gwilli3272

Yes this worked with the FX3.1 firmware update for Q4 2011 maps. Once you delete the maps on your unit to be able to fit this mod onto the unit you have to replace the maps. So if you do not have the maps then you need to download them all over again.

Once you delete your map files, the unit will go into a restart loop. To fix that you need to replace the map files into the unit.

NVM, I got it figured out, and was not the unit, but someone had flipped a switch on my 4 channel amp to 2 channel, which then only gave the option of balance and no fade, which then rendered voice guidance and sound from blue tooth inoperable.

Just as it says, navigation guidance and blue tooth both have no sound. Also I have noticed when i press the menu button there is no sound either. There is sound from the iPod, radio, CD, and DVD. I am stumped on this one, any help would be much appreciated as I do not have the money to replace the unit at all. I have tried a full system restore as well, and have tried setting it all back to the factory setting. Nothing.

Any info on having this fuel report installed on the F series units?

http://www.megaupload.com/?d=K0WJSCUR http://www.megaupload.com/?d=XDPTH67G Try those, if you would actually look you would have found them for yourself. Let us know if you want someone to stop by to do this for you. You only need 1 SD card (2 gig) to get this done, follow the directions, it is really that damn easy.

After doing the 3.0 update, you can not just jump to 3.02, you first have to do the 3.01 update. The 3.01 update can be found here: ftp://www.turboss.com/ login: avicuser pword: Avic411 3.02 is downloaded from the pioneer website.

Brian the information is on page 48. Here it is again though. ftp://www.turboss.com/ Found that in the problems and trouble shooting section for the 3.01 update. There is a login and password to get to download the information. login: avicuser pword: Avic411 3.02 is downloaded from the pioneer website.

It does not get any simpler than this, if you can not handle this then I would suggest finding someone in your area that can handle this. This is really easy, follow each step in order. Print this out after you have downloaded the information. Then put the required files on the SD card and go to your unit, there should be only 4 files on the SD card: My Flash disk, WinCEIMG.bin, WinCEIMG.cks, and test mode. Go to unit, turn unit on, immediately press reset, eject, menu, and map buttons at the same time. After abotu 30 seconds you may hear a pop from your speakers, release the reset button

The new maps are included in the unofficial 3.0 update.

That sucks But that is okay, I have done the Diaftia's mod. It is running pretty good, just kinda slow.

I have a question for this mod. Does this mod include getting rid of those nagging NAVI warnings. If it does this is the next mod that I will be putting on my F90BT which is now the X910BT.

Don Tat, do the 3.0 upgrade, much smoother operation than the 2.X versions. After that you can find the 3.01 update floating around on here somewhere, I do not remember exactly where I found it, but I do remember the login ID and password which I have posted about. Then download the 3.02 update from Pioneer, after you install the 3.02 update, then go back in under test mode to access CE, do the software bypass, easy and many write ups on here about that one. Very much worth it.

I would have done that if I could have gotten into test mode to access CE, but it was not letting me into that at all. I had to reinstall 3.0, then reinstall 3.01, and then reinstall 3.02. What I did wrong was doing the software bypass before installation of 3.02. Now that I have reinstalled 3.02, I can access test mode and CE, did the software bypass, and then made the Navi warnings go away, talking about annoying. Sorry to have thread jacked, just needed to find some help somewhere with my problem. I started a topic about it, had 11 views and no one offered up anything. Back to the

Well 11 views, no input from anyone, and I figured it out. Had to reinstall 3.0 to roll the unit back out of 3.02. After reinstalling 3.0 I was able to then access test mode. Now I am putting 3.01 back onto the unit, and then 3.02. Hopefully all goes right so that I can then access test mode to do software bypass and make the Navi warnings go away.

Version 3.020100 is what the download says. On the unit in my car I can access test mode, just not in the wife's. I need to know if there is a way to roll it back to a previous version. That would be great, so then I could try to get the update properly done on the wife's vehicle.

I know something did not go right with the update to 3.02 since I should be able to still access test mode, bit o can not. Unit is the F90BT. Do have to reinstall a 2.X version or the 3.0 to roll it back that way because I can not access test mode at all at this point.

I just did the 3.02 update on 2 F90BT's and I can not get into test mode on either of them. I am going to roll it back to 3.01 if possible. I will not go with 3.02 at all, that is some BS from Pioneer. I stand corrected! I was able to get into CE mode on mine, but not my wife's. So I am going to try to do the 3.02 upgrade on my wife's Xterra again, hoping that it does the trick. I did mess with the data.zip file before I did the update on her vehicle. That might have been the problem. Hopefully the update will go through, since it is on there right now, it does say version 3.02, so I do not k

Okay, downloaded, sent to the SD card, and installed onto my F90BT, service information now reads version 3.01. So now I am going to do the 3.02 update after I do the 3.01 update to my wife's Xterra.

ftp://www.turboss.com/ Found that in the problems and trouble shooting section for the 3.01 update. There is a login and password to get to download the information. login: avicuser pword: Avic411 I have not tested nor used this as of yet. I do plan on it though. As I want to use the 3.02 update. After I try this I will report back my findings.

Server: ftp://www.turboss.com User: avicuser Password: Avic911 No longer works. Does anyone know where else 3.01 can be obtained? Pioneer no longer offers this as a download, you now have to order it from them. I already have the 3.02 download but need the 3.01 update installed before you can update to 3.02. Correction, password is not Avic911, remember the name of the forum and you will be able to get into this.

Moving the mic will correct your problems. Since most of the mic's on the market do not block out background noise, your only fix is where you have your mic at. The Scion TC is a noisy car to begin with, way too much road noise and everything else. So the people that hear you on the phone are getting mostly back ground noise instead of your voice. I have mine above the sun visor in my G35, sine that is a spot where no wind is rushing by it and I have almost zero road noise.

Alarm provided for by .50 cal Desert Eagle. Hahahaha, make my day punk!

Look into the hack and mods listing in the forum. There is the unofficial 3.0 update which has the WINCE update and the map updates, the unofficial update brings your F series up to the X series.

Mine has always charged on my F90BT, never once had any issue what so ever.