Nutty Posted September 23, 2015 Report Share Posted September 23, 2015 Everybody who is aking for the password should be banned for one week or so...If you are not able to read, you should not update your unit! just my 2ct This! I went through the thread thoroughly before doing anything. Even if you don't want to go through the whole thing, is it that hard to read the first post?! Questions no answer! Or then, to make you putting has in the daytime at random without understanding I'm afraid I have no idea what you were trying to say with that second sentence. As for answers, I answered Kansloos because he/she has the same version I do. I'm not going to say yes it will work on your version and then be blamed if it doesn't! I will tell you what I did with my version - f930bt and you can decide from that. 1. I would say false, as I used testmodkey to backup the user folder and was able to update afterwards with no problem. The only thing I couldn't figure out was how to get out of testmod so just turned the unit off and on again after removing the sd card. 2. I have no idea. 3. I didn't edit a thing. I downloaded the file from the first post, put it all on an sd card and into the unit. I went through this whole thread before doing anything, and it looks to me that anything that needed to be edited has now been done by someone else so that we don't have to do it. 4. See answer to 3. 5. If you follow the instructions linked to (the main bit being do not turn off the engine) I don't see why you would have a problem as long as your model is listed as working on the first post. Quote Link to post Share on other sites
seti75 Posted September 23, 2015 Report Share Posted September 23, 2015 hello Nutty you mean it takes just put the files (firmware / update /card info.cif )(first post) and start update ?why talk of Renewallflib.dll?The RenewallFLib.dll is device-specific, no ? why it is written in this forum need to edit Quote Link to post Share on other sites
Nutty Posted September 23, 2015 Report Share Posted September 23, 2015 hello Nutty you mean it takes just put the files (firmware / update /card info.cif ) (first post) and start update ? why talk of Renewallflib.dll? The RenewallFLib.dll is device-specific, no ? why it is written in this forum need to edit Hi Yes, put those three things onto the root of a blank sd card, put the card into your unit, start the engine and keep it on, the unit should say it's reading the card and then ask if you want to start the update. It took about 20 minutes for me. It restarted after reaching 100% and installed some things and asked about the language settings. It then restarted a second time and asked about the update again, so I just clicked no and ejected the sd card. I think people were talking about editing the files because a crack (or whatever the proper term is) hadn't yet been created to make it universal for all users, I assume it now has and that's why several of us haven't had to edit anything to be able to update. But, I'm still new to all this so could be wrong. If you use testmode to backup first it's not hard to do once you've worked out which button does what, there is a link here https://www.youtube.com/watch?v=ipoK6dfCp_Q that helps explain it a bit, it's a different model unit but it helped me work it out. Quote Link to post Share on other sites
AndrzejSz Posted September 23, 2015 Report Share Posted September 23, 2015 thanks to Flomsen and monsterF9AVIC F9310BT got a new life with a map in 2015. I edited the user \ PRG0 \ APL \ RenewallFlib.dll After converting a file RenewallFlib.dllUploading maps held without a problem.There was no need password. http://zapodaj.net/3e15ab4bdab07.jpg.html http://zapodaj.net/e4c5569a613e6.jpg.html http://zapodaj.net/1a668d17528ce.jpg.html http://zapodaj.net/cafa52a669941.jpg.html http://zapodaj.net/8fe38ece20c03.jpg.html Quote Link to post Share on other sites
Kansloos Posted September 23, 2015 Report Share Posted September 23, 2015 I have read the entire topic. But i wasnt sure if i got it all right. Thats why i asked for extra info regarding the version of my f930bt. Quote Link to post Share on other sites
Nutty Posted September 23, 2015 Report Share Posted September 23, 2015 I have reader the entrire topic. But i wasnt shure if i got it all right. Thats why i asked for extra info regarding the version of my f930bt. The reading post was to those that keep asking for the password, not people like you (and I, and others) that are confused with the install bit I answered you best I could as I have the same version but am new to this, hope it helped. Quote Link to post Share on other sites
osiris Posted September 24, 2015 Report Share Posted September 24, 2015 So, i think i found a problem:I can´t set any mute level in the setting. The button recognizes touching, but no function.If i get a telephone call (BT FW is 3.32) the music plays a current level and is not muted. Thats not good for me.Anybody has the same problem or an idea what to do? Greets Quote Link to post Share on other sites
osso1976 Posted September 24, 2015 Report Share Posted September 24, 2015 hello you send me the modified fileI also have a 9310btthank you Quote Link to post Share on other sites
