seti75 Posted September 20, 2015 Report Share Posted September 20, 2015 a tutorial with pictures for the various avic would be more than necessary!no wonder some avic destroy them!example some say you must change verinfo.dat else say you must change cardinfo.cifothers say that if once was used in the moin testmod, it is impossible to update because it must restore the original configuration in avic !! ?(I had testmod used for anything else on my F940BT ... which means after some of it is impossible to update the card 2015)I personally do not do anything more because it's not clear it all !!! Quote Link to post Share on other sites
kelty Posted September 20, 2015 Report Share Posted September 20, 2015 i dit the update 2015 and dit no editing on the file. but after 25 min the unit restarts and the 2015 version is working. Â thanx all Quote Link to post Share on other sites
seti75 Posted September 20, 2015 Report Share Posted September 20, 2015 My F940BT was new in 2011, I had updated with the 2013 map (in 2013) I also used the testmod (1.4)to back up files from the avic (which everyone should do before touching his avic)now I have the card in 2013 for 2 years I wanted to put the card in 2015 but too many uncertainties about what is written here!so I do nothing, I will wait quelqun spells.when the idea was that if we used testmod its avic, it is no longer possible to make the updating of the card,I do not believe it, that the testmod is to save no more (testmod 1.4)it means that all those people who made the update to the map for 2015 have not backup before?what risk they took crazy !!!  ( exemple for tesmod .... post 133 ... http://avic411.com/index.php?/topic/81488-2015-european-map-update-for-pioneer-avic-f30bt-f930bt-f9310bt-f40bt-f940bt-f840bt-f8430bt/page-9 )  ( tutorial no ok for f940bt post 138 , http://avic411.com/index.php?/topic/81488-2015-european-map-update-for-pioneer-avic-f30bt-f930bt-f9310bt-f40bt-f940bt-f840bt-f8430bt/page-10   to end !...pionara poste 200 --> http://avic411.com/index.php?/topic/81488-2015-european-map-update-for-pioneer-avic-f30bt-f930bt-f9310bt-f40bt-f940bt-f840bt-f8430bt/page-14 Quote Link to post Share on other sites
seti75 Posted September 20, 2015 Report Share Posted September 20, 2015 Some people say that you should not use testmodekey if we want to make a putting has in the daytime, ... surprising ?... ,I you advice to make a backup complete before doing odd jobs inside the avic!! I propose you my video when I made the backup of my f940bt, was very slowly to avoid the problems  not attention has my finger!! He took a blow before  http://www.wat.tv/video/files-system-backup-avicf940bt-7lzaj_4lu1r_.html Quote Link to post Share on other sites
Enu Posted September 20, 2015 Report Share Posted September 20, 2015 I can have the passw. please. Thank you so much Quote Link to post Share on other sites
Enu Posted September 20, 2015 Report Share Posted September 20, 2015 Please send me the PW for the File. THX Quote Link to post Share on other sites
Kansloos Posted September 21, 2015 Report Share Posted September 21, 2015 Hello everybody,  I've also got a F930BT. On my default startup screen i can't find a version number (except the 2011 copywright thingy) With testmod i found that my version is 3.0. Can i safely update with the version of Flomsen? of do i need to find my version number on a diffrent way.  BTW. i've copied the userfiles from the avic. Is this enough if i want to restore my system or do i need to have more files?  Thanks in advance from a dutch guy.  Kansloos  Ps. Everybody keep up the good work Quote Link to post Share on other sites
vampir13 Posted September 21, 2015 Report Share Posted September 21, 2015 Big thanks to Flomsen, Pionara, Monsterf9, Sjarrel and all others!  I updated my F30BT !!!  Quote Link to post Share on other sites
Nutty Posted September 21, 2015 Report Share Posted September 21, 2015 To those asking for the password, go back to the first post and read it thoroughly!    Flomsen, I'll sign up to DP through your link when I get a spare min   Hello everybody,  I've also got a F930BT. On my default startup screen i can't find a version number (except the 2011 copywright thingy) With testmod i found that my version is 3.0. Can i safely update with the version of Flomsen? of do i need to find my version number on a diffrent way.  BTW. i've copied the userfiles from the avic. Is this enough if i want to restore my system or do i need to have more files?  Thanks in advance from a dutch guy.  Kansloos  Ps. Everybody keep up the good work  I'd also like to know the same things (especially the backup files bit). From what I can gather the 3.0 is the firmware, rather than the map updates? So I assume we still need to do this update. But, I'm new to this so not sure! Quote Link to post Share on other sites
