xsdbs

Hello, I picked up an S1 portable nav but the map is out of date. Is there a way to get a map update without having to purchase the update from Pioneer? Thanks for any help on this issue.

if it keeps blowing fuses there is an internal issue, probably a diode blown. question is what wire did your friend tie into on the cig lighter? sounds like he may have tied the ground to a power line, if he had tied power to power even at the cig lighter this would not have blown a fuse or smoked the unit. where did you get the unit from? if your friend did indeed tie power to power and ground to ground then you may be able to take the unit back for an exchange.

#1. I am a loser who CAN read fine print. #2. I may be adopted, but at least my adoptive parents arent trailer trash fuckers who raised an idiot kid. Dont mind the idiot newb, xsdbs. He is just mad that he was too fucking illiterate to read the fine print and now he feels he got screwed. ---------------------------------------------------------------------------------- yeah some people want a kiss to go with the screw. guess all he got was a pat on the back of the head and a GOOD BOY.

[quote="sergius"]#1 ure a loser #2 ur adopted WOW!!!! wtf is with this guy, dude you ought to put the stick down and try talking sensibly. seems you didn't do your homework before buying, but hey you GOT 0% financing, you DA MAN

[quote="xsdbs"]wow, there are some old guys here, ya mind if I through a couple out @ ya: 1970's vehicles such as opal gt, chevy luv trucks, datsun B210, 80's nissan picks or, maybe an easy 1- the good ole 10 minute ant, unit & 2 door spkrs finished in 15 minutes. How many remember having to fabricate your own dash kits from abs panels? what about before you could get factory harness adaptors and you had to figure out the wiring? BOY those were the days. kids got it easy anymore. I know there are still a few difficult cars today but they all have intergration parts that really allo

wow, there are some old guys here, ya mind if I through a couple out @ ya: 1970's vehicles such as opal gt, chevy luv trucks, datsun B210, 80's nissan picks or, maybe an easy 1- the good ole 10 minute ant, unit & 2 door spkrs finished in 15 minutes. How many remember having to fabricate your own dash kits from abs panels? what about before you could get factory harness adaptors and you had to figure out the wiring? BOY those were the days. kids got it easy anymore. I know there are still a few difficult cars today but they all have intergration parts that really allows any one to d

Thanks, I appreciate it. I was being a little lazy and thought I would ask instead of fiqure it out.

anyone know off hand where the vss wire is for a 1994 ford bronco full size? thanks for any help

ummm, yeah. that would be really cool. wow I really never thought about that. WOW

yeah, what you said

As I mentioned I am not a CC employee, I am an independent installer of over 20 yrs. I am not condoning the work that CC did and YES some things are better off not being done or at least do it with some customizing. Take a look at the receipt written by the dealership, also take note of the total hrs for repair ( 44 +5 =49 not 51) also take a lok at the tax section, tax is due on parts not labor. http://www.gmfullsize.com/forum/showthread.php?t=113368

this post has been up for a few days, I saw it on another forum on monday and it had a lot more info given than there is now. This guy had a receipt for repairs and the handwritting was worse than a 12 yr old. Some of the things listed for repair were completely not related to a radio install. In the last 2 days there have been several replies to this topic on the forum where I saw this post originally. ( I am not naming the forum because I do not know if it is ok with this forum). In fact one of the original installers ( so says the installer) and the service mgr have replied and say that th

what interface module did you use? to get the radio shut off right after ign is shut off, just run a new wire to the ign switch wiring and tap into the brown wire, that will provide power in the acc & on position. the green wire should be at the radio harness, if you had auto speed compensated sound control on the factory radio ps, your grammer need a little work, not being mean but......

I thought that these could not be shipped out of state and have the rebate also, when misfit posted this his rep told him no out of state sales allowed, how are these guys getting away with it?

any ideas , I thought I would try here before trying to get the info from Apple, the lst time I tried to get an answer it took a week for them to get back to me.

does anyone know what the milivolt output on a nano ipod is. I think it must be quite low, I had mine hooked into my home stereo last night thru an aux in and I had to have the volume on the ipod all the way up and the stereo volume up much higher than I normally have it to just get a listenable level, thanks for any help

just curious what shop did the first install for you and what year is your truck.

it's a 94 fullsize bronco, I fiqure about 3.6 cf per pair, sound about right ? want to tune @ 40 hz with a sub sonic filter around 25 hz.

has anyone here had experiance with the pioneer w3001 d4 subs, I got a buddy wanting to use 4 in a ported box and I am wondering if he should be looking at something else. He'll be using 1 powerbass 3000d amp on each pair. any thoughts?

we lost a great guy yesterday. I really liked his show and the rods they built. seemed like a personable guy and sometimes a hard ass but he did have a business to run.

Ok, I'm a dummy what date will your anniversary be the 3 years there are no 29th of feb? any way congrats and may it be long lived.

Well, the law says that the video screen can't be "visible from the operator's seat" while a movie is playing and the car isn't parked with the parking brake on, so all you would need is something to make it temporarily not visible from the operators seat while everybody else watches a movie. just go to a tack shop ( horse supplies) and get a set of side blinders, cheap and effective[/u]

the ant is matched to the length of the cable kinda like cb ant's have to be matched for the swr and when you cut out a section larger than a couple of inches it screws the signal up. I have had to splice and solder a cable that was pinched and it worked well and yes I have tried to cut the cable down shorter and had recption issues, when I did a test by adding the cut out section back in the recption was much better, so I had to replace the ant & full cable.

The guy on their website is lookin' at me like he wants to swindle me out of my money or somethin' hey come on thats my cousin and he wouldn't rip anyone off he only needs to feed my nieces and nephews, all 12 of them.

WOW, slightly angry, someone cut you off today? can't wait for that new pio- nav that works off of telepathic wavelenghts. all you got to do is think about where you are going or the music you want to play. also supposed to come with a hat with built in electrodes that monitors electric signals thru your hair and ears in case you can't think straight or clear.