schumi, nothing changed - the site where it was hosted is one of the many filesharing sites that are now blocked in US
- so posted to this thread
Oh. It's so sad... I thought, this would help against the reboots of my IGO after start the engine of my car
Anybody knows, how to fight with this trouble? May be, should install a big capacitor for the accumulator battery?
Hallo, everyone! have anybody found how to restore f320bt stucked on a bluescreen?
I`ve opened it.. here are some photos
http://ipic.su/img/i....1334388416.jpg
http://ipic.su/img/i....1334388223.jpg
And i think that this is a JTAG??
http://ipic.su/img/i....1334819935.jpg
Maybe someone found pins for Jtag?? I have a working f 320.. maybe with JTAG some people could restore their avics??
And the worst thing is that all components are BGA.. and it`s not possibile to read Nand with programmator...
Hallo Pionara! Do you have appslib.dll for Avic f320bt original version 2.0000 I`ve tryed the one you gave but it doesn`t work! Thanks!
hi serjiu, read the original post again. i did not provide appslib.dll for f320bt. there is a link to another post where another user, Somniac, posted a modified appslib.dll for f320bt. I dont know if it works or not, you will need to try that and talk to Somniac.
Can someone please point me in right direction for a working version of iGO? I've downloaded a number of different versions and none of them have worked, issues with voice files etc
Cheers
tzortst,
did you copy the files over from a mac?
if you have issues with voice/lang/etc, need to make sure there are no "junk" files like ".somefile" in the files under CONTENT igo folder
I managed to update from 310 to 320, I can see the applications on new menu but when I enter them I can see: App mode, press restart and app will work with next booting??? I've tried all lib files and no success so far. Any clues?
OK, I think I have sorted this one out.
Hi guys I have still the problem with my Pioneer avic -f3210bt Europ version. I see only a bluescreen with the standard error msg : Open OS CKS FILE FAILURE Please COld Boot and Retry
My english is unfortunatly not the best one so please help me out with this issue couse I have no idea how to fix it.
I ve made before this mistake a backup of the My flash disk and My flash disk 2.
I ve check a vew minutes ago in my car and its playing music radio mp3via usb and cd but on the screen there is only this bluescreen:/
krisvv,
Something went wrong during flashing. There is no known recovery from this problem. I caused this intentionally on one of my devices in an attempt to figure out recovery, however I could never find a way to fix. I suspect there is still some yet undiscovered recovery sequence or filename that the unit would recognize, but havent been able to find it out. It may be that jtag is the only way out, although I never bothered to find that process - only know that there are jtag headers on the board.
The head unit itself is ok, it is just the detachable faceplate (which is the computer/control/display unit on the 3xx series). You can replace the faceplate.
Could explain me what is JTAG?? Is there any possibility to connet the display via usb direct to a pc which would be able to get access to the device???
jtag is a low-level way to, among other things, reprogram the flash of an embedded-type device. If you have no experience with it, then it would not be of any use to you.
The way you can get access to this device is via activesync over usb, but that requires windows ce running on the target device, and if you have the blue screen that you describe, then wince isnt even running. Sorry.
Ive send my device to an offical pioneer service , I hope that pioneer will be able to fix it. Otherwise i was calling to pioneer support germany and they told me thats a standard bug during updates and they are able to fix it. So i will keep u all in touch.
Thx Pionara
I managed to update from 310 to 320, I can see the applications on new menu but when I enter them I can see: App mode, press restart and app will work with next booting??? I've tried all lib files and no success so far. Any clues?
OK, I think I have sorted this one out.
Hi!
How have you solved the problem?
thx
salut ..aciasi problema nici un raspuns se poate face ceva daca nu se recicleaza aparatul!!!
Hi,
Thank you Guys for so hard work on cracking the 310 unit. Great job and I improved my F310BT and made it more friendly.
Best regards
Kisiel
Hi! I have the 320BT and everything works correctly, igo included.
i set up modded applib and now i can play video with tcmp and use ttom or i go as i prefer.
just a question: igo say me gps module not found, why? is this module inside the radio or is inside the PDA?
if is inside the PDA what i have to change in order to recognize the gps hardware of my PDA320bt?
sorry for my english 
if anyone need a SD backup just tell me 
how i can create another icon for the pioneer nav menu?
i want to start tom tom and games etc
http://www.facebook.com/groups/F320BT/
i have made a group on fb for the AVIC F320BT and his hack, if someone what to join...
