Pjrm68 Posted October 2, 2014 Report Share Posted October 2, 2014 Sorry for the double post (I wrote this in another thread too), but I wanted to see if anyone could respond before I try to install. I'm reading comments on the Pioneer Facebook page and now I'm confused. If I'm using an SD card to update, can I update directly from the SD slot that's built into the unit? Some people are saying that no matter what the media, it has to go through USB1. Quote Link to post Share on other sites
OverZealous Posted October 2, 2014 Report Share Posted October 2, 2014 If you didn't get a response, you can update from either USB1 or the SD slot. I used the SD slot, it was very fast. Quote Link to post Share on other sites
epsilonkore Posted October 2, 2014 Report Share Posted October 2, 2014 I used SD and it upgraded in about 8 minutes. Very fast, especially compared to previous AVIC's that I have owned. Quote Link to post Share on other sites
BAFU Posted October 2, 2014 Report Share Posted October 2, 2014 (Micro) SD card update took 15 mins start to finish. I even updated the Bluetooth as I saw a folder under the root for that, so figured what the hell. Remember to reboot the phone AND turn off/on the car to reboot NEX device after all updates. Everything working perfectly for me. Quote Link to post Share on other sites
epsilonkore Posted October 3, 2014 Report Share Posted October 3, 2014 Thanks for the bluetooth mention! I saw it and figured the main update did it as well, I will go back and verify and update as you did! Quote Link to post Share on other sites
Pjrm68 Posted October 3, 2014 Author Report Share Posted October 3, 2014 Thanks for the bluetooth mention! I saw it and figured the main update did it as well, I will go back and verify and update as you did! When you do, please let us know if that's a separate update we need to do. Thanks. Quote Link to post Share on other sites
epsilonkore Posted October 3, 2014 Report Share Posted October 3, 2014 It was not. I checked my bluetooth version after I upgraded to 1.06 and it was HW01-SW03.21.30 . I then ran the bluetooth update which took a while, after rebooting, it came back with the exact same version. I would have guessed that the 1.06 master update would handle the bluetooth as well, and I was right. Wish I knew what the version bluetooth was before I upgraded to 1.06 but I didnt take note. Quote Link to post Share on other sites
Pjrm68 Posted October 3, 2014 Author Report Share Posted October 3, 2014 Okay, good to know. Thanks for letting us all know. Quote Link to post Share on other sites
ericvic Posted October 3, 2014 Report Share Posted October 3, 2014 The BT version was exactly the same before the 1.06 update. I checked all the versions and wrote them down before I did the update and BT stayed the same. Quote Link to post Share on other sites
Sprayed Daily Posted October 4, 2014 Report Share Posted October 4, 2014 I installed using a SD Card and everything went fine. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.