roro

SWDW: Are you using a user-specified layer break when burning these discs, or just leaving it at default (i.e. Calculate Optimal)? I remember there was a post last year when the 80MT discs came out suggesting a manual layer break of 2084960. At the time, I just followed the instructions and burned a successful copy in a single attempt, which is still working perfectly to this day. Please advise.

Thanks! I somehow missed those. The brushed aluminum, brushed steel, and carbon fiber ones are exactly what I was looking for. Do you think you can make a similar one with just the logo and a black background?

These would be a lot better if they were in the correct aspect ratio.

I ran a search and found only 1 background with a Nissan logo. Can anyone make a simple 500x240 background with the logo? I'm looking for 3 different background patterns if possible: black, CF, and brushed aluminum. Here is the logo for easy reference (obviously I would like that ® removed): http://www.kenneymoore.co.uk/images/clients/nissan1.jpg

[quote name="2002 Maxima SE"] [quote name="whitesmoke"]i was asked to do some for scion and was sent a nice hq logo so here you go. ...just modded my vw ones. [img]http://i172.photobucket.com/albums/w24/whitesmoke3663/TouchWinOS-blue-1600.jpg[/img] [img]http://i172.photobucket.com/albums/w24/whitesmoke3663/softshapeart.jpg[/img] [img]http://i172.photobucket.com/albums/w24/whitesmoke3663/SCION.jpg[/img] [img]http://i172.photobucket.com/albums/w24/whitesmoke3663/29381.jpg[/img] [img]http://i172.photobucket.com/albums/w24/whitesmoke3663/29019.jpg[/img] [img]http://i172.photobuck

sounds like it could be a poor ground connection

2005 Nissan Altima w/ Bose .... Crutchfield told me it was the pink wire from the radio harness.... are they wrong?

I also have a Nissan and connected the VSS wire to the pink wire from the stock Bose harness.... yet Speed Pulse in the connection status always reads 0.

Erm... my speed pulse also displays 0, and I'm pretty sure I hooked everything up correctly....

I have the same thing happening on my 05 Nissan Altima... and it doesn't appear to affect the navigation at all. The manual is even a little vague about it because it doesn't say it is necessarily wrong (which would then show "Incorrect angle"). Instead it just says "When the angle of the navigation system has changed, 'Excessive vibration' will be displayed." Although that doesn't really sound right either....

Got my D3 installed on my 05 Nissan Altima and in the connection status menu under "Back Signal" it says "Low"... and this doesn't change whether I'm in reverse or not. I connected it to the wire that Crutchfield told me to (green/white under driver's kick panel). I don't have a rear-view camera so I don't know if it's actually getting the right signal, but it says it's important for the GPS system. In the manual, it says "When the gear lever is shifted to R, the signal switches to High or Low. (Which of these is displayed depends on the vehicle.)" So did I connect it to the wrong wire

unused: pvb4y-qvcgw-z4uwh

Mine just shipped today as well!!! Does anyone know if the CDX-P620 CD changer will work? It does use an IP-BUS cable...

mine was just shipped from crutchfield