This proceess wok on AVIC-Z140BH ???? Pls Help.
Hi,
Did someone find the solution for rebooting back to regular stock nav mode after switching off the power? (sleep mode). It's really annoying, to run the Igo again and again by app mode and unit reboot. Do you think, it's possible to set some *.bat or *.exe file, with mortscript killing the stock nav and launching Igo just after power on? I'm to weak in programming, but looking for the opportunities or way, how to do it.
BTW, after all changes I can use Igo via app mode, but the stock nav is stucking in place, where I've launched Igo. It's frozen until the unit hard reset, but then I loose all the audio and other settings, what is another irritating bug.
Best regards
Kisiel
Hi,
I have Avic-f310bt and i updated to ver.2(thanks to Pionara).Everything work fine except stock Navi it's too slow.The solution is to remove one pole of battery for 10sec and the stock Navi works fine again.When i run Igo then stock Navi is slow again.
In the past i ran Igo (vesrion 1.0.0.4 firmware stock navi) with testmode and i has the same problem stock Navi too slow.
My conclusion is that firmware update is not the problem but something goes wrong with wince registry or gps port(Igo uses port=4
baud=57600) and the stock Navi uses different i think so
To use Mode button on unit to manage fm presents,usb songs etc when you run Igo you must press Menu on Igo and then Mode Button.
Now for Igo Primo 2 i succeeded run it with this sys.txt but the problem it is crash after 4-5 minutes and when i use simulation mode i don't know why.Sorry for my bad english.
--------------------------------------
[folders]
has_secondary_root=0
[interface]
show_exit=1
extra_settings=1
show_tmc_config=1
show_tmc_eventlist=1
show_programs=1
show_minimize=1
mapfontscale=120
laneinfo_signpost_enabled=1
show_statustext=1
shutdown_time=0
recalc_voice=0
start_navigation_time=5
max_flag_distance_3d=3000
resolution_dir="480_272"
vga=0
[rawdisplay]
class="landscape"
highres=0
screen_x=480
screen_y=272
[loading]
show_statustext=1
[power]
powermgm_state=0
[other]
demo_enabled=0
[debug]
skip_eula=1
experimental_features=1
show_battery_percent=1
hnr=1
show_hnr=1
reserve_memory=1500000
cache=262144
[naviextras]
boot_service_address="http://zippy.naviextras.com/services/index/1"
[tmc-http]
servers.size=1
servers[0].url="http://zippy.naviextras.com/services/tmclite/data/nng-igo-tmc-iphone/0/"
enabled=1
start=1
[sound]
csv_voice_enabled=1
ding_muted=1
maneuver_chimes=0
[volume_channels]
volumefade=500
[poi]
use_poi_mapping=5
use_multi_poi_mapping=0
[route]
correctness=100
guidance_at_highway_entry=1
auto_enable_permit_needed=0
guidance_at_highway_exit=1
[network]
available=1
[timezone]
patch_dst=1
sync_time=1
use_auto=1
sync_os_timezone=0
reset_os_timezone=0
[timezones]
use_timezone_setting_fix=1
use_new_timezone_ini=1
timezone_key="Time Zones"
[map]
3d_scale_carmodel=1
3dcarsizemin=9000
3dcarsizemax=15000
3dcarsizemul=80000
3d_max_tiltlevel=9000
3d_min_zoomlevel=20
poi_distant_distance=200
multi_poi_distant_distance=0
multi_poi_icon_distant_distance=0
poi_mapping=5
use_poi_mapping=5
max_poi_mapping=5
max_pois_on_horizont=5
show_pois=0
use_multi_poi_icon=0
[3d]
planned_route_contour_width=4
use_all_building_textures=1
fade_distance_for_car=0
fade_distance_for_guidance_arrow=0
fade_overlap_tolerance=0
fade_around_cursor=1
max_pois_on_horizont=5
max_poi_mapping=5
poi_mapping=5
multi_poi_distant_distance=0
multi_poi_icon_distant_distance=0
[route.histspeed]
enabled=1
show=1
use_timeslice=1
[route.histspeed.timeslice]
day=1
hour=8
minute=1
[route]
correctness=100
guidance_at_highway_entry=1
auto_enable_permit_needed=0
guidance_at_highway_exit=1
