ufd108

Hi, I just purchased a 2006 Volvo S60 and want to move my AVIC-Z3 to the new car. Can anyone help with the VSS and Reverse wires in this car? Thank you.

Hi all, I just purchased a 2006 Volvo S60 and want to put my AVIC-Z3 from my old car into the Volvo. Does anyone know where I can find the VSS and Reverse wires on this car? Thank you.

I am thinking of buying a used 2007 Volvo S-60 and would want to put my Z3 (upgraded Z1) in the car. Has anyone installed any type of nav in a late model S-60? Any hitches? Thank you, Don

http://www.sminntech.com/z1flash.html Scroll down to the section on 07/06 Bypass. This is for all AVIC-Z units from later model Z1s through the Z3 units.

It sounds like you connected the illumination wire to a switch rather than to your headlight circuit. This wire, if connected to the headlight switch circuit, automatically switches between day and night when your headlights are turned on or off.

Nothing to do with where you live. The software lacks many features that most other nav units have. One of the most basic features of a navigation system is to provide alternate routes. A Garmin lets you tell it not to take a road and it will route around that road. The Pioneer gives you options of 6 different alternate routes but it picks them. In the case I was referring to it proposed 6 routes but all took the non-existent bridge. Turns out there was another bridge (this one actually existed) just 4 miles north, but the Pioneer never gave me that option. Luckily I had my laptop with

The bigger question is do you want a navigation system that works or do you want the Pioneer? The beautiful Z2 navigated me right into a river yesterday. You'd think it could figure out an alternate route since the "bridge" on its maps didn't exist. But you can't tell the Pioneer to avoid a specific road. Any Garmin will do that. I had a Garmin portable before I put in the Z2 but I have to say the Pioneer navigation is pitiful compared to Garmin. If you want Pioneer so badly I'll gladly sell my Z2.

Press the trackball and a menu will open with an option to disconnect from the AVIC.

I've had a Curve since the day Cingular released it. Paired it up without an issue and have used it daily for months with no problem. I would consider performing the reset that clears out the Bluetooth pairings (I don't remember the exact procedure but do a search; it's been posted here several times) and then trying to pair it again.

The VSS hookup is not for speed per se, it's for dead reckoning. I used to have a stand-alone Garmin, which I loved, but it did not have dead reckoning. Sounds like the Kenwood doesn't either, which is kind of surprising these days. In case you're not familiar with it, dead reckoning uses a gyro and the speed input from the car to keep accurately routing even when you lose the satellite signal temporarily. My Z1, which I am seriously considering selling to get the Kenwood (I will never buy another Pioneer product after wasting money on the Z1), has that one advantage that it keeps routi

I have a Z1 and am considering selling it to get the Kenwood. I purchased a navigation system primarily for navigation. I'm a sales engineer and have to find customers in areas I don't know. As far as I'm concerned the audio in either Pioneer or Kenwood are excellent, and certainly good enough for me. But having switched from Garmin portable GPS to the Pioneer I can't believe how bad the Pioneer navigation is. To me, after the basic routing algorithms, the most important navi function is detour routing. After years of using Garmins I could not believe that Pioneer wouldn't let you detour

I can't speak to the 8703e but my 7130c has no problem transferring business cards to the Z1. Only drawback is the names go in backwards, so after a few I gave up and manually entered the important ones.

This is a legal decision by Pioneer. I read where they stated they could not control piracy if they supported MP3s on the Z1. Ripping an audio CD they can claim the owner must have had an original. They simply don't want to get sued by the RIAA.

I had a Garmin before buying a new truck with a double din opening and putting in the Z1. The Pioneer unit is nice in that it is an all-in-one unit, but the Garmin blew it out of the water in navigating. The Pioneer is feeble at best. If Kenwood ever releases the double din that you can get in Japan over here I would dump the Pioneer in a minute and get the Kenwood. Their navigation is made by Garmin.

