EvgaGaming Posted July 9, 2015 Report Share Posted July 9, 2015 Is this all even possible with the AVIC 8000NEX I own or will I have to upgrade to the 8100NEX to utilize this feature? Quote Link to post Share on other sites
MrEos Posted July 14, 2015 Author Report Share Posted July 14, 2015 See page 21. http://www.pioneerelectronics.com/StaticFiles/Manuals/Car/AVIC-8000NEX_OperationManual030714.pdf Quote Link to post Share on other sites
joemamma1954 Posted July 15, 2015 Report Share Posted July 15, 2015 After researching, I found that on the 8100, you can hook up a camera to a/v input, then the option of renaming the a/v input to camera, thus having camera view as an input, and can rearrange "camera input" icon. On the x000 units, this option is not in manual. That is where the difference is. Now, it is possible(on the x000 models) to put a RCA splitter on the reverse camera RCA and run 1 to reverse input and 1 to either a/v input or aux input and have camera view available as input. The reverse camera would have to be powered on by ignition switched power, and reverse signal sent to reverse signal wire on head unit for both to operate as designed. With this setup, you would have 3 available options to view camera. 1 in reverse, 2 with camera view on(in settings), 3 with a/v or aux input(which ever 1 you choose to hook up). Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.