[gps]
port=4
baud=57600
protocol=NMEA
set_messages=0
[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=3
announce_street_name=1
skip_exit_numbers=0
[dynamiccompressor]
compressor=1
ratio=9
gain=9
[warning]
speedlimit_warning_visual=1
speedcam_warning=1
is_spoken=1
speedcam_max_lookahead=2000
speedcam_maxdistance_from_road=10
[speedcam_category:0]
activated_spoken_type=speech
activated_speech="Caution speed camera ahead"
approach_beep_spoken_type=0
approach_beep_speech=0
approach_beep_sound=0
overspeed_spoken_type=0
overspeed_speech=0
overspeed_sound=0
warn_distances="150:2000,140:1800,130:1500,120:1400,110:1300,100:1200,90:1100,80:1000,60:700,50:600,40:500"
[speedcam_category:1]
activated_spoken_type=speech
activated_speech="Caution mobile speed camera ahead"
approach_beep_spoken_type=0
approach_beep_speech=0
approach_beep_sound=0
overspeed_spoken_type=0
overspeed_speech=0
overspeed_sound=0
warn_distances="150:2000,140:1800,130:1500,120:1400,110:1300,100:1200,90:1100,80:1000,60:700,50:600,40:500"
[speedcam_category:2]
activated_spoken_type=speech
activated_speech="Caution traffic light camera"
approach_beep_spoken_type=0
approach_beep_speech=0
approach_beep_sound=0
overspeed_spoken_type=0
overspeed_speech=0
overspeed_sound=0
warn_distances="110:1000,90:900,60:700,50:500,40:200,20:100"
[speedcam_category:3]
activated_spoken_type=speech
activated_speech="Caution average speed camera ahead"
approach_beep_spoken_type=0
approach_beep_speech=0
approach_beep_sound=0
overspeed_spoken_type=0
overspeed_speech=0
overspeed_sound=0
warn_distances="150:2000,140:1800,130:1500,120:1400,110:1300,100:1200,90:1100,80:1000,60:700,50:600,40:500"
[speedcam_category:4]
activated_spoken_type=speech
activated_speech="Caution traffic light ahead"
approach_beep_spoken_type=0
approach_beep_speech=0
approach_beep_sound=0
overspeed_spoken_type=0
overspeed_speech=0
overspeed_sound=0
warn_distances="110:1000,90:900,60:700,20:500"
[speedcam_category:6]
activated_spoken_type=speech
activated_speech="Caution dangerous railway crossing"
approach_beep_spoken_type=0
approach_beep_speech=0
approach_beep_sound=0
overspeed_spoken_type=0
overspeed_speech=0
overspeed_sound=0
warn_distances="0:500"
[speedcam_category:7]
activated_spoken_type=speech
activated_speech="Caution bus lane camera ahead"
approach_beep_spoken_type=0
approach_beep_speech=0
approach_beep_sound=0
overspeed_spoken_type=0
overspeed_speech=0
overspeed_sound=0
warn_distances="110:1000,90:900,60:700,20:500"
[speedcam_category:8]
activated_spoken_type=speech
activated_speech="Caution dangerous crossing"
approach_beep_spoken_type=0
approach_beep_speech=0
approach_beep_sound=0
overspeed_spoken_type=0
overspeed_speech=0
overspeed_sound=0
warn_distances="0:300"
[speedcam_category:9]
activated_spoken_type=speech
activated_speech="Caution scholl zone ahead"
approach_beep_spoken_type=0
approach_beep_speech=0
approach_beep_sound=0
overspeed_spoken_type=0
overspeed_speech=0
overspeed_sound=0
warn_distances="0:500"
[speedcam_category:10]
activated_spoken_type=speech
activated_speech="Caution town entry point"
approach_beep_spoken_type=0
approach_beep_speech=0
approach_beep_sound=0
overspeed_spoken_type=0
overspeed_speech=0
overspeed_sound=0
warn_distances="0:2000"
[speedcam_category:11]
activated_spoken_type=speech
activated_speech="Intimidation radar"
approach_beep_spoken_type=0
approach_beep_speech=0
approach_beep_sound=0
overspeed_spoken_type=0
overspeed_speech=0
overspeed_sound=0
[speedcam_category:12]
activated_spoken_type=speech
activated_speech="Caution toll ahead"
approach_beep_spoken_type=0
approach_beep_speech=0
approach_beep_sound=0
overspeed_spoken_type=0
overspeed_speech=0
