cjmartin315

I was hoping one of the great resources here could put me onto the easiest place is to tap the reverse wire for the 2009 Toyota Matrix S AWD. I am reinstalling my AVIC-D3 that I removed form my 2006 model that I traded in. Thanks Jay

I was hoping one of the guys here would know where the best place was to tap for reverse wire for 2009 Matrix. I am going to put my D3 in the trix and my FJ is going to get a new toy...probably an AVIC F series. On my last matrix I went all the way to the tail light, but I am sure there is a better way. Thanks as always for your help Jay

Thanks, I will tackle it as soon as the OEM nav trim piece arrives and my radio arrives. Thanks Jay

Can someone let me know where the VSS tap is on this vehicle? Thanks Jay

Sorry to see what happened. I am in WV about 2 hours from Pittsburgh. I have installed 3 of these in Fords and Toyotas, along with a similar one in a Honda. I am not a shop. Do you need a replacement dash piece (the one that he glued the trim ring on)? Do you know if he cut the car plug off or if he used the adapter harnesses that most of us use from either Metra or Schoche? If he didnt hack into the wiring, and you get the double din kit and the wiring harnesses we need I and you dont mind the drive, I could help you do it. In general, they are pretty easy. You need to know how to get t

Thanks a lot! Jay

I found a post here asking about VSS info for a 2007 Toyota Matrix and posted info about a 2004, but we just bought a 2006 Toyota Matrix that we want to install a D3 in and were wondering where the VSS wire was and where the best place to steal reverse power was (without going to the taillights unless it is best) for this year. Thanks Jay

Yes you get the fancy logos with the 920. I have in 2 of my vehicles, and it works in both. Jay