Posted Feb 02, 2008 · 15:51 UTC#151
Looking for VSS, speed sense, reverse wire and display dimming (night mode) wire on '08 Corvette Z06 with Bose/Nav. Thanks.
Anyone needing wire info
Posted Feb 02, 2008 · 19:23 UTC#152
zich6 said:Looking for VSS, speed sense, reverse wire and display dimming (night mode) wire on '08 Corvette Z06 with Bose/Nav. Thanks.
Going to need an interface anyway for the blose system. Might as well get one since it'll also give you all the extra crap.
Posted Feb 11, 2008 · 20:01 UTC#153
Hi I'm looking for the vss for a 2003 hyundai xg350 and also if possible the reverse lead wire. Thanks!
Posted Feb 11, 2008 · 21:17 UTC#154
VSS and Reverse for 2004 GMC Envoy. I have just ordered a D3 for my vehicle and starting to prepare for installation. Also, if anyone has advice for GPS antenna location (other than out-of-vehicle), I would appreciate help. I am thinking it may work just to position on dash?
Posted Feb 12, 2008 · 15:32 UTC#155
Hello! I was wondering if you might have the following information. I am looking for the speed pulse sensor wire for a 2002 VW Passat GLX also was wondering if you have the Antenna Amp color for this car so the radio antenna amp will power up so I can listen to the radio if ever desired.
Thanks in Advance for your help
Nick
Thanks in Advance for your help
Nick
Posted Feb 16, 2008 · 14:23 UTC#156
I am removing my Z1 from my 03 F-150 and installing it in my 07 Passat, are you familiar with installing it in this car? Any info would be a great help.
Posted Feb 19, 2008 · 04:31 UTC#157
I have a 2004 Grand Am and my preious radio had the SCV option where the volume turned up and down.... shouldn't I have a VSS wire in the harness? If so what color would it be, I'm having a hard time getting to the Wire without completely destroying the underside of my dash to get to the computer harness. Thanks!
Posted Feb 22, 2008 · 21:59 UTC#158
js117 said:I am removing my Z1 from my 03 F-150 and installing it in my 07 Passat, are you familiar with installing it in this car? Any info would be a great help.
Couldn't wait for help anymore goignto get it and all of the components installed. thanks anyway
Posted Mar 02, 2008 · 05:00 UTC#159
Hi, im a noob. i am looking for the speed sense and reverse wire for a 2000 accord....thanks
Posted May 20, 2008 · 13:41 UTC#160
Yes please, I would like to know where to connect the pink wire from a avic-d3 unit.
thanks
thanks
Posted Jun 03, 2008 · 21:12 UTC#161
I am doing some of the pre-planning for putting an F90BT in my 2008 VW Eos w/ Nav & Dynaudio. It looks like I can get VSS and reverse right off the harness. So far, I'm prety sure I will need a PAC C2R-VW, PAC SWI-CAN, and PAC SWI-PS plus a european amplified antenna adapter.
My question is, can I get preamp outs to the factory Dynaudio amp? I want to keep the Dyn system and just add subs. Since its supposed to be a 600W amp with 10 discrete channels (one for each speaker), it sounds like it might be even better than my Alpine PDX-4.150. So what kind of signal is sent from the deck to the Dyn amp? Anybody have experience with any other factory Dynaudio systems like maybe from the Passats or a Volvo?
My question is, can I get preamp outs to the factory Dynaudio amp? I want to keep the Dyn system and just add subs. Since its supposed to be a 600W amp with 10 discrete channels (one for each speaker), it sounds like it might be even better than my Alpine PDX-4.150. So what kind of signal is sent from the deck to the Dyn amp? Anybody have experience with any other factory Dynaudio systems like maybe from the Passats or a Volvo?
Posted Sep 01, 2008 · 10:38 UTC#162
Where can I find the speed sensor wires in my '98 Volvo V70?
Posted Nov 06, 2008 · 20:09 UTC#163
Can anyone tell me where the vss wire and what color for a 2009 Chevy Tahoe?
