Ben NR#1

Yes this one works, thanks.

Are the 2010 Q2 still the latest European maps available for download ? These are 2010 Q4 maps but i dont know if they will work on my F700 : http://forum.mobilism.org/viewtopic.php?f=705&t=178520

Hi can someone provide me with the latest testmode version. Link in Wiki is dead and those i found on the forum do not work with my unit after the latest upgrade.

Hi, The link to testmode software is dead. Can someone please upload a new valid version ?

ey, Yeah, use these maps : http://www.filefactory.com/f/a6fc0bef967e8ddb/ and download a new ezrider. I know not all of them work, just try a few till you've got a working one. good luck with that. greetings from holland.

Hi, i think i experienced it in both modes. However it appears that the cursor is'nt always off. I noticed that on some speed ways it did went to the right location on the map. I think that when taking turns, the effect is most noticeable. sometimes about 10+ meters. I am going away this evening for a small drive to the gas station, i will try and do some test. If you know any good ones let me know .

Ok thanks, im going to try that out this afternoon. But now i also noticed another problem. My gps location show about 15 meter off from my curent lcoation. So i always see my pointer next to the road instead of on it.. anybody else experiencing this ?

Hi Ovalball, Thanks for the suggestion, that will probalby solve the issue. Your sure however that both should be set to =1 ? So then it would be : show_guidance_arrows=0 show_guidance_strip=1 I also noticed this is different from a defualt sys.txt. Diafta mod : [gps] port=7 baud=9600 default_latitude="34.05116" default_longitude="-118.24258" Original : [gps] port=7 baud=9600 default_latitude="0.0" default_longitude="0.0" You think this could solve my gps issue ? Thanks .

Hi all, I have installed the mod this afternoon and was overwelmed about all the settings i made.. So thats great . Good job to those involved in developing this. But i actually have a few question. I used to have nice green way pointers on the map, Instead of the bouncing black ones. Is there any option to change that back. Or maybe restore the whole 3D part (without the horizon) as it was a lot clearer and the map ran a lot smoother. And the highway signs now show the names next to each other instead of under. Is this normal ? Now i also have an issue with my GPS. While sta

Hello, i noticed this is a pretty old topic but i think this is your solution. viewtopic.php?f=34&t=29258 Check the end of the post : Situation: Upon Startup the "System Startup in progress please wait..." message displays and stays on. Solution: You copy and pasted over the wrong EZrider. Use the one from the link in step 3 Situtation: Upon Startup the system keeps self rebooting Solution: You may have some corrupted files from step 1. Try downloading them all again

Hi I have a question that might seem stupid, but im givin git a try anyways. Ive got my F700BT in a seat ibiza.. Now when i set my car key into accessory mode the avic starts, then when powering the engine the avic reboots. When going from running engine to acc mode, the avic shuts down. Now this has been annoying me for quite a while, so i tried all sort of things like rewiring changing cabels etc etc.. But... I noticed then when performing my FW upgrade in WIn CE mode, there was a short delay in the avic shutdown and engine poweroff. So i figured it mihgt be possible to do someth

cool, i wasn't aware of that. its just this link right ? http://www.pioneer.co.uk/uk/content/sup ... 700BT.html im going to try it out this weekend . cheers

Hi, didnt you need to purchache a license ? yust download the firmware, put it on SD and boot the device ?

Hi Klex, no, this will not work. This is an update for version 3, not an upgrade from Version 2 You could try the non-official upgrade as described in this forum cheers, Weo Hi, in fact i can confirm this DOES work.. I have an EU F700BT and upgraded it from the official pioneer 2.009 to the 3.0 on this topic. I haven't seen any weird things except for the phonebook synchronisation, which stops after it reaches the letter M. but i haven't treid deleting all user settings yet.. Good luck with your update its very simple and look great.. to me its an real improvement.

Hi, Thanks for posting this, i really enjoy the new features on my F700BT.. Upgrade went very smooth without error. BTW, are these the newest EU maps ?

Wow thanks, those are really useful links. Thanks guys, finally able to switch over to igo 8.3

I got this info from viewtopic.php?f=34&t=27803 So it navteq\navigon and teleatlas maps However, i am not able to find any maps on torrents etc. Does someone now where to get them ? Or the actual file names for Europa ?

Hi, I am in the same condition as you are, i have an f700bt and would like it to FW 3.0 but not before having compatible maps for IGO 8.3. I am from Europe also, so the posted maps in the how-to's wont work for us. I read somewhere that Teleatlas maps should work fine but i am not sure... Is there anyone who knows what maps to download ? i am sure ill be able to figure out how to install it myself. thanks.

Hi Klex, did you manage to get it working ? im from Holland and have the exact same system and firmware...

aha i know the problem now. I am running firmware 2.009 which is not supported by this testmode. Could someone please help me with the right testmode files. From what i read in earlier replys to this topic only the 0kb string that checks the firmware level should be added to get it to work...

hi Im trying to get into testmode but to no avail, the unit yust boots like normal. Also the wiki is referring to 2 folders which i can not find in the zip file. http://avic411.com/wiki/index.php/Backu ... g_software Do i need to make my SD card bootable maybe ? i have an European f700bt with firmware 2 installed

Hi would every igo 8.0 map work with the hacked easy rider ? im from europe.

Hi, Here in Holland we have safety cams that measure your average speed from point to point over a few Kilometers. But the Avic seems to recognize it as 2 separate safety cams. Is there any way around this ? So it shows a different icon or something so i know i will have to stick to the speed limit till the 2nd " special" icon appears ? Because in this case the feature isn't reliable.

hi, i need the update also, are you guys referring to the US or EU version ?.

Ok thanks, Well at least i know i am looking for the rihgt type off cable. i will try it. thanks