mazda_3

The x920BT has absolutely nothing to do with the F series. It is the smaller version of the z120BT, same hardware, same software, smaller screen, few different features in software is all. I didnt know that but thank you for clarifying

i had the F90bt before i bought the z110. I know the X has replaced the F series b ut i would recomend to stay away from it as i did not like the f at all. It was super hack friendly which was cool BUT the boot time of 30 seconds and the laginess of the buttons was unacceptable for the price and the constant delay of the unit. I also had the d3 unit which was an older unit but it worked great only down side was you needed a cd for the maps. Wasnt a big deal just needed the 6 disc changer. I also had the N2 or 3 cant remember. That was a great unit aswell but again the cd was needed for the nav

I hate to be the bearer of bad news but manufacturers like sony, pioneer, kenwood, clarion and etc have all hit a brick wall. Consumers purchasing these units are going for the lower end models without the navigation. Reason being is people want to have a screen in their car. Most of that percentage doesnt want to spend the money on one with the nav. For example you can have a pioneer 5.8inch screen no nav (AVH-P3100DVD) for 450$ (CDN pricing) click link and then you jump in to the cheapeest pioneer nav system with a 4.3inch screen (AVIC-U310BT) for 450$ (CDN pricing) click link Then you

i love my xm and yes i mostly listen to it but i dont mind putting in the 100 or so to get it just want to know if it is worth it what does it really do do you notice a drastic difference over the normal radio? again sorry for the questions just there is not much to read about this feature

thanks for the reply, is the upgrade worth it?

I appologize if this is a stupid question but do you have to pay for a subscription to hd radio? i have satelite which i pay for which is fine and i love it but i would like to get better reception on the radio if possible

I understand your concern, On pac's website you can pic and chose for which vehicle and year. But since OP stated he was having some issues with the 2010 A3 I figured i would inform him that the information is available.

hey there, i dont know if you have seen the vehicle specific wiring chart through pac's websote but here they are check it out here also you will be needing this swi-can2 hope this information helps

i dont see why not the differences are limited. the pre out voltages are higher and thats about it if i am not mistaken

i have the bose 10.1 in my car with the 110 and the new headunit blows the stock one out of the water lol. Best part is 10.1 is still 100% functional The bypass is the easiest. The hardest part was making the custom connector so i wouldnt have to bypass my amp. Had to use the low outs on the pioneer and create a car adapter which encorporated rca's so i wouldnt blow speakers or the amp

this could get interesting

if i am not mistaken the BC goes through the cluster and as far as i know you shouldnt have an issue. Give me a couple of days and i will check to see what else is in the loop with the audio system on the e90's.

Ebay. There's a reason why I mounted the radio on the bottom: I didn't want to cut up my dash & climate controls. No. OBC works without the stock radio. But I did relocate the radio to the trunk to retain chimes and PDC. You will have to excuse me if all my questions seem to be on the ignorant side, I am really not savvy when it comes to car tech but I am looking to become educated enough for when I take it into the installer shop and for personal maintenance going forward. Can you please explain the not wanting to cut up the dash and climate control. I saw the Connect2 and Met

I installed it myself. There's nothing to bypass. I just had to relocate the stock radio to the trunk to retain chimes and PDC. OOO right that is correct my mistake the 3 series do not have a most in the radio i am thinking of the 5 series and 7 series oops lol. By putting the stock radio in the trunk i know you said you got it from ebay but everytime i look for the connectors on ebay i never find any were did you get the connectors from? Did you cut off the oem connector and extend all the wiring in to the trunk? sorry for all the questions

here is what you are looking for upgrade discs Or for a cheaper knock off version 100% the same thing just burned upgrade discs ebay version hope that helps

For the OP i would like to know if you did the instal yourself or had it done somewhere. If you did it by yourself I would like to know how you bypassed the most system in the car? PLease let me know as i am very interested to know. But hey it looks amazing and clean.

alot of manufacturers are starting to put VSS wires in to the oem headunits because of the speed sensing volume. My 2010 mazda 3 had it there from factor. My 2005 mazda 3 didnt though i had to get that from the cluster

Just a quick tip i had the same issues with the previous pioneers ive had and i was hoping theyd fixed that problem with this unit but unfortunatly my steering wheel controller had not arrived yet as i had an alpine before this Z unit. What i found with my other 2 pioneer units was if you hold up or down for like 1-2 seconds it will jump to your next preset in radio stations hold it to short it will seek hold it to long it will start to scan you have to get it JUST right lol. give that a try and see if it will work

SETTINGS, AV SETTINGS, MUTE LEVEL, set to ALL. I was actually just reading the manual thanks though i appreciate the help

Hey everyone, Being a huge pioneer fan i had 4 or 5 normal decks and 3 Double dinn units before i headed to the Z section. I started out with the N2 then the D3 then the F90bt. After owning the first 2 i listed I eagerly purchased the 90bt. Seing how long it was continuously being pushed back i figured it must be a good unit. Boy was i ever wrong It was nothing like the previous 2 units i had. I ended up getting so fed up with it and went over to the Alpine w505 with the additional blackbird 2 nav unit and later the cheaper version the nve-p1. Well that unit meh just didnt cut it but it was

does this rebate also apply for canada? I am receiving my unit in a few days and am eager to figure out On a side note is this deck better then the f900bt? That deck was super dissapointing but i did like my n2 and d3 when i had them

get a sd card or a usb card have them formatted in fat 16 or 32 create a folder called pictures and put all your pics in there. put sd or usb stick in go to the splashscreen pics import from sd/usb voila there you go

I have a ipod video and if i charge the battery via house charger it charges no problem and it holds a charge just when i plug it in to the car it does nothing. I will try getting another cable this time the real pioneer cable. When i got the unit the only thing available was the apple cables. same thing just opposed to being black it was white haha. If that doesnt work i may have to bring her in Thanks for all of the input

when it reads on the screen of the ipod "no power remains please connect power source" ipod then dies then the screen on the ipod states "please wait charging. It charges until the ipod has enough power to play about 20 seconds of a song and then it cuts out again because the battery is (pooched) drained. Before the update was applied it always charged the ipod completely and kept it charged. But still doesnt explain why my usb wont work

on a closer observation i found that the unit only charges the ipod when the battery is pooched and then stops charging. But i noticed that b4 the 2.0 update the usb always worked. could this be a problem with the software?