it uses CMOS sensor instead of CCD.

They did include hard copies of the installation instructions for me. I am not sure why John didn't get it.

I wasn't even sure that Iphone 3GS was supported. I tried Iphone 3G and it isn't supported but youtube videos look fine with my Iphone 4. Check the quality of the youtube videos you are streaming. I use Hyper PIOCDIU51V cable for this.

It would be awesome if this port happens.

I went to a new installer and all my issues are fixed now and he did the bypass as well.

Yes, it should under some settings. You would have to change the mute option to 'Navi/Phone/VR' or something like that. This setting allows you to mute radio when navi is giving directions.

I also do not get any RDS information on Analog stations. I do not know if it is station dependent.

I know you can cancel the echo off options for BT on z130bt but i am not sure you can assign BT audio to front without changing other settings

Thanks for the responses. I will get my installer to fix this issue.

Traffic Tuner per my understanding uses FM to broadcast data to the unit. So, as long as the connections are made correctly it should be able to receive traffic data and per my understanding most of the RDC stations are non HD. Use this to see which stations are transmitting traffic data in your area. http://totaltraffic.com/CoverageAreas/

No, I do not have any HID's installed on my car. I only got DRL installed on my car when I took it from US to Canada but other than that nothing.

Hello All, I recently got my Z130BT installed in my car and from then on I am noticing a buzzing sound whenever I turn on headlights. It goes away when I turn off the headlights. Does anyone have similar issues and can anyone suggest what could be the issue here? Thanks

Sorry, that is not what I meant. Unit powers on when the car starts and powers off when the car is turned off. There is an option to switch off the display without turning off the unit by holding the home button for about 5 seconds. This works only when the parking brake is on and not when the vehicle is in motion.

I also used the mic that came with my Sony HTIB and it did wonders to the sound quality. It sounds pretty awesome after the auto EQ was done. I do not believe it matters if you used Sony vs Pioneer mic as long as you use calibration mic.

Yeah, they do not have installation manual for z130 bt on their website but they do send it with the unit. So, use that.

I got this info from the Pioneer Support center when I talked to them over phone. So, this is not documented anywhere else. Like I said, CAN refers to the version number of the tuner. If that is not detected, it means that the traffic tuner is not hooked up correctly or the traffic tuner is defective.

For benefit of others, if you face the same issue as mine then please verify the below. • Press the “HOME” key • Select the “Settings” tab • Select “System Settings” • Select “Service Information” • Press and hold the upper left corner of the “Service Information” screen for a few seconds • The "Platform Version" number and the "Application Version" number will be displayed --please look at the "CAN " number, which is displayed at the bottom of the screen If this is dashes, then it means one of 2 things. 1) Installation was not done correctly 2) the tuner is defective.

Just for the benefit of others, I confirmed that this is working as expected. Pioneer disabled screen off feature when not parked by design though it is stupid on why they did it.

Are you doubly sure that you are able to turn off the display if you do not have your parking brake on? The reason why I am asking it is odd on how everything else is working but this and illumination and traffic tuner. Anyways, I am going back to him and I got the below for him to make sure he does it right this time. Pioneer Harness Scosche HA08B / HA08 Other Yellow Yellow 12V Constant Red Red 12V Accessory Orange Orange Dash Light Dimmer/Illumination

Thanks for the response. As shown in the below link it is available in Vancouver, Canada but does not seem to be working. It keeps saying no providers available. Any ideas on what might be the cause? http://totaltraffic....65-b4441ed564ef

That is exactly what I am saying. Hmm.. Is there some sort of wiring diagram from Pioneer harness to Scosche HA08B / HA08. I got this installed by an installer and it would be helpful to have him refer to this if available.

I installed it and I do not receive any data yet. I am troubleshooting if it is an installation or signal issue in my area. I had it installed at an installer but I believe it has not been installed correctly as anytime I click on traffic providers it gives no providers available

help please?

I am not sure about that. Do you know if this is really the case? Can you direct me to the info as Pioneer did not mention anything about it when I called them but they did not seem to know anything about their product anyways.