Thanks
Thanks
Posted Nov 07, 2008 · 13:17 UTC#164
'09 Tahoe? It will be a dark green with a white stripe, behind the radio.
Posted Nov 08, 2008 · 23:36 UTC#165
I’m about to replace my Avic D-2 in my 2006 GMC Envoy Denali. I had this unit put in replacing my original factory unit. Left in (to my understanding is the Bose speakers and amp. It has the XM radio unit.
The unit is connected to my stock remote steering wheel controls.
Now I am ready to install the Z2 as a replacement. The question that I have is since I already have the D-2 installed… should or would I need any other harness or wiring?
Or should the Z-2 easily install with the present harness with maybe minor modifications?
The setup in place has the GMAH24B installed. Pics avail
Is there a web link out there that talks to this specific swap out that you know of?
I hope I’m making sense….
Should I have this installed professionally?
UPDATE
Having this installed professionally....
peaked at the wiring did not do much other than look.... and now car wont start........
The unit is connected to my stock remote steering wheel controls.
Now I am ready to install the Z2 as a replacement. The question that I have is since I already have the D-2 installed… should or would I need any other harness or wiring?
Or should the Z-2 easily install with the present harness with maybe minor modifications?
The setup in place has the GMAH24B installed. Pics avail
Is there a web link out there that talks to this specific swap out that you know of?
I hope I’m making sense….
Should I have this installed professionally?
UPDATE
Having this installed professionally....
peaked at the wiring did not do much other than look.... and now car wont start........
Posted Nov 11, 2008 · 05:46 UTC#166
any idea where the vss wire is and what color?
Posted Nov 12, 2008 · 05:39 UTC#167
Well, the D2 harness will, obviously, not fit the Z2. But, the xchange should be color to color, outside of the video bypass....
Posted Nov 12, 2008 · 05:44 UTC#168
Thanks.
Your advice is appreciated!
I'm going over this now on paper it looks like I just need to plan a little more carefully.
Your advice is appreciated!
I'm going over this now on paper it looks like I just need to plan a little more carefully.
Posted Nov 13, 2008 · 16:22 UTC#169
Got it installed now. Key thing for me was patience and not be in a rush.
Posted Nov 21, 2008 · 17:18 UTC#170
Where is best place to pick up the VSS and reverse light signal for the 2005 Subaru STi. Thanks.
Posted Nov 22, 2008 · 06:00 UTC#171
VSS Wire: LOCATION 3- 3 CONNECTORS ON ECM MIDDLE CONNECTOR
VSS Wire Color: GREEN/YELLOW
VSS Pulse: 4000
VSS Tach Wire: LOCATION 16- AT COIL
Tach Signal Wire Color: RED
Reverse - Brown/Yellow at the taillights
VSS Wire Color: GREEN/YELLOW
VSS Pulse: 4000
VSS Tach Wire: LOCATION 16- AT COIL
Tach Signal Wire Color: RED
Reverse - Brown/Yellow at the taillights
Posted Nov 15, 2010 · 12:48 UTC#172
I need wiring info for an Avic F90BT going into a 2008 Honda Accord coupe I4 w/o dual zone climate control, navi. I am running 2 amps and have the power, 12v dc on off,ground and remote. I only need Orange-white (lighting), PINK (speed singnal input) Do I need purple (reverse gear input) and if so where is the optimal connection location? I also have SWI-PS PAC stearing wheel interface and need to know where to connect the white wire?
Posted Nov 17, 2010 · 01:54 UTC#173
I need vss color/location for a 2005 nissan x-trail Canada. Can not find it anywhere.
Thanks
Edited Nov 17, 2010 by serviceexpert
Posted Nov 26, 2010 · 01:29 UTC#174
need wiring info for a 1999 ford expedition???????
(parking brake, speed thing a ma jig, and a great place to put the gps!!!!!
Posted Mar 31, 2011 · 01:40 UTC#175
for a 2003 acura cl type-s. the reverse gear signal input?