Sjarrel Posted September 22, 2015 Report Share Posted September 22, 2015 a tutorial with pictures for the various avic would be more than necessary! no wonder some avic destroy them! example some say you must change verinfo.dat else say you must change cardinfo.cif others say that if once was used in the moin testmod, it is impossible to update because it must restore the original configuration in avic !! ? (I had testmod used for anything else on my F940BT ... which means after some of it is impossible to update the card 2015)  I personally do not do anything more because it's not clear it all !!! Hi seti75,  There are so many guy's who updated the navigation without any problem. If you have the wrong card info then the update say's this isn't the good card. If you have the wrong verinfo.dat the navigation will ask you about the password. If you had to make an backup of your system the will never release this update in public  Quote Link to post Share on other sites
Sjarrel Posted September 22, 2015 Report Share Posted September 22, 2015 Hello everybody,  I've also got a F930BT. On my default startup screen i can't find a version number (except the 2011 copywright thingy) With testmod i found that my version is 3.0. Can i safely update with the version of Flomsen? of do i need to find my version number on a diffrent way.  BTW. i've copied the userfiles from the avic. Is this enough if i want to restore my system or do i need to have more files?  Thanks in advance from a dutch guy.  Kansloos  Ps. Everybody keep up the good work   Heb je dit topic al gelezen of ben je gelijk naar de laastste pagina gegaan? volgens mij heeft iemand versie 3.00 al vernoemd. Check het even Quote Link to post Share on other sites
seti75 Posted September 22, 2015 Report Share Posted September 22, 2015 -->Sjarrel   1) Quelqun wrote, if we once used testmodkey, Impossible to update after-use of testmodekey ? Truths or false?   ( I think that it is false).2) What is the vérinfo.dat for my f940bt ? A link ?3) Cardinfo.cif, it is necessary edit or not ?  4) what RenewallFlib.dll ? Some people say it is necessary to edit ? Yes ? No ?5) sorry , I do not want to kill my avic Quote Link to post Share on other sites
Nutty Posted September 22, 2015 Report Share Posted September 22, 2015 Hello everybody,  I've also got a F930BT. On my default startup screen i can't find a version number (except the 2011 copywright thingy) With testmod i found that my version is 3.0. Can i safely update with the version of Flomsen? of do i need to find my version number on a diffrent way.  BTW. i've copied the userfiles from the avic. Is this enough if i want to restore my system or do i need to have more files?  Thanks in advance from a dutch guy.  Kansloos  Ps. Everybody keep up the good work Me again, I can now tell you that yes you should be able to safely update with this version. I've just finished doing it and it now says version 6. Just follow the instructions linked to and you should be fine. Quote Link to post Share on other sites
osiris Posted September 22, 2015 Report Share Posted September 22, 2015 Everybody who is aking for the password should be banned for one week or so...If you are not able to read, you should not update your unit! Â just my 2ct Quote Link to post Share on other sites
seti75 Posted September 23, 2015 Report Share Posted September 23, 2015 -->Sjarrel   1) Quelqun wrote, if we once used testmodkey, Impossible to update after-use of testmodekey ? Truths or false?    ( I think that it is false).  2) What is the vérinfo.dat for my f940bt ? A link ?  3) Cardinfo.cif, it is necessary edit or not ?  4) what RenewallFlib.dll ? Some people say it is necessary to edit ? Yes ? No ?  5) sorry , I do not want to kill my avic   Me again, I can now tell you that yes you should be able to safely update with this version. I've just finished doing it and it now says version 6. Just follow the instructions linked to and you should be fine.  Questions no answer! Or then, to make you putting has in the daytime at random without understanding Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.