taytaythatsme04 Posted February 17, 2008 Author Report Share Posted February 17, 2008 ok now I got the right signal wire but the camera is all black when brought up on the screen.... any ideas?? Thanks T Quote Link to post Share on other sites
HiFiSi Posted February 17, 2008 Report Share Posted February 17, 2008 Is the camera's video output hooked to the correct input? It's the brown RCA connector on the D3. Quote Link to post Share on other sites
taytaythatsme04 Posted February 17, 2008 Author Report Share Posted February 17, 2008 Is the camera's video output hooked to the correct input? It's the brown RCA connector on the D3. yes, the one labeled "Rear View Camera Input" T Quote Link to post Share on other sites
Nomar1245 Posted February 21, 2008 Report Share Posted February 21, 2008 I dont mean to jack your thread, but how did you get your amp to power on? I'm having the same problem, and I've tried 2 amps, and tested all the power wires. If you dont want to get off track, you could just send me a PM. I'm going away soon and I'd really like to know what the problem is. Thanks Quote Link to post Share on other sites
davemonkee Posted February 21, 2008 Report Share Posted February 21, 2008 is the camera hooked up to switched power or is it hooked up to the reverse wire. the camera should be powered to a switched source, if not it will only work in "reverse" and not on map/split screen Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.