PaisanNYC Posted July 19, 2015 Report Share Posted July 19, 2015 I don't think Pioneer really cares, because the same occurred in the original update for the 8100. In fact, Pioneer mentioned in the install instructions that 8100 users will see a folder named 5000NEX I let Pioneer know that the "AVIC-7000NEX_UC_FW-Update_v1.10_20150605.zip" updater I downloaded expands to "AVIC5000NEX"...who's watching the kids over there? Quote Link to post Share on other sites
BigCiX Posted July 24, 2015 Report Share Posted July 24, 2015 I'm having trouble upgrading. I have a 16 gb USB thumb drive that is blank and formatted to FAT32. Everyone I plug it in I get the "Make sure the only file on the disk is the update file" warning. I know the only file on here is the 1.10 upgrade. What gives? Quote Link to post Share on other sites
Pjrm68 Posted July 24, 2015 Report Share Posted July 24, 2015 I'm having trouble upgrading. I have a 16 gb USB thumb drive that is blank and formatted to FAT32. Everyone I plug it in I get the "Make sure the only file on the disk is the update file" warning. I know the only file on here is the 1.10 upgrade. What gives?Do you have the entire upgrade folder or just the one that says Avic 5000 (or something like that)? It should only be the 5000 on the thumb drive. Quote Link to post Share on other sites
BigCiX Posted July 24, 2015 Report Share Posted July 24, 2015 Yeah....I think I just screwed up big time. I thought I downloaded the 1.10 update and it was the 1.08. Now it says to contact pioneer or manufacturer. Nothing goes past that splash screen. Am I screwed? Quote Link to post Share on other sites
BigCiX Posted July 24, 2015 Report Share Posted July 24, 2015 I just got this screen Quote Link to post Share on other sites
hhm007 Posted July 24, 2015 Report Share Posted July 24, 2015 Anyone else notice that when you go to download the firmware it is now the 1.08 version instead of the 1.10? Quote Link to post Share on other sites
BigCiX Posted July 24, 2015 Report Share Posted July 24, 2015 Anyone else notice that when you go to download the firmware it is now the 1.08 version instead of the 1.10? I swore I downloaded 1.10 but when I was updating that advice is what happen. I'm at an authorized dealer right now to see if they can fix it. Quote Link to post Share on other sites
hhm007 Posted July 24, 2015 Report Share Posted July 24, 2015 I swore I downloaded 1.10 but when I was updating that advice is what happen. I'm at an authorized dealer right now to see if they can fix it. I've had a problem with updating mine too. I first downloaded the firmware yesterday (AVIC- 5000,6000,7000NEX_UC_FW-Update_v1.10), when to do the update, went from 0% to -1, then instantly failed. Now I can't get the radio out of that screen (every time I start the car it tries to update). I've tried resetting the radio with the small button at the front with no luck. I thought it might have been a firmware issue, so I went to re-dl the firmware from the site, now it only gives the 1.08 software (AVIC-5000,6000,7000NEX_UC_FW-Update_v1.08), no matter which link I try (although the site still says its the 1.10 version. Not sure what I can do now =( Quote Link to post Share on other sites
jhren Posted July 24, 2015 Report Share Posted July 24, 2015 I just tried dl (again) from 8000 link and got 1.10 (again). Quote Link to post Share on other sites
hhm007 Posted July 24, 2015 Report Share Posted July 24, 2015 I just tried dl (again) from 8000 link and got 1.10 (again). Ohh I should have mentioned that I tried the 5000-7000 links. Quote Link to post Share on other sites
BigCiX Posted July 24, 2015 Report Share Posted July 24, 2015 I'm just sending mine off Monday. They are going to put my stock radio in and send mine off. But I just might send it off from my side since I already have a return authorization number from Pioneer. So for the next month or so no back up camera or touchscreen in the Tundra. Quote Link to post Share on other sites
BigCiX Posted July 24, 2015 Report Share Posted July 24, 2015 I've had a problem with updating mine too. I first downloaded the firmware yesterday (AVIC- 5000,6000,7000NEX_UC_FW-Update_v1.10), when to do the update, went from 0% to -1, then instantly failed. Now I can't get the radio out of that screen (every time I start the car it tries to update). I've tried resetting the radio with the small button at the front with no luck. I thought it might have been a firmware issue, so I went to re-dl the firmware from the site, now it only gives the 1.08 software (AVIC-5000,6000,7000NEX_UC_FW-Update_v1.08), no matter which link I try (although the site still says its the 1.10 version. Not sure what I can do now =( Do you still have ur sd card in. Maybe it's trying to download from it still. Quote Link to post Share on other sites
hhm007 Posted July 25, 2015 Report Share Posted July 25, 2015 Do you still have ur sd card in. Maybe it's trying to download from it still. Nope I did mine with USB. I tried two different USB and both the 1.10 I downloaded yesterday and the 1.08 I downloaded today with no joy. I have an authorized pioneer repair service center about 5 mins away (so I'm lucky) and I'll bring it to them to check it out. Hopefully they won't charge me anything (unit is still under the 1yr warranty) Quote Link to post Share on other sites
BigCiX Posted July 25, 2015 Report Share Posted July 25, 2015 Nope I did mine with USB. I tried two different USB and both the 1.10 I downloaded yesterday and the 1.08 I downloaded today with no joy. I have an authorized pioneer repair service center about 5 mins away (so I'm lucky) and I'll bring it to them to check it out. Hopefully they won't charge me anything (unit is still under the 1yr warranty) Let me know what they say. I'm still under warranty too. Are u in California. I know when they are being sent I'm to be be repaired its in Long Beach. Quote Link to post Share on other sites
hhm007 Posted July 25, 2015 Report Share Posted July 25, 2015 Let me know what they say. I'm still under warranty too. Are u in California. I know when they are being sent I'm to be be repaired its in Long Beach. Nope sadly I'm in Canada, so I have a feeling it gonna be sent to the States to get repaired. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.