dle619 Posted August 17, 2009 Report Share Posted August 17, 2009 Hi, I am on the F700 with firmware 2.x installed. Is anyone on this FW tried it? Where can I get the file? Does it use both the .dll and .exe? Can someone post the files, thank you. Quote Link to post Share on other sites
touche6784 Posted August 17, 2009 Report Share Posted August 17, 2009 Don't know what Pwnin O'brien is talking about as I have IDT's mod on the X series 3.01 update and I have full functionality. touche, are you using carvers latest release? Have you replaced both your CommonLib.dll and MainMenu.exe? I don't really have many mods on my unit and the ones I do only deal with the DATA.zip files, I don't understand why I wouldn't have 100% functionality. I have played around with my unit a bit and have found that leaving the unit on the map will lock up the front panel buttons as well as the problems I described before. If you reset the unit you can access all parts of the unit. If the unit is shut down in a menu like the AV section or main menu you can go to the map and all buttons work. Quote Link to post Share on other sites
touche6784 Posted August 20, 2009 Report Share Posted August 20, 2009 I have no clue if my current problem is related to this mod but has anyone had a problem with the touch screen not responding after putting this mod in? Front panel buttons work but my unit is also much slower in loading the menu or map. I got the touchscreen to work earlier today but it stopped working again. Could it be a defective unit? Quote Link to post Share on other sites
Pwnin O'brien1287271010 Posted August 20, 2009 Report Share Posted August 20, 2009 I decided to pull off the new CommonLib.dll and MainMenu.exe and replace the old ones. Back to the bootup warning screen. Quote Link to post Share on other sites
dle619 Posted August 22, 2009 Report Share Posted August 22, 2009 can someone post me the commonlib.dll and the mainmenu.exe for the 2.x firmware, thank you. Quote Link to post Share on other sites
torres1708 Posted August 23, 2009 Report Share Posted August 23, 2009 Did you guys ever find a way to remove the nav warning? I use my F500bt strictly for navigation, and every time I startup the system it displays the warning. I would like for it to start up straight to navigation with no warnings. Any help would be appreciated... Quote Link to post Share on other sites
shadowdog Posted August 26, 2009 Report Share Posted August 26, 2009 I have upgraded to Version 3.01 and downloaded the new CommonLib.dll file from 6/2/2009, is this the updated CommonLib file for version 3.01 or is there a new one that I can't seem to find. If there is a new file, please send me link. Thanks Carver for all your help, Upgrade to Ver 3 as per your direction went extremely smooth. Tx Quote Link to post Share on other sites
Pwnin O'brien1287271010 Posted August 29, 2009 Report Share Posted August 29, 2009 Carver, Have you had any success with that bootup warning screen yet? Just gettin a little anxious. Thanks again for all your hard work!!! Quote Link to post Share on other sites
Pwnin O'brien1287271010 Posted September 9, 2009 Report Share Posted September 9, 2009 Any progress? Quote Link to post Share on other sites
f5snopro Posted September 15, 2009 Report Share Posted September 15, 2009 If I'm reading this correctly, 3.01 is still buggy and the hacks to date won't work with it, yes? Quote Link to post Share on other sites
69sixpackbee Posted September 15, 2009 Report Share Posted September 15, 2009 If I'm reading this correctly, 3.01 is still buggy and the hacks to date won't work with it, yes? Still in progress.. Quote Link to post Share on other sites
jml2008 Posted September 20, 2009 Report Share Posted September 20, 2009 If we can't remove the warning screen for now can we at least make the button much much bigger so at least it will be easier to find and press while driving, because I'm always moving by the time that screen pops up. Quote Link to post Share on other sites
Steelth Posted September 24, 2009 Report Share Posted September 24, 2009 I used this mod on F900bt FW 3.010100 and I lost sound on iPhone incoming of outgoing no sound. I returned to my back up files and added video.exe and av.exe back and I got my sound back. Any help? I added commonlib.dll and I still get navigator warning back. Play DVD while driving warning is there obviously. Quote Link to post Share on other sites
69sixpackbee Posted September 25, 2009 Report Share Posted September 25, 2009 I have just learned to live with the nag screen. Just one more screen tap to contend with and is not near as much of an issue with me as losing functionality Someday this will get resolved. Just stay tuned and keep your system stock for now. Bud Quote Link to post Share on other sites
shawnmos Posted October 8, 2009 Report Share Posted October 8, 2009 any progress? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.