wgm5286 Posted October 21, 2006 Report Share Posted October 21, 2006 Hi, Just installrd my D1, everything works great! The bypass was a cinch, thanks for the info! But My rear camera is giving me problems. I purchased one off ebay from a recommended seller KAWAMALL with the reverse image and ir lighting for night. The pic is very unstable very wavy and sometimes rolls vertically. I spoke with the seller and he asked me what type of input i needed NTSC or PAL. Cant find any info on this anywhere, does it make a difference? Also any troubleshooting tips? Thanks for any help. Quote Link to post Share on other sites
sportsfan21 Posted October 21, 2006 Report Share Posted October 21, 2006 Yes it does make a difference. You need NTSC. Quote Link to post Share on other sites
wgm5286 Posted October 21, 2006 Author Report Share Posted October 21, 2006 thanks! Quote Link to post Share on other sites
Mo-D Posted October 21, 2006 Report Share Posted October 21, 2006 OK, I may look retarded after this question, but I keep noticing people saying they bought their rear camera with the image reversed. Why exactly would you want the image reversed? Just so it matches the rear-view mirror? I would think that if the camera were mounted lower (like to line up your trailer hitch) you would want the image not reversed. :? Quote Link to post Share on other sites
BobyYoo Posted October 25, 2006 Report Share Posted October 25, 2006 uhh why would you want that. you will get confuse if it is not reversed. Imagine looking at the mirror when you backup, then looking at the d1 without the reversing image. You're will get confuse :roll: most camera comes with the option to reverse or not reverse. So you can choose whichever you want. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.