osso1976 Posted September 24, 2015 Report Share Posted September 24, 2015 thanks to Flomsen and monsterF9 AVIC F9310BT got a new life with a map in 2015. I edited the user \ PRG0 \ APL \ RenewallFlib.dll After converting a file RenewallFlib.dll Uploading maps held without a problem. There was no need password. http://zapodaj.net/3e15ab4bdab07.jpg.html http://zapodaj.net/e4c5569a613e6.jpg.html http://zapodaj.net/1a668d17528ce.jpg.html http://zapodaj.net/cafa52a669941.jpg.html http://zapodaj.net/8fe38ece20c03.jpg.html hello you send me the modified file I also have a 9310bt thank you Quote Link to post Share on other sites
mrt71 Posted September 24, 2015 Report Share Posted September 24, 2015 Hallo zusammen, gibt es schon jemand der das Update auf dem F40BT installieren konnte?? Quote Link to post Share on other sites
seti75 Posted September 24, 2015 Report Share Posted September 24, 2015 all this wasted time!!! update succeeded for the f940bt without editing , not password!! version 5.0 --> I am in version 6.0it is simply necessary to take the 3 files of the post.1in SDcard and to make the update!!question: how to make the update of the bluthoot ? thank you has flomsen/Nutty Quote Link to post Share on other sites
mrt71 Posted September 24, 2015 Report Share Posted September 24, 2015 3 Files there is : 1. Update File 2. Voice Data File 3. ??? Quote Link to post Share on other sites
Nutty Posted September 24, 2015 Report Share Posted September 24, 2015 all this wasted time!!! update succeeded for the f940bt without editing , not password!! version 5.0 --> I am in version 6.0 it is simply necessary to take the 3 files of the post.1 in SDcard and to make the update!! question: how to make the update of the bluthoot ? thank you has flomsen/Nutty So glad it worked for you! Does your bluetooth actually need updating? Mine was already the latest version. I can't see a BT update for your model on the Pioneer site, so I'm not sure how you would do it, sorry! Quote Link to post Share on other sites
Nutty Posted September 24, 2015 Report Share Posted September 24, 2015 3 Files there is : 1. Update File 2. Voice Data File 3. ??? I didn't bother with the voice files so I'm not sure how you use those. When you download and extract the main update file, there should be a folder, then another folder inside that one that says SD drive. It's the 2 folders and 1 file in that SD drive folder, that you need to put onto your sd card. So - Firmware and Update folders, and the cardinfo file. Quote Link to post Share on other sites
AndrzejSz Posted September 24, 2015 Report Share Posted September 24, 2015 hello you send me the modified file I also have a 9310bt thank you RenewallFlib.dll is unique to that navigation. You should modify your. http://srv2.sendfile.pl/pobierz/505706---m1gh.html howto: 1. Run the AVIC "supertestmode" with a freshly formatted (FAT32) your SD card. (go to 11th place in the program there is a file manager) 2. Copy the driver using "supertestmode" RenewallFlib.dll file path USER \ PRG0 \ APL \ RenewallFlib.dll 3. Paste the RenewallFlib.dll file on the SD card. 4. Remove the SD card with AVIC and on their PC, edit the file RenewallFlib.dll as described below (the original file keep for a rainy day): a) File RenewallFlib.dll open with the help of the program HxD HexEditor ( http://hxd-hex-editor.soft32.com ) and load the file. edit the entries: in the column "Offset (h)" we are looking for the line 000019F0 and at the height of the row in the column "00" change the value to 00 so that a string of 00 50A0E3 in the column "Offset (h)" we are looking for the line 00001A10 and at the height of the row in the column "00" change the value to 00 so that a string of 00 50A0E3 in the column "Offset (h)" we are looking for the line 00001AD0 and at the height of the row in the column "08" change the value to 00 so that a string of 00 50A0E3 in the column "Offset (h)" we are looking for the line 00001C10 and at the height of the row in the column "04" change the value to 00 so that a string of 00 50A0E3 in the column "Offset (h)" we are looking for the line 00001C20 and at the height of the row in the column "04" change the value to 00 so that a string of 00 50A0E3 in the column "Offset (h)" we are looking 00001A30 line and at the height of the row in the column "0C" change the value to 00 so that a string of 00 50A0E3 c) save the file 5. Insert the SD card with the "supertestmode" and RenewallFlib.dll file back to AVIC. 6. Delete the original file RenewallFlib.dll with AVIC path USER \ PRG0 \ APL \ RenewallFlib.dll 7. Paste RenewallFlib.dll edited file from the SD card to the path USER \ PRG0 \ APL 8. Prepare freshly formatted (FAT32), SD card with map files (so that the SD card was folders FIRMWARE, UPDATE and file CARINFO.cif ) 9. Insert the SD card into the AVIC. (if you have a weak battery, start the car engine, the update takes about 25 minutes) 10. AVIC will ask you for whether to update the map, confirm. 11. Sit and wait 25 minutes. 12. After 2 reboots AVIC will be updated. 13. From the machine starts up again and again botloader asks us whether we want to update the map, of course, then we press NO and pull the SD card. Sorry for the English with a translator Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.