DonTat Posted January 31, 2010 Report Share Posted January 31, 2010 Hi, I have done the 3.0 upgrade and have seen references to a 3.1 or 3.01 update. I cannot find any reference to this update on Pioneer's site. The only references I can find to it on this site don't mention where to get it or the links referred to are broken. I have the F90bt. The 3.0 upgrade went great, thanks to all here for there help. Is the 3.01 update for my unit? Do I need it? Where can I get it? Thanks in advance folks. Don Quote Link to post Share on other sites
cdnite Posted February 6, 2010 Report Share Posted February 6, 2010 I'd also like to know about a 3.1 update. Quote Link to post Share on other sites
basmoq Posted February 6, 2010 Report Share Posted February 6, 2010 Try http://www.pioneerelectronics.com/PUSA/Products/CarAudioVideo/In-Dash/GPS-Navigation-Systems/AVIC-X910BT?tab=F, you were looking in the wrong place as they are referring to the update for the x units, which is what the 3.0 update essentially gives you... Quote Link to post Share on other sites
DonTat Posted February 8, 2010 Author Report Share Posted February 8, 2010 I just got a little lost...I've seen in posts that several people with f90bt have done the 3.01 upgrade. am I misunderstanding? Should I apply this 3.01 upgrade you included the link for to a f90 if I already have the 3.0 upgrade? Sorry, don't mean to be dense...but probably, I am Quote Link to post Share on other sites
Hover-Shuttle Posted February 25, 2010 Report Share Posted February 25, 2010 YES, That is the correct link for the V3.01 update... I installed it on the two of my USA '900BT's (back in August)... with the V3.0 update. They work perfectly... Raymond Quote Link to post Share on other sites
eak Posted March 10, 2010 Report Share Posted March 10, 2010 YES, That is the correct link for the V3.01 update... I installed it on the two of my USA '900BT's (back in August)... with the V3.0 update. They work perfectly... Raymond Hi Raymond! This thread was started by F90BT owners and I (also being an F90BT owner) would like to know if 3.01 (and 3.02) can be loaded on the F90BT? Thanks! EAK Quote Link to post Share on other sites
nissanfrontier Posted March 10, 2010 Report Share Posted March 10, 2010 I loaded the 3.02 on my 90bt today without issue. Got it from the 910 link on pioneers website. Followed the directions as posted there, I was coming from 3.01. There may be some sort of WINCE upgrade needed if not coming form 3.01, I don't remember it has been awhile since i loaded that one. Quote Link to post Share on other sites
eak Posted March 10, 2010 Report Share Posted March 10, 2010 I loaded the 3.02 on my 90bt today without issue. Got it from the 910 link on pioneers website. Followed the directions as posted there, I was coming from 3.01. There may be some sort of WINCE upgrade needed if not coming form 3.01, I don't remember it has been awhile since i loaded that one. Howdy! Im at 3.003. How do you get from 3.003 to 3.01 on a 90BT? Ive been asking but haven't gotten any responses. Can you go directly from 3.003 to 3.02? Thanks! Quote Link to post Share on other sites
nissanfrontier Posted March 10, 2010 Report Share Posted March 10, 2010 I don't know if there is a difference between 3.003 and 3.01. And I am not saying to try this as I did as I am not responsible for a bricked unit: I downloaded the update here http://www.pioneerelectronics.com/PUSA/ ... port?tab=B I then followed the directions on the same page. it loaded up and started up fine for me. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.