overspeed_sound=0
warn_distances="0:1000"
[speedcam_category:13]
activated_spoken_type=speech
activated_speech="Caution hospital"
approach_beep_spoken_type=0
approach_beep_speech=0
approach_beep_sound=0
overspeed_spoken_type=0
overspeed_speech=0
overspeed_sound=0
warn_distances="0:300"
[speedcam_category:14]
activated_spoken_type=speech
activated_speech="Caution fire Station ahead"
approach_beep_spoken_type=0
approach_beep_speech=0
approach_beep_sound=0
overspeed_spoken_type=0
overspeed_speech=0
overspeed_sound=0
[speedcam_category:15]
activated_spoken_type=speech
activated_speech="Change taxi zone"
approach_beep_spoken_type=0
approach_beep_speech=0
approach_beep_sound=0
overspeed_spoken_type=0
overspeed_speech=0
overspeed_sound=0
[speedcam_category:16]
activated_spoken_type=speech
activated_speech="Caution give way"
approach_beep_spoken_type=0
approach_beep_speech=0
approach_beep_sound=0
overspeed_spoken_type=0
overspeed_speech=0
overspeed_sound=0
warn_distances="0:200"
[speedcam_category:18]
activated_spoken_type=speech
activated_speech="Caution speed breaker"
approach_beep_spoken_type=0
approach_beep_speech=0
approach_beep_sound=0
overspeed_spoken_type=0
overspeed_speech=0
overspeed_sound=0
warn_distances="0:500"
[speedcam_category:19]
activated_spoken_type=speech
activated_speech="Caution Children ahead"
approach_beep_spoken_type=0
approach_beep_speech=0
approach_beep_sound=0
overspeed_spoken_type=0
overspeed_speech=0
overspeed_sound=0
warn_distances="0:100"
[speedcam_category:20]
activated_spoken_type=speech
activated_speech="Caution dangerous Turn"
approach_beep_spoken_type=0
approach_beep_speech=0
approach_beep_sound=0
overspeed_spoken_type=0
overspeed_speech=0
overspeed_sound=0
warn_distances="0:500"
[speedcam_category:21]
activated_spoken_type=speech
activated_speech="Caution tunnel ahead open your lights"
approach_beep_spoken_type=0
approach_beep_speech=0
approach_beep_sound=0
overspeed_spoken_type=0
overspeed_speech=0
overspeed_sound=0
warn_distances="0:500"
[speedcam_category:22]
activated_spoken_type=speech
activated_speech="POI"
approach_beep_spoken_type=0
approach_beep_speech=0
approach_beep_sound=0
overspeed_spoken_type=0
overspeed_speech=0
overspeed_sound=0
warn_distances="0:1000"
[speedcam_category:23]
activated_spoken_type=speech
activated_speech="Police department"
approach_beep_spoken_type=0
approach_beep_speech=0
approach_beep_sound=0
overspeed_spoken_type=0
overspeed_speech=0
overspeed_sound=0
[speedcam_category:31]
activated_spoken_type=speech
activated_speech="Caution dangerous point"
approach_beep_spoken_type=0
approach_beep_speech=0
approach_beep_sound=0
overspeed_spoken_type=0
overspeed_speech=0
overspeed_sound=0
warn_distances="0:500"
[camera1]
maxdistance=500
minzoom2d=50
maxzoom2d=200
defaultzoom2d=300
minzoom=25
maxzoom=60
minangle=70
maxangle=82
defaultzoom3d=45
defaultangle=80
angleoffset=65
speedzoom=1
speedangle=1
overview_enabled=1
overview_distance=500
overview_zoom3d=50
overview_angle=80
[camera11]
maxdistance=500
minzoom2d=50
maxzoom2d=300
defaultzoom2d=400
minzoom=25
maxzoom=60
minangle=70
maxangle=82
defaultzoom3d=50
defaultangle=80
angleoffset=43
speedzoom=1
speedangle=1
overview_enabled=1
overview_distance=500
overview_zoom3d=50
overview_angle=80
[vr]
disabled=0
----------------------------------
I was able to successfully install the mod, but was wondering if there was any way to revert back to stock if I ever needed to do so. I did the necessary backups, so I assume it is possible?
Are all the source files for this mod still available somewhere?
Are all the source files for this mod still available somewhere?
Sources/downloads are available on the first page from the OP.
