IDT v4.2 on p46, last for 2.0 (Page 7)

Posted Mar 29, 2009 · 08:51 UTC#151

For those of you having reboot issues with the new IDT v2, it may be because of the color scheme you are using. Try changing to the Pioneer Blue schemes and then reinstalling his new data.zip.

This has been covered elsewhere. The file to solve it is here: ftp://avic:[email protected] ... idance.zip

Hope this helps!

Posted Mar 29, 2009 · 12:52 UTC#152

If I was smart enough on this stuff I'd ask "why the hell does it work like that?" But I wouldn't understand your answer. Thanks cmh! Anyone having re-boot issues with IDT V2, simply change map settings to one of Pioneers (in my case I reverted back to Pioneer Blue Day & Pioneer Red Night), then drop the new DATA.zip in the APL2/iGo folder, exit Test Mode and when you turn your key it should work.

cmh, you posted a "fix" to this issue, I downloaded the zip containing two files. Where am Ito put these two files?

SPE999

Posted Mar 29, 2009 · 13:42 UTC#153

Now that I've got this working I was just playing with it and discovered when I press the house icon, it sends me to the Destination Address input and doesn't give me a route home. Is this by design? IDT Version1 gave me a "quick route" home when I pressed the house. Overall I like V2, really like the Speed display!

SPE999

Posted Mar 29, 2009 · 14:00 UTC#154

When I choose PetterssonNight scheme my avic gives an error and is now rebooting over and over.. music is ok but when I try to go to the nav screen it does nothing. Then it reboots..
What is this? Is there a file missing? It only happens with PetterssonNight scheme..

Please, help me!

Look at the 8th post down and follow Boris' instructions. This might solve your problem, it happened to me too. http://avic411.com/forum/viewtopic.php? ... 5&start=15

please see this post i made on the 6th page regarding the color schemes. if you dont understand please click the link and read Boris' post. it has the files you need and instructions on where to place the files.

Posted Mar 29, 2009 · 14:02 UTC#155

If I was smart enough on this stuff I'd ask "why the hell does it work like that?" But I wouldn't understand your answer. Thanks cmh! Anyone having re-boot issues with IDT V2, simply change map settings to one of Pioneers (in my case I reverted back to Pioneer Blue Day & Pioneer Red Night), then drop the new DATA.zip in the APL2/iGo folder, exit Test Mode and when you turn your key it should work.

cmh, you posted a "fix" to this issue, I downloaded the zip containing two files. Where am Ito put these two files?

SPE999

Boris' instructions are 8 posts down in the link i provided

Posted Mar 29, 2009 · 15:12 UTC#156

I merged the nightguidance, elevation and speed images into the ui_pioneer\common folder in the data.zip file and all seems to be working now. Well it booted but I have not driven yet to see the graphics. I am at work and no GPS signal in the garage

I even changed the font color for the clock and date to a nice red (#990033) with the white outline, much more readable.

I would like to move the compass/clock/date down a bit. Can you tell me what to change there. I just need to move it down about the same distance as if there were some date sized text right above the compass, give or take.

The reason is the frame around the HU block about half the compass from my driver seat angle.

Also can the really cool current speed be added/displayed when a route is going?

Posted Mar 29, 2009 · 16:01 UTC#157

I merged the nightguidance, elevation and speed images into the ui_pioneer\common folder in the data.zip file and all seems to be working now. Well it booted but I have not driven yet to see the graphics. I am at work and no GPS signal in the garage

I even changed the font color for the clock and date to a nice red (#990033) with the white outline, much more readable.

I would like to move the compass/clock/date down a bit. Can you tell me what to change there. I just need to move it down about the same distance as if there were some date sized text right above the compass, give or take.

The reason is the frame around the HU block about half the compass from my driver seat angle.

Also can the really cool current speed be added/displayed when a route is going?

I tried this and, again, couldn't get it to boot up. Switched back to IDT's unmodified V2 with no problems. I think I'm having a compression issue when I try to "re-zip" the DATA.zip file. I'm using WinZip and I've tried "optimum" and "Legacy 2.0", niether seem to be liked by my 700bt.

SPE999

Posted Mar 29, 2009 · 17:10 UTC#158

I merged the nightguidance, elevation and speed images into the ui_pioneer\common folder in the data.zip file and all seems to be working now. Well it booted but I have not driven yet to see the graphics. I am at work and no GPS signal in the garage

I even changed the font color for the clock and date to a nice red (#990033) with the white outline, much more readable.

I would like to move the compass/clock/date down a bit. Can you tell me what to change there. I just need to move it down about the same distance as if there were some date sized text right above the compass, give or take.

The reason is the frame around the HU block about half the compass from my driver seat angle.

Also can the really cool current speed be added/displayed when a route is going?

I tried this and, again, couldn't get it to boot up. Switched back to IDT's unmodified V2 with no problems. I think I'm having a compression issue when I try to "re-zip" the DATA.zip file. I'm using WinZip and I've tried "optimum" and "Legacy 2.0", niether seem to be liked by my 700bt.

