SME

I went into the dash and found the GPS antennae was hanging down. Remounted it and now good to go. whtcrxghst- thank you for your help SME

That's what I'm thinking, because everything else works with the exception of what I mentioned. I checked the speed pulse so that ruled out the VSS. I have my antennae mounted under the dash so I'll check that this weekend.

Had my Z2 stolen from my truck and purchased a refurbished Z2 as a replacement. I had a different installer who also installed an alarm system with remote start. The navigation isn't working either. Now that you have some background, he put in the bypass but in the connection status, I get: GPS: ok, but no satellites Emergency brake: On when it isn't in the vehicle dynamics screen speed and rpm are unavailable. I'm thinking a problem with VSS wire, Any suggestions?

Bigred- I had the same problem, it took 3 CD's before I got the image onto a good disk. At least I think it was the disk. I used ROXIO to burn and the last time I remember it referring to burning the "image" to the disk. After that, I followed Hyperite's directions and it went without a hitch. I'm not a techie, but have ripped CD's before. My theory is your software has to recognize the file as an image. Good Luck! Stan

I think you skipped step 3 of my instructions Ok guys, I got it updated. I had to go through 3 CD-R's to get the update to take but finally "got 'er done!" Now just need to do the 2-wire and I'm set. Thanks again!! You guys Rock!!

I just did thye update from Hyperite's download and instructions. My Z2 is an Apr 07 build. Can't remember if my software was Version 1. but now it's reading Ver 2. However, I couldn't tell if it updated or not because it never said one way or the other. After I inserted, it said CD-ROM inserted and nothing else. Checked Service Info in Settings and now says Ver 2. I don't have the 2-wire installed yet, so can't say it's bypassed. Any comments? Did you hit map, and answer yes to the update question? It goes through some gyrations that take about 10 minutes. if you didn't see

I just did thye update from Hyperite's download and instructions. My Z2 is an Apr 07 build. Can't remember if my software was Version 1. but now it's reading Ver 2. However, I couldn't tell if it updated or not because it never said one way or the other. After I inserted, it said CD-ROM inserted and nothing else. Checked Service Info in Settings and now says Ver 2. I don't have the 2-wire installed yet, so can't say it's bypassed. Any comments?

DB- Man you have alot of patience!

Hyperite- Thanks for your help, was there anything else on the update disc relevant to Z2s? Nope, this is all you need... Thank you , Sir

Hyperite- Thanks for your help, was there anything else on the update disc relevant to Z2s?

I placed my xm antennae on my dash and haven't had any majors problems.

What is the manufacture date of the bypassable Z2? I just had an Apr '07 installed in my truck.

I saw one on display at the Circuit City, Fredericksburg, VA. They listed it at $2295.