gwilli3272
Members-
Content Count
48 -
Joined
-
Last visited
About gwilli3272
-
Rank
Member
Profile Information
-
Location
San Diego, CA
-
No sound from navigation guidance and bluetooth
gwilli3272 replied to gwilli3272's topic in Problems/Troubleshooting
NVM, I got it figured out, and was not the unit, but someone had flipped a switch on my 4 channel amp to 2 channel, which then only gave the option of balance and no fade, which then rendered voice guidance and sound from blue tooth inoperable. -
Just as it says, navigation guidance and blue tooth both have no sound. Also I have noticed when i press the menu button there is no sound either. There is sound from the iPod, radio, CD, and DVD. I am stumped on this one, any help would be much appreciated as I do not have the money to replace the unit at all. I have tried a full system restore as well, and have tried setting it all back to the factory setting. Nothing.
-
Any info on having this fuel report installed on the F series units?
-
http://www.megaupload.com/?d=K0WJSCUR http://www.megaupload.com/?d=XDPTH67G Try those, if you would actually look you would have found them for yourself. Let us know if you want someone to stop by to do this for you. You only need 1 SD card (2 gig) to get this done, follow the directions, it is really that damn easy.
-
After doing the 3.0 update, you can not just jump to 3.02, you first have to do the 3.01 update. The 3.01 update can be found here: ftp://www.turboss.com/ login: avicuser pword: Avic411 3.02 is downloaded from the pioneer website.
-
Brian the information is on page 48. Here it is again though. ftp://www.turboss.com/ Found that in the problems and trouble shooting section for the 3.01 update. There is a login and password to get to download the information. login: avicuser pword: Avic411 3.02 is downloaded from the pioneer website.
-
It does not get any simpler than this, if you can not handle this then I would suggest finding someone in your area that can handle this. This is really easy, follow each step in order. Print this out after you have downloaded the information. Then put the required files on the SD card and go to your unit, there should be only 4 files on the SD card: My Flash disk, WinCEIMG.bin, WinCEIMG.cks, and test mode. Go to unit, turn unit on, immediately press reset, eject, menu, and map buttons at the same time. After abotu 30 seconds you may hear a pop from your speakers, release the reset button
-
The new maps are included in the unofficial 3.0 update.
-
That sucks But that is okay, I have done the Diaftia's mod. It is running pretty good, just kinda slow.
-
I have a question for this mod. Does this mod include getting rid of those nagging NAVI warnings. If it does this is the next mod that I will be putting on my F90BT which is now the X910BT.
-
Don Tat, do the 3.0 upgrade, much smoother operation than the 2.X versions. After that you can find the 3.01 update floating around on here somewhere, I do not remember exactly where I found it, but I do remember the login ID and password which I have posted about. Then download the 3.02 update from Pioneer, after you install the 3.02 update, then go back in under test mode to access CE, do the software bypass, easy and many write ups on here about that one. Very much worth it.
-
I would have done that if I could have gotten into test mode to access CE, but it was not letting me into that at all. I had to reinstall 3.0, then reinstall 3.01, and then reinstall 3.02. What I did wrong was doing the software bypass before installation of 3.02. Now that I have reinstalled 3.02, I can access test mode and CE, did the software bypass, and then made the Navi warnings go away, talking about annoying. Sorry to have thread jacked, just needed to find some help somewhere with my problem. I started a topic about it, had 11 views and no one offered up anything. Back to the
-
3.02 problem, can not access test mode
gwilli3272 replied to gwilli3272's topic in Problems/Troubleshooting
Well 11 views, no input from anyone, and I figured it out. Had to reinstall 3.0 to roll the unit back out of 3.02. After reinstalling 3.0 I was able to then access test mode. Now I am putting 3.01 back onto the unit, and then 3.02. Hopefully all goes right so that I can then access test mode to do software bypass and make the Navi warnings go away.