SPE999

use 7zip

Posted Mar 29, 2009 · 17:37 UTC#159

I merged the nightguidance, elevation and speed images into the ui_pioneer\common folder in the data.zip file and all seems to be working now. Well it booted but I have not driven yet to see the graphics. I am at work and no GPS signal in the garage

I even changed the font color for the clock and date to a nice red (#990033) with the white outline, much more readable.

I would like to move the compass/clock/date down a bit. Can you tell me what to change there. I just need to move it down about the same distance as if there were some date sized text right above the compass, give or take.

The reason is the frame around the HU block about half the compass from my driver seat angle.

Also can the really cool current speed be added/displayed when a route is going?

use 7zip

I tried this and, again, couldn't get it to boot up. Switched back to IDT's unmodified V2 with no problems. I think I'm having a compression issue when I try to "re-zip" the DATA.zip file. I'm using WinZip and I've tried "optimum" and "Legacy 2.0", niether seem to be liked by my 700bt.

SPE999

Thanks. I'll download 7zip right now and give it a shot.

SPE999

Posted Mar 29, 2009 · 18:03 UTC#160

use 7zip

I tried this and, again, couldn't get it to boot up. Switched back to IDT's unmodified V2 with no problems. I think I'm having a compression issue when I try to "re-zip" the DATA.zip file. I'm using WinZip and I've tried "optimum" and "Legacy 2.0", niether seem to be liked by my 700bt.

SPE999

Thanks. I'll download 7zip right now and give it a shot.

SPE999

one other thing, when rezipping them back, what you want to do is to sellect all the folders inside the data folder and rezipping them rather than clicking the data folder then rezipping it

Posted Mar 29, 2009 · 18:07 UTC#161

I merged the nightguidance, elevation and speed images into the ui_pioneer\common folder in the data.zip file and all seems to be working now. Well it booted but I have not driven yet to see the graphics. I am at work and no GPS signal in the garage

I even changed the font color for the clock and date to a nice red (#990033) with the white outline, much more readable.

I would like to move the compass/clock/date down a bit. Can you tell me what to change there. I just need to move it down about the same distance as if there were some date sized text right above the compass, give or take.

The reason is the frame around the HU block about half the compass from my driver seat angle.

Also can the really cool current speed be added/displayed when a route is going?

use 7zip

I tried this and, again, couldn't get it to boot up. Switched back to IDT's unmodified V2 with no problems. I think I'm having a compression issue when I try to "re-zip" the DATA.zip file. I'm using WinZip and I've tried "optimum" and "Legacy 2.0", niether seem to be liked by my 700bt.

SPE999

Thanks. I'll download 7zip right now and give it a shot.

SPE999

OK, I'm nearly a "full-up round". Loaded DATA.zip with Elevation.BMP and the Speed bmps, restored my prefered Map color schemes and it boots up fine. The only things I see are:

#1 - No Elevation displayed.

#2 - No House numbers display when I touch the street name

Am I missing something?

SPE999

Posted Mar 29, 2009 · 18:41 UTC#162

I merged the nightguidance, elevation and speed images into the ui_pioneer\common folder in the data.zip file and all seems to be working now. Well it booted but I have not driven yet to see the graphics. I am at work and no GPS signal in the garage

I even changed the font color for the clock and date to a nice red (#990033) with the white outline, much more readable.

I would like to move the compass/clock/date down a bit. Can you tell me what to change there. I just need to move it down about the same distance as if there were some date sized text right above the compass, give or take.

The reason is the frame around the HU block about half the compass from my driver seat angle.

Also can the really cool current speed be added/displayed when a route is going?

use 7zip

I tried this and, again, couldn't get it to boot up. Switched back to IDT's unmodified V2 with no problems. I think I'm having a compression issue when I try to "re-zip" the DATA.zip file. I'm using WinZip and I've tried "optimum" and "Legacy 2.0", niether seem to be liked by my 700bt.

SPE999

Thanks. I'll download 7zip right now and give it a shot.

SPE999

OK, I'm nearly a "full-up round". Loaded DATA.zip with Elevation.BMP and the Speed bmps, restored my prefered Map color schemes and it boots up fine. The only things I see are:

#1 - No Elevation displayed.

#2 - No House numbers display when I touch the street name

Am I missing something?

SPE999

could you post your navigatemap800_480.ui file

Posted Mar 29, 2009 · 18:47 UTC#163

I updated the file on the FTP with a readme in it now.

ftp://avic:[email protected] ... idance.zip

Just open the data.zip with 7zip, browse to the ui_pioneer\common folder and drag-and-drop the 2 files from the nightguidance.zip into 7-zip window. Also, drag them onto the ui_pioneer\common\night folder to be safe. Close 7-zip and reload the file onto the avic.

Posted Mar 29, 2009 · 18:49 UTC#164

Okay this is weird. When I left work after getting the boot problem fixed the unit told me there is a problem with my parking break connection etc.. That error you get if the hardware hack is not used or properly done.

Well I did the hardware hack when I installed this and never had this problem before.

Is the software hack in in the data.zip file now messing me up here??????

