whtcrxghst Posted October 30, 2007 Report Share Posted October 30, 2007 Its either the bluetooth fix or the heat failure fix, or both. Either way, the 2-wire bypass should work I bought my unit in April of 2006. I am guessing that it was made in January, 2006. I sent my unit in for repair last week. They told me they updated the firmware and it should be arriving at my house sometime this week.... Is this firmware update considered the "Bluetooth Update CD" update? Should the 2 ground wire bypass work on my unit? Thanks and I appreciate all the help, guys! Nick Quote Link to post Share on other sites
kyzmyss Posted October 30, 2007 Report Share Posted October 30, 2007 I have a z2 and..... Is this method different for than that of hyperite's? In his method you'd have to unlock your hard drive. Is that required here as well? Appears you just have download the blue tooth update and then do the 2 wire bypass...is this blue tooth update similar to that of hyperite's below: http://www.megaupload.com/?d=9WRHDYJ2 Anyone? Please confirm...I am installing this unit on Friday.... Quote Link to post Share on other sites
whtcrxghst Posted October 30, 2007 Report Share Posted October 30, 2007 Yes, download the file and do the 2-wire bypass described in the stickies Anyone? Please confirm...I am installing this unit on Friday.... Quote Link to post Share on other sites
Frans96ss Posted November 23, 2007 Report Share Posted November 23, 2007 i tried doing the bluetooth download and the 2 wire mod... i had the installer do the 2 wire mod. but when insert the cd it just says there is a cd in it... and nothing happens.... i reset the head unit and the bypass worked for about 20 mins then came up with the parking brake message... can anyone help me out? Quote Link to post Share on other sites
rrmccabe Posted November 23, 2007 Report Share Posted November 23, 2007 I am unclear on this (sorry). I have read several post... I have a May 07 Z2. I downloaded Z2BypassUpdate.iso and ran that. Was successful. I took the cell phone mute wire and moved it to connector 2 in the corner and grounded it along with the reverse wire. As far as I know it works except I still get the warning when popping in a DVD. Is this normal? I am running it on the bench and would like to confirm its right before installing. If the above is correct, should I do anything else? Does the BT update apply to this one? Thanks ! Rich Quote Link to post Share on other sites
whtcrxghst Posted November 23, 2007 Report Share Posted November 23, 2007 Probably a bad burn on the update. Try burning it again or call Pioneer and ask them to send you one i tried doing the bluetooth download and the 2 wire mod... i had the installer do the 2 wire mod. but when insert the cd it just says there is a cd in it... and nothing happens.... i reset the head unit and the bypass worked for about 20 mins then came up with the parking brake message... can anyone help me out? Quote Link to post Share on other sites
whtcrxghst Posted November 23, 2007 Report Share Posted November 23, 2007 Parking brake wire, not reverse wire. Its the light green one I am unclear on this (sorry). I have read several post... I have a May 07 Z2. I downloaded Z2BypassUpdate.iso and ran that. Was successful. I took the cell phone mute wire and moved it to connector 2 in the corner and grounded it along with the reverse wire. As far as I know it works except I still get the warning when popping in a DVD. Is this normal? I am running it on the bench and would like to confirm its right before installing. If the above is correct, should I do anything else? Does the BT update apply to this one? Thanks ! Rich Quote Link to post Share on other sites
rrmccabe Posted November 23, 2007 Report Share Posted November 23, 2007 Parking brake wire, not reverse wire. Its the light green one Sorry was thinking about the reverse wire. but I meant parking brake. So update done, and the new pin on connector 2 and parking brake grounded and I should be good to go? Is the warning screen normal when starting a DVD movie? Thanks ! Quote Link to post Share on other sites
whtcrxghst Posted November 24, 2007 Report Share Posted November 24, 2007 Yep Quote Link to post Share on other sites
Frans96ss Posted November 28, 2007 Report Share Posted November 28, 2007 ok im getting pissed off i tryed this 100 times and my head unit will not read it.... i tryed extracting the files and doing it that way ect.... wtf can i do.... Quote Link to post Share on other sites
whtcrxghst Posted November 28, 2007 Report Share Posted November 28, 2007 What burning program are you using? ok im getting pissed off i tryed this 100 times and my head unit will not read it.... i tryed extracting the files and doing it that way ect.... wtf can i do.... Quote Link to post Share on other sites
Frans96ss Posted November 28, 2007 Report Share Posted November 28, 2007 What burning program are you using? ok im getting pissed off i tryed this 100 times and my head unit will not read it.... i tryed extracting the files and doing it that way ect.... wtf can i do.... roxio.... Quote Link to post Share on other sites
Frans96ss Posted November 29, 2007 Report Share Posted November 29, 2007 i dont know what the hell im doing wrong but ive tried every possible way and it wont read it.... what the hell am i doing wrong? Quote Link to post Share on other sites
whtcrxghst Posted November 29, 2007 Report Share Posted November 29, 2007 You're still trying to do the bluetooth update right? i dont know what the hell im doing wrong but ive tried every possible way and it wont read it.... what the hell am i doing wrong? Quote Link to post Share on other sites
Frans96ss Posted November 29, 2007 Report Share Posted November 29, 2007 You're still trying to do the bluetooth update right? i dont know what the hell im doing wrong but ive tried every possible way and it wont read it.... what the hell am i doing wrong? yes.... Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.