sstrange Posted March 5, 2010 Report Share Posted March 5, 2010 Hi, I purchased the 3.02 map upgrade. I am now trying to boot in test mode. I can not boot any longer from the cf card. I contacted Pioneer and they told me that booting off of the cf card has been disabled. Is there a way around this? Thanks! Quote Link to post Share on other sites
VBLUE42 Posted March 5, 2010 Report Share Posted March 5, 2010 Which version of testmode do you have? I have 3.02 and I can boot to testmode all day long. Quote Link to post Share on other sites
CdRSKuLL Posted March 8, 2010 Report Share Posted March 8, 2010 I'm using 2.3 testmode.. ( http://www.cdrpro.co.uk/testmode.zip ). Running 3.020200 version Try the above one. Steve Quote Link to post Share on other sites
VBLUE42 Posted March 8, 2010 Report Share Posted March 8, 2010 There is no 3.020200 in the US. The currant update here is 3.020100 so that may be the issue. Contact forum member carver. He is the one that made testmode work on 3.0. Quote Link to post Share on other sites
Dragonrep Posted March 11, 2010 Report Share Posted March 11, 2010 The latest Pioneer update for the F series IS 3.02002. I just purchased and updated my unit with it over a week ago. Quote Link to post Share on other sites
VBLUE42 Posted March 11, 2010 Report Share Posted March 11, 2010 That version is not available for download on the website. The latest version available for download is 3.020100. Anyway, have you run testmode 2.3 on it yet? Quote Link to post Share on other sites
gwilli3272 Posted March 14, 2010 Report Share Posted March 14, 2010 I just did the 3.02 update on 2 F90BT's and I can not get into test mode on either of them. I am going to roll it back to 3.01 if possible. I will not go with 3.02 at all, that is some BS from Pioneer. I stand corrected! I was able to get into CE mode on mine, but not my wife's. So I am going to try to do the 3.02 upgrade on my wife's Xterra again, hoping that it does the trick. I did mess with the data.zip file before I did the update on her vehicle. That might have been the problem. Hopefully the update will go through, since it is on there right now, it does say version 3.02, so I do not know. I may have to roll it back to 3.01 and then do the 3.02 upgrade again. Not fun. Quote Link to post Share on other sites
VBLUE42 Posted March 14, 2010 Report Share Posted March 14, 2010 What is the full version number you are talking about? Version 3.020100 runs testmode without problem. Quote Link to post Share on other sites
gwilli3272 Posted March 14, 2010 Report Share Posted March 14, 2010 Version 3.020100 is what the download says. On the unit in my car I can access test mode, just not in the wife's. I need to know if there is a way to roll it back to a previous version. That would be great, so then I could try to get the update properly done on the wife's vehicle. Quote Link to post Share on other sites
VBLUE42 Posted March 14, 2010 Report Share Posted March 14, 2010 Copy your flash disk contents to her unit. Quote Link to post Share on other sites
gwilli3272 Posted March 14, 2010 Report Share Posted March 14, 2010 I would have done that if I could have gotten into test mode to access CE, but it was not letting me into that at all. I had to reinstall 3.0, then reinstall 3.01, and then reinstall 3.02. What I did wrong was doing the software bypass before installation of 3.02. Now that I have reinstalled 3.02, I can access test mode and CE, did the software bypass, and then made the Navi warnings go away, talking about annoying. Sorry to have thread jacked, just needed to find some help somewhere with my problem. I started a topic about it, had 11 views and no one offered up anything. Back to the topic of this thread. 3020200 is the Europe update, and is not available in the US at all. If you live in the states and have this update, I would imagine that it is going to tell you that your in the US but operate really weird like. If you live in Europe then congrats. Quote Link to post Share on other sites
Dragonrep Posted March 19, 2010 Report Share Posted March 19, 2010 I have the Pioneer 3.02002 for the US in my hand right now, and installed on my F700bt about 2 weeks ago. Yes, I purchased it from Pioneer, it came with the new maps. I can get into test mode no problem, and I am running Diaftia's mod. Just came back from a trip to Charlotte, N.C. (from and back to NE Florida). The only problem was a 32Gig memory stick full of music, the unit didn't want to read it (imagine that). Otherwise the U.S. and Canada version 3.02002 IS available and works fine. Quote Link to post Share on other sites
VBLUE42 Posted March 19, 2010 Report Share Posted March 19, 2010 Are you talking about 3.020200 or 3.02002? Quote Link to post Share on other sites
ckelly33 Posted March 23, 2010 Report Share Posted March 23, 2010 I've been off this forum for a few months - but is 3.02 the same as what I bought from Pioneer in July and then was shipped in August? Maybe it was 3.02 but I was thinking it was simply '3.0'. I went to Pioneer's website (specifically for the F90BT) and when I clicked on the update tab:(http://www.pioneerelectronics.com/PUSA/ ... 90BT?tab=F) , there was only downloadable updates for 2.0, nothing at all for 3.0. 3.0 isn't even mentioned in the firmware changelog! What is 3.02 and/or 3.0202002 (or whatever)? Just tell me I don't have to buy it too! Quote Link to post Share on other sites
VBLUE42 Posted March 23, 2010 Report Share Posted March 23, 2010 3.0 is purchase only. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.