rolloutjg Posted March 7, 2009 Report Share Posted March 7, 2009 i had best buy do the bypass while they installed everything, and it doesnt have to be in park to work, just either stopped or going super slow. and also that window pops up when it starts up saying improper parking break lead. and they did the bypass before i loaded the iso file, can i still do it now? i tried it but it didnt load or do anything. any ideas?? Quote Link to post Share on other sites
Hyperite Posted March 7, 2009 Report Share Posted March 7, 2009 bypass was not done correctly Quote Link to post Share on other sites
rolloutjg Posted March 7, 2009 Author Report Share Posted March 7, 2009 bypass was not done correctly well i figured that. do u think he just did the one wire instead of both?? Quote Link to post Share on other sites
garrettoomey Posted March 7, 2009 Report Share Posted March 7, 2009 Yes, they only grounded the parking brake and did not connect the 2nd wire correctly (or at all). Quote Link to post Share on other sites
MIGGERNAUGHT Posted March 8, 2009 Report Share Posted March 8, 2009 i just fixed this on mine, its the bottom right hole in your "connector 2" plug. just pull the mute wire out of connector one and stick it in connector 2 and ground it! if you are getting that message then you arent properly grounded in 1 of 2 places. that one and your parking break wire need to be grounded. good luck! Quote Link to post Share on other sites
MIGGERNAUGHT Posted March 8, 2009 Report Share Posted March 8, 2009 heres a pic from ducatiboys awesome write up: http://www.sminntech.com Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.