narcolept Posted June 23, 2010 Report Share Posted June 23, 2010 Well you have been lost on this forum for about a week now. But what he was saying is, its not going to happen. I think you're just saying that for the sake of saying no... Quote Link to post Share on other sites
VBLUE42 Posted June 23, 2010 Report Share Posted June 23, 2010 Yea pretty much. Quote Link to post Share on other sites
m5james Posted June 23, 2010 Author Report Share Posted June 23, 2010 F'k you blue. I'm not lost at all, I'm asking for questions as to why instead of listening to your ass. Like I've said before, if we can't ask questions and you have all the answers, then we might as well close the forums. Is there a reason your such an arrogont f'k...you've proven you can be a dick, so why don't you just answer my posts. Between you and your little bitch Narco, I'm sure there will be others who can give answers without being asses. Quote Link to post Share on other sites
m5james Posted June 23, 2010 Author Report Share Posted June 23, 2010 Well you have been lost on this forum for about a week now. But what he was saying is, its not going to happen. I think you're just saying that for the sake of saying no... Narcolept...suckin Blue's *edited* since May 24th. Quote Link to post Share on other sites
VBLUE42 Posted June 23, 2010 Report Share Posted June 23, 2010 Well we wont be seeing him again. Quote Link to post Share on other sites
VBLUE42 Posted June 23, 2010 Report Share Posted June 23, 2010 I am really surprised to see a response like this from him. Honestly this was all in good fun. However when you start resorting to profanities you cant expect to be able to contribute on here anymore. Quote Link to post Share on other sites
narcolept Posted June 23, 2010 Report Share Posted June 23, 2010 Maybe, if someone else wants to do it, he can be replaced through software, then we wouldn't need him to be a real person? Don't say no so quickly, I'm sure since there's human hardware, someone else other than me can go ahead and write the code , while I sit here and hope.. K, I'm done now.. Quote Link to post Share on other sites
BorisM Posted June 23, 2010 Report Share Posted June 23, 2010 F'k you blue. I'm not lost at all, I'm asking for questions as to why instead of listening to your ass. Like I've said before, if we can't ask questions and you have all the answers, then we might as well close the forums. Is there a reason your such an arrogont f'k...you've proven you can be a dick, so why don't you just answer my posts. Between you and your little bitch Narco, I'm sure there will be others who can give answers without being asses. No, you're not lost, just militantly clueless. Quote Link to post Share on other sites
FourG Posted June 24, 2010 Report Share Posted June 24, 2010 I was with you, but then you lost me on the zone 1 front and zone 2 rear...does this mean with programming that it may be possible? I haven't seen other AVIC units in person that have seperate A/V, so I'd guess an option would need to be added to the GUI as well. Sorry, what I meant to say was until we know how the software talks to the uCOM device, which in turn sends commands to the e-Volume unit for source selection, there isn't a known way to do multi-zone. And looking at that block in the schematic, there is no indication that there is a way to split the audio output across two zones to begin with. It's a black box in the schematic and since software doesn't talk to it directly I'd consider it *highly* unlikely that even with GUI changes you'd get multi-zone audio (the uCOM unit may never send the commands you need it to, since it seems to be a fixed-function device with no firmware you can change). You can keep wishing, wondering, suggesting and all that here on the forum, but I really think if you need it now it's time to pull the kit, sell it on eBay and get a unit that lists mutli-zone support on its box. Quote Link to post Share on other sites
1loudls Posted June 25, 2010 Report Share Posted June 25, 2010 I'm not lost at all, really? I was with you, but then you lost me on the zone 1 front and zone 2 rear... because you sound lost to me, hell you even sound lost to yourself No, you're not lost, just militantly clueless. I'm asking for questions as to why instead of listening to your ass. you can ask all the questions you want but in the end you still need to listen to the answers given. Is there a reason your such an arrogont... (a) it's arrogant, ( dont confuse arrogance with being a straight shooter that is just giving you the answers you seek. so why don't you just answer my posts. he did, you need to pay close attention. There will be no dual zone for the F series. I'm sure there will be others who can give answers without being asses. he wasn't being an ass when he gave you the answer, neither was I when i gave you the answer. Honestly, for the price that I got my F90BT, it's perfectly fine for my needs. apparently it doesn't other wise you would have gotten the idea by now. price paid & fitting your needs have nothing to do with each other, and usually end up getting in each others way and causing someone to have to settle on something that doesn't meet there needs F'k you blue...Is there a reason your such an arrogont f'k...Between you and your little bitch Narco rule #1 in not getting banned, dont cuss out a mod.lol what a jabronie enjoy just being able to read from now on Quote Link to post Share on other sites
Guest x5james Posted July 1, 2010 Report Share Posted July 1, 2010 I was with you, but then you lost me on the zone 1 front and zone 2 rear...does this mean with programming that it may be possible? I haven't seen other AVIC units in person that have seperate A/V, so I'd guess an option would need to be added to the GUI as well. Sorry, what I meant to say was until we know how the software talks to the uCOM device, which in turn sends commands to the e-Volume unit for source selection, there isn't a known way to do multi-zone. And looking at that block in the schematic, there is no indication that there is a way to split the audio output across two zones to begin with. It's a black box in the schematic and since software doesn't talk to it directly I'd consider it *highly* unlikely that even with GUI changes you'd get multi-zone audio (the uCOM unit may never send the commands you need it to, since it seems to be a fixed-function device with no firmware you can change). You can keep wishing, wondering, suggesting and all that here on the forum, but I really think if you need it now it's time to pull the kit, sell it on eBay and get a unit that lists mutli-zone support on its box. I thought it'd be cool to have, but by no means something that I'm willing to pay for via upgrading to a different unit. Sounds like it'd be more trouble that what it's worth. Quote Link to post Share on other sites
1loudls Posted July 1, 2010 Report Share Posted July 1, 2010 Sounds like it'd be more trouble that what it's worth. a lot of things can really be done with this unit to make it better, but this one really does seem on the impossible side! Quote Link to post Share on other sites
Guest x5james Posted July 2, 2010 Report Share Posted July 2, 2010 Touche. I'm fine without it, so I'll stay content with it. Thanks. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.