Posted Mar 29, 2009 · 18:54 UTC#165

Okay this is weird. When I left work after getting the boot problem fixed the unit told me there is a problem with my parking break connection etc.. That error you get if the hardware hack is not used or properly done.

Well I did the hardware hack when I installed this and never had this problem before.

Is the software hack in in the data.zip file now messing me up here??????

i don't have a software hack in the zip, better check your wiring,

Posted Mar 29, 2009 · 18:59 UTC#166

IDT's file doesn't have the software hack applied. I think your connection came loose. It would be on the wire you moved and not on the brake wire itself. FWIW, I have the software hack applied to my data.zip AND the hardware hack applied with no ill effects.

You could just go in and modify his pioneer.ini under the project_config folder to see if that fixes your problem. I used:

[pioneer]
parking_break_speed=255.0

hide_logos=1

Posted Mar 29, 2009 · 22:52 UTC#167

SPE999

OK, I'm nearly a "full-up round". Loaded DATA.zip with Elevation.BMP and the Speed bmps, restored my prefered Map color schemes and it boots up fine. The only things I see are:

#1 - No Elevation displayed.

#2 - No House numbers display when I touch the street name

Am I missing something?

SPE999

could you post your navigatemap800_480.ui file

Here it is, but trust me, its the one you wrote/moded, I've very little faith in working on code...

;*****************
;       xucheng
;*****************
;****************************************************************************************************************



; the STOPFLYOVER command also stops other kinds of simulations (i.e. saved track replay)
;

;Simulation Control Mod 








;2D 3D button	



;Cursor button	



;compass house number mod





; Voice guidance mute/Address select




;Setting button


;Delete route/ POI select



; GPS Status 
;   


;time


;Date






;house numbers display 




































;road name picture





;road name picture, searchmap









;route name and housenumber(next and the third road name)




;first corner distance








;corner picture





;road arrow























































;Auto Recalc


;HIDED FUNCTION



















;luwenyu 12.24









;display current clocked speed 





























;************percent***************

Posted Mar 29, 2009 · 23:27 UTC#168

;*****************

; xucheng

;*****************

;****************************************************************************************************************

; the STOPFLYOVER command also stops other kinds of simulations (i.e. saved track replay)

;

;Simulation Control Mod

;2D 3D button

;Cursor button

;compass house number mod

; Voice guidance mute/Address select

;Setting button

;Delete route/ POI select

; GPS Status

;

;time

;Date

;house numbers display

map.ISROUTEVALID vValidRoute vDeletableRoute

runif vValidRoute 1 sc_btnARM_Itineary_OnRelease

;road name picture

;road name picture, searchmap

;route name and housenumber(next and the third road name)

;first corner distance

;corner picture

;road arrow

;Auto Recalc

;HIDED FUNCTION

;luwenyu 12.24

;display current clocked speed

;Display Elevation

;************percent***************

the reason why the elevation is not showing up is because you don't have the code for it, my data.zip doesn't have it on default, see the code above and add the code in red to your navigate800_480.ui, as for the house number mod i am not sure why it's not showing up as the code for it is correct, try again and let me know how it goes

Posted Mar 30, 2009 · 00:00 UTC#169

the reason why the elevation is not showing up is because you don't have the code for it, my data.zip doesn't have it on default, see the code above and add the code in red to your navigate800_480.ui, as for the house number mod i am not sure why it's not showing up as the code for it is correct, try again and let me know how it goes

OK, I'll take a deep breath and give "code copying" a shot. I'll let you know how it goes.

SPE999

Posted Mar 30, 2009 · 01:51 UTC#170

Thanks for ur work ill.die ... I'm very new to this unit but everything working great...

Richard

Posted Mar 30, 2009 · 02:10 UTC#171

Is anyone experiencing lagging in 3D mode? It takes awhile to get the street name to show in when car in idle and only show the main street when the car is moving.

Posted Mar 30, 2009 · 02:14 UTC#172

Is anyone experiencing lagging in 3D mode? It takes awhile to get the street name to show in when car in idle and only show the main street when the car is moving.

haven't had that problem,

Posted Mar 30, 2009 · 02:17 UTC#173

Here are some issues I noticed tonight.

1. I lose the top buttons intermittently, specifically the tools button.

2. Fly over cuts out before reaching destination

3. There is no speed limit for the currently traveled road.

4. Intermittently lose the info in the 3 info boxes, it goes blank.

Posted Mar 30, 2009 · 02:24 UTC#174

Here are some issues I noticed tonight.

1. I lose the top buttons intermittently, specifically the tools button.

2. Fly over cuts out before reaching destination

3. There is no speed limit for the currently traveled road.

4. Intermittently lose the info in the 3 info boxes, it goes blank.

that's kinda odd, what unit do you have? anyone else having any problems?

1. i'm not sure as to why that is

2. maybe you are going too fast on simulation

3. i don't have the speed limit mod

4. still not sure as to why your losing all that?

Posted Mar 30, 2009 · 02:30 UTC#175

don't know if this could be related but are you changing the memory , the error reporting and updating the time every time your accessing testmode