has6 Posted August 9, 2007 Report Share Posted August 9, 2007 Anyone know where I can find this trim kit for my 02 Audi A4? Could it be a custom fab. perhaps? Let me know if anyone here has an idea. Thanks again. Quote Link to post Share on other sites
has6 Posted August 9, 2007 Author Report Share Posted August 9, 2007 BUMP! can anyone help me out here? Quote Link to post Share on other sites
tblazin22s Posted August 9, 2007 Report Share Posted August 9, 2007 Not Sure but you may be able to use the AU2390B. It has a pocket that you can probably remove and cut the center bar out and make it flush. Also not sure what color your dash is or what kind of finish you have but this may be a start. Quote Link to post Share on other sites
tblazin22s Posted August 9, 2007 Report Share Posted August 9, 2007 PS, made by Scosche Quote Link to post Share on other sites
Agro Posted August 9, 2007 Report Share Posted August 9, 2007 I never liked how the double-din kits for B6 A4's had to have that inside bezel. It's like 2 seperate pieces. Hrmm Quote Link to post Share on other sites
KWHITELAW Posted August 9, 2007 Report Share Posted August 9, 2007 metra makes one.99-9101 or 99-9102 cant remember but its one of those. Quote Link to post Share on other sites
has6 Posted August 10, 2007 Author Report Share Posted August 10, 2007 i'm actually looking for the bezeled look. i don't want the deck to sit flush into the kit. so far you guys have gave me the metra kit and the scosche one. is anyone out there certain of which DIN kit it is? i want to get this install done asap but i don't want to be stuck with the wrong parts. thanks again for the help guys Quote Link to post Share on other sites
KWHITELAW Posted August 10, 2007 Report Share Posted August 10, 2007 if you want the look of the first kit, get the metra. you will have to get the mounting sleeve/trim ring from pioneer tho as the new units dont ship with that. Quote Link to post Share on other sites
dummptyhummpty Posted August 13, 2007 Report Share Posted August 13, 2007 Hey what's up. I have an a4 too. Here is what you need: Metra 99-9102 Pioneer ADT-VA133 That should get you setup like the first picture. Make sure the Metra is the double din one, it will have a bar in the center that you will have to cut out. It's not the one with the pocket at the bottom. Let me know if you need anything else. Quote Link to post Share on other sites
has6 Posted August 15, 2007 Author Report Share Posted August 15, 2007 thanks guys. i'm doing the install later this week. pics coming soon! Quote Link to post Share on other sites
dummptyhummpty Posted August 15, 2007 Report Share Posted August 15, 2007 thanks guys. i'm doing the install later this week. pics coming soon! Good luck. Oh and supposedly you put the dash kit in first and then the metal cage for the Avic. I coudln't get this to work and ended up messing up my dash kit. Quote Link to post Share on other sites
Agro Posted September 10, 2007 Report Share Posted September 10, 2007 Hey what's up. I have an a4 too. Here is what you need: Metra 99-9102 Pioneer ADT-VA133 That should get you setup like the first picture. Make sure the Metra is the double din one, it will have a bar in the center that you will have to cut out. It's not the one with the pocket at the bottom. Let me know if you need anything else. Do you need the ADT-VA133 if all you need is that plastic ring so it fits in to the Metra? Quote Link to post Share on other sites
dummptyhummpty Posted September 11, 2007 Report Share Posted September 11, 2007 Hey what's up. I have an a4 too. Here is what you need: Metra 99-9102 Pioneer ADT-VA133 That should get you setup like the first picture. Make sure the Metra is the double din one, it will have a bar in the center that you will have to cut out. It's not the one with the pocket at the bottom. Let me know if you need anything else. Do you need the ADT-VA133 if all you need is that plastic ring so it fits in to the Metra? Yes you need it, it secures the Pioneer to the dash. If not it just sits in the dash opening. I drove around like that for a week, not cool. Quote Link to post Share on other sites
Agro Posted September 11, 2007 Report Share Posted September 11, 2007 Hey what's up. I have an a4 too. Here is what you need: Metra 99-9102 Pioneer ADT-VA133 That should get you setup like the first picture. Make sure the Metra is the double din one, it will have a bar in the center that you will have to cut out. It's not the one with the pocket at the bottom. Let me know if you need anything else. Do you need the ADT-VA133 if all you need is that plastic ring so it fits in to the Metra? Well I dont know exactly.... I have custom brackets for my Z1. It's secured and installed already. I have a custom face plate, which I think I want to ditch. If the Metra kit would fit perfectly around the Z1 I would be fine as I am sure I could find way to secure the bezel. But it seems I need that extra plastic piece to make it fit all flush. Yes you need it, it secures the Pioneer to the dash. If not it just sits in the dash opening. I drove around like that for a week, not cool. Quote Link to post Share on other sites
dummptyhummpty Posted September 11, 2007 Report Share Posted September 11, 2007 Hey what's up. I have an a4 too. Here is what you need: Metra 99-9102 Pioneer ADT-VA133 That should get you setup like the first picture. Make sure the Metra is the double din one, it will have a bar in the center that you will have to cut out. It's not the one with the pocket at the bottom. Let me know if you need anything else. Do you need the ADT-VA133 if all you need is that plastic ring so it fits in to the Metra? Well I dont know exactly.... I have custom brackets for my Z1. It's secured and installed already. I have a custom face plate, which I think I want to ditch. If the Metra kit would fit perfectly around the Z1 I would be fine as I am sure I could find way to secure the bezel. But it seems I need that extra plastic piece to make it fit all flush. Yes you need it, it secures the Pioneer to the dash. If not it just sits in the dash opening. I drove around like that for a week, not cool. Oh! Sorry, I thought you were the original poster. I didn't realize you had a Z3. In that case you don't need that ADT-VA133 kit, but that's the only way to get that trim piece. I guess you could call Pioneer and ask them if you can get it some how. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.