Nimbus117

If you apply the x940 update to your x930, it's then a full on Appradio device and fully controllable from the head unit, you still need to plug your phone in but you can hide it away somewhere. Seems a shame to get rid of your current unit if you haven't tried it's full potential. What apps are you interested in? most are pretty bad.

Is it possible to mirror off an iphone 4S onto a 940BT? I know earlier Pioneer units would do this if you jailbreaked the phone but not seen any mention of this on the 940. Thanks

I have used the micro SD slot since I first fitted the unit. It's very similar in operation to an ipod with the exception there is an extra level due to the folders when navigating from one album back to the index. This unit is only compatible to apple products unfortunately. Was hoping they would bring out another software update but not this year.

No, guess it was too tricky for everyone on here.

Yes, FreeNav for example lets you play music off your phone and mutes it to give directions.

Sure my 940BT shows gas stations (or whatever you select on route). I will have a look tomorrow but it's only the same logic as speed camera's and they work.

Why not try updating your unit first, this is included in the map update. The interface is much better and only takes 30 minutes off an SD card. http://www.pioneerelectronics.com/PUSA/Car/Accessories/Map-Upgrades/NAVTEQ+2012+Map+Upgrade+for+AVIC-Z110BT,+AVIC-Z120BT,+and+AVIC-X920BT You can also buy a video box that will give you iphone 5 compatibility.

Try select the audio source to off and have the handbrake on. You will be able to access the greyed out settings then.

It plugs into the 3.5mm socket on the USB cable (iphone lead).

We all know album art is displayed when you connect to your phone but is it possible to embed album art onto a SD card or USB stick so it displays the same? I have the 940BT by the way.

This was from the update I bought and sent to Radeon to update his - and everyone else by the look of it. It's only to update the 930 according to the packaging.

If you power the camera from a +12v ignition controlled source (instead of the reversing lights) and the signal to the 940 from the reverse lights, you can select reverse view any time.

The lines are generated by the camera in mine also.

I needed a fakra connector for my car, also the old head unit powered the car aerial amplifier so I got an the correct adaptor and connected it to +12v.

Parking brake needs connecting to ground, left/right positive??