z2 2 wire bypass

[yamahonda_123]

Alright first off i wanted to say thanks for everyone who figured out the bypass. but to the question, i have a z2 and i wanted to do the 2 wire bypass but as i was looking at the pictures of the one posted in the sticky notes, its of the z1 and it doesnt look like mine at all and all the wires on my (which is a black connector) look like they have a place to go, as in the two lower spots have wires comming out of them. i maybe be completly in the wrong connector but im really lost any help specially with a picture would be awesome. thanks ahead.

[barfer]

here u go

http://www.sminntech.com/z1flash.html#newbypass

u need to add a wire and ground that along with the brake wire.

[whtcrxghst]

And yes. You are looking at the wrong connector. It should look exactly as the picture

[yamahonda_123]

Alright i figured it out i never had that connector connected so i dug in my box and figure it out thank you for your help!

[woodos99]

so in order to bypass my upgraded avic-z1 by cndv-700hd, i need to download the bypass files first and then 2 the 2WIRE method and that is all i need to do?

[Hyperite]

so in order to bypass my upgraded avic-z1 by cndv-700hd, i need to download the bypass files first and then 2 the 2WIRE method and that is all i need to do?

If you have the CNDV-700HD disc, you don't need to download anything.