[quote name="Wellknown-n-da-biz"]Something else to add to the list of whyners? The Z1 Blows away everything in the Navi market Bar-None.[/quote] Spoken like either someone who has never used another GPS or a Pioneer employee. I've used Garmin, Navman, and Alpine and from a pure navigation point of view the Z1 doesn't come close. [quote name="Wellknown-n-da-biz"] If the Z1 was to do everything that people whyne about it doesn't do it would cost over 5k. Would it sell then? [/quote] Actually most, if not all, the complaints people have about the Z1 are software or policy issues. Pione

Don't have a picture but it doesn't show anything more. Of the entire 7" video screen the crappy Pioneer software shows only 1 line (and not a full line, a line about 1" long) of any 1 (and only 1 at a time) piece of info, such as artist, title, channel, genre, etc.

Another entry into what is becoming a long list: "Why not to buy Pioneer navigation systems." If that integrated Kenwood system ever comes to the U.S. market I don't think Pioneer will ever sell another system...

The Pioneer manual is pretty useless although I did go through it before posting here. Does anyone know if you can type in lower case when adding contacts into the Address Book? I CAN'T STAND ALL UPPER CASE! It's even more annoying if you transfer contacts from your phone, which has them in normal mixed case, and then you have to edit something. Does anyone know how to get lower case when typing on the Z1?

Yeah but you could never load them all into the Address Book, and it would have to be manual. Most purpose-built GPS's have the ability to load customer POIs (my Garmin did). Many services sell a database of the camera locations in the correct format for the mainstream GPS's for this reason. You buy an annual subscription and they keep updating the database.

[quote name="wishbone"]Just wanted to drop a quick note here. I've been using ducatis flash circuit since the first batch (how long now DB?) and it works absolutely flawlessly every single time. I've never had it fail to bypass my unit. The unit just works as it should. I'm in total agreement that grounding two wires is easier. I just wanted to say that the circuit works in a plug and play fashion without any issues.[/quote] While I've only had my Z1 for a couple of weeks now, DB's circuit not only works every time but in my car ('06 Explorer) there is an added benefit. I left my park

[quote name="Cirbirus"]I think the navigation on the Z1 is outstanding and the sound quality of the unit is head-and-shoulders above the Alpine I replaced (I'm not sure why everyone seems to love Alpine, for me it was one of the worst radios I've ever owned).[/quote] Outstanding???! Have you ever used another GPS system? I had a Garmin 2720 before buying my new truck and installing the Z1 and the Garmin blew away the Pioneer in EVERY facet of navigation. It was faster, much more accurate, and gave much better, clearer directions. Since the voice was synthesized, not recorded, the directi

[quote name="BMWJ17"]Any input would be greatly appreciated I took the unit out and saw that the "Orange White" cable had not been hooked up by installer so I "Spliced" them together and still no dimming...... Thank you in advance for any input.[/quote] What did you splice the orange-white wire (from the Z1) to? The orange-white in an adapter harness? I can't speak for certain about the Mustang but in my '06 Explorer Ford has changed from discrete wiring to CAN bus. All major modules, including the stock audio unit, communicate via a 2-wire network. There is NO illumination wire going to

[quote name="branas"]If it were me, and I confirmed that it *was* a heat issue. I might consider cutting a little side vent behind the dash in my a/c system and route some cool air with a little hose or something towards the Z1. Be careful though, condensation could be your next enemy if not done properly. Obviously, this would not fix the problem when you first start the car, but it would reduce your wait time.[/quote] The problem with that idea would be that in winter you would be dumping hot air on the Z1. If you go this route make sure you do it in such a way that you can easily clos

Another possibility is to get a 12V fan like those used in PC's (make sure it's 12V; most PC fans are 5V these days) and mount it under the dash to push some air up around the Z1. This will be very dependant on how much room there is to get air up there. At least this way on cooler days you could put a switch in line with the fan and only power it when you need it.

Or you could remove the factory XM and place the Pioneer one right there. Then you only need a 2-1 connector adapter, which I believe is fairly cheap (trying calling XM and they might send you one for free to keep your service).