abre

The problem is likely to be because you did the RenewallFLib mod... Which is not required. All you needed was the download of the software from post 1, that download already includes the file fixed by Pionara. Reinstall without doing the RenewallFLib mod

yes

Hi, I have a 3rd party reverse camera on my F30-BT. The camera is powered off the reverse lights. The head unit camera trigger is switched from the gearbox reverse switch and connected to the relevant input on the head unit. Obviously there is the video feed from the camera to the head unit. There is a system setting for the polarity of the camera input switching from the reverse switch. But that is all, it should just work when you select reverse. Hallo, ich habe ein 3rd-Party Rückfahrkamera auf meinem F30-BT. Die Kamera wird die Rücklichter mit Strom versorgt. Die Kopfeinheit Kame

Read the first post all the information is there!!!

Sobald Sie Testmodus zur Sicherung Ihrer Kopfeinheit verwendet haben, sollten Sie dann mit dem neuen KarteninstallationsSD, dass ich nehme an, Sie haben . In der Regel das Upgrade ist eine komplette Software und Karte installieren , weiß ich nicht, wie man nur die Karten zu ersetzen, das ist, was ich denke, was Sie tun möchten . Sie sind dabei, das Forum zu durchsuchen, um zu haben, wenn das ist, was Sie tun möchten . Once you have used testmode to backup your head unit you should then use the new map installer SD, that i assume you have. Usually the upgrade is a complete software and

so haben Sie die supertestmode Schlüssel aus dem Link ich dir gegeben habe heruntergeladen ? Wenn Sie haben, diesen Schlüssel zu kopieren, dann auf die SD-Karte sollte dann aktiviert Testmodus auf dem Hauptgerät . Aber seien Sie vorsichtig im Testmodus können Sie Ziegel Ihr Navi . l schlage vor, Sie verwenden Google translate auf die Themen sorgfältig zu lesen , so dass Sie einen Fehler machen, nicht ! so have you downloaded the supertestmode key from the link i gave you? If you have, then copy this key on to your SD card this should then activate testmode on your head unit. But

There should be a speed pulse wire on the car to connect the at nav to. But you'd need to seek advice from a Hyundai dealer or owners club or a workshop manual to locate it.

Uli you should use Supertestmode from here on an AVIC F940-BT Uli sollten Supertestmode von hier auf einer AVIC-F940 BT nutzen its in post 4 from Pionara ihrer in der Post 4 von Pionara http://avic411.com/i...e-401/?p=259316 use google translate to help with your English ;o)

Uli you should use Supertestmode from here on an AVIC F940-BT Uli sollten Supertestmode von hier auf einer AVIC-F940 BT nutzen its in post 4 from Pionara ihrer in der Post 4 von Pionara http://avic411.com/index.php?/topic/35674-testmode-and-firmware-401/?p=259316 use google translate to help with your English ;o)

Read through this thread http://avic411.com/index.php?/topic/81488-2015-european-map-update-for-pioneer-avic-f30bt-f930bt-f9310bt-f40bt-f940bt-f840bt-f8430bt/ I think this will give you what you want, I'm fairly sure someone reports doing a F20-BT, just read the thread fully first

Going off topic here but so many comments about this in this thread... From v3 software onwards the AVIC F30/40-BT (930/940) need a 3rd party Database for speed cameras from POIbase.com You load the database on to your head unit via SD card and then It will alert you. Note the head unit doesn't detect, it just warns you of cameras logged in the database against your GPS location. That said I used POIbase for a year as I got a free subscription with the satnav. But I ditched it for CameraAlert from Pocket GPS World that runs on my phone and alerts via Bluetooth to the head unit regar

It's on the Pioneer Here map upgrade site http://www.navigation.com/is-bin/INTERSHOP.enfinity/WFS/Navteq-NavteqEurope-Site/en_GB/-/GBP/ViewProductDetail-Start;pgid=x5FaEXLf3axSR0lHHpni0xFT0000ZM-pyzIy;sid=p20IiqpD_wMIiv_izDtKgqBJ8MOCNP3tLdMPG1ug?ProductUUID=O4YKCghB1s0AAAE2e8YisL9t&CatalogCategoryID=O14KCghB3zMAAAE22O8isLvB Only £125...

I have to agree with you, I have a F30BT which is the same as an F40 following upgrade to v4. There is no option to display current road speed in any of the standard menu options unless it's a function coupled with the Eco mode? Not bothered trying that, I know how thirsty my beast is, I don't need reminding by my Satnav!

It certainly is quiet! If you are at v4 then you just need the files posted by Pug in post 1 of the avic411 link in my previous response, you'll also need the crack file from Pionara linked in the same post. BTW running on v4 or v5 there is no difference between a F930/F30 and a F949/F40 bar the front panel name badge... If you have no luck with the files let me know and I'll see if I still have a copy somewhere... I tend to delete once installed successfully. Andrew

The update is part of the map upgrade which included the v4 features. http://www.navigation.com/is-bin/INTERSHOP.enfinity/WFS/Navteq-NavteqEurope-Site/-/-/-/View-Promo?&Page=New_Pioneer_Landing&NewDomainName=Navteq-NavteqEurope-Site&ProgramUUID=mfMKCghBfCwAAAEwB.cx.gjp&utm_campaign=Navteq-Partnership&utm_medium=oemreferral&utm_source=Pioneer_EU There is a thread on here for upgrading to the 2013 maps and that includes the v5 upgrade http://avic411.com/index.php?/topic/37407-2013-eu-update-f30-f930-f9310-f40-f940-f840-f8430/ It may be possible to upgrade