ducatiboy Posted March 26, 2007 Report Share Posted March 26, 2007 is there a way to get the wire from the license plate into the car without drilling holes. If so please let me know. It really depends on the vehicle. Most vehicles have a light over the license plate, I would assume you can take that off and route the wires under that lens or with the F250 there is a wiring harness and already a hole on the back right of the cab which you can use. Most vehicles already have a hole with a grommet, you just need to find it. Quote Link to post Share on other sites
bobmun Posted March 26, 2007 Report Share Posted March 26, 2007 My envoy has a lip I ran the cable under and did not have to drill any holes. Yes I know it need's a bath. Quote Link to post Share on other sites
05Stang-GT Posted March 27, 2007 Report Share Posted March 27, 2007 is there a way to get the wire from the license plate into the car without drilling holes. If so please let me know. That would all depend on the car.... Quote Link to post Share on other sites
AndyGibson Posted March 27, 2007 Report Share Posted March 27, 2007 Anyone have any ideas on wiring a back-up cam on a Chevy Silverado ('06 classic body style), at least as far as getting into the cab w/o drilling. Any suggestions would be great. Thanks. Quote Link to post Share on other sites
brock.travis Posted March 27, 2007 Report Share Posted March 27, 2007 firewall Zip tie it to the interior portion of the frame (for protection) and run it all the way to the engine compartment and in through the firewall. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.