indiix2

Ok, so i have two questions. I've not updated to 1.06 yet (i'm still on 1.01 firmware). I have an 8000nex. Currently i have 2 iPods setup on iPod 1 and iPod2. iPod 1 is my 64GB iPod with iTunes Match and iPod2 is a 16GB iPod running my Audible software that i use to listen to my books. Right now as it stands i can start my car and no matter where i'm at in the pioneer UI my music or book or SXM or HD radio start back after the Pioneer boots up. I like this and i'm not wanting to screw this up. Every once in a blue moon the audible will start up paused, or switch to music and i have to mov

My iPhone 6 with iOS 8 does not work bluetooth wise with my 8000NEX. When i get in the car to drive down the street, they connect and then it immediately pops up a dialing box, on the screen like i'm calling someone. This cannot be hung up on and upon minimization it pops back up a few moments later and i can't really do anything with my NEX. Sometimes it says Call Waiting, sometimes it's some random number in my phone book. So either the Pioneer until cannot handle bluetooth with 6 (and 6+ i guess) or there's something buggy with how iOS8/iPhones communicate with bluetooth and they need to fi

8000. The display is awesome. I've seen it side by side to the 4000 and 5000 locally and it's a nicer looking screen with brilliant color, and very fast responsive controls.

This is more of an FYI... I have had the 8000NEX installed and working perfectly since late march when i purchased it. I bought it on the release date and received it 3 days later and immediately installed it that night. 2 weeks ago it started acting odd. It died in the middle of driving. After i arrived home i checked the main Audio fuse in my car and that was good, but i changed it just in case. I pulled the unit out and checked it's fuse and it was perfectly fine, tested with another exactly the same and still no function, then i put the original fuse back in. Put the until back into the

Apparently the answer is no. you have to manually change the EQ you have after each source change. The Z150BH said it would store the EQ setting for each source (just like the source volume sync feature), but it never worked. The 8000nex didn't even mention the ability the have custom EQ settings per source.

I've run my HDMI cable, but i hate app mode.. i just use the lightning cable for iPod mode and blutooth for calls/siri and such. I'm personally waiting for CarPlay. AppMode kinda sucks IMHO

You have to choose a different voice. The TTS (or TTY) is the one that tells you street names. The Amy voice, for example, doesn't. It tells you this in the info below the voice when you choose it.

I actually bought two of these: http://www.amazon.com/gp/product/B002MW6HRO/ref=oh_details_o04_s00_i00?ie=UTF8&psc=1 and two of these (amazing quality): http://www.amazon.com/gp/product/B00A47AWBQ/ref=oh_details_o02_s00_i00?ie=UTF8&psc=1 Then i ran the two USB extension cables through the center console of my SUV and mounted them inside the little glove box in there. Then i used the coiled lightening cables to connect to my 2 ipods/iphone and then mounted the iPods together using (fact to face since they are flat and produce no real heat) http://www.amazon.com/gp/produc

Thats for iOS 7. For iOS 8 there are hints that it will support CarPlay wirelessly. http://www.idownloadblog.com/2014/03/14/ios-8-game-center-notification-center-messages/

This is all i know of that will stay held: Nav -> Nav Menu -> Go > to Settings -> Navigation Map -> Map Display -> Viewpoint -> And you get Close, Normal and Far as your 3 options. These are the only "zoom" levels that stay once set.

None that i've seen. I'd love to have a calibration setting. Mine always shows me 2 mph slower than my normal speed. I got the same issue with my "outside temp" on my dash in my car. I'd love to be able to tweak that one as it's always 4 degrees off. Make sure you have the car speed signal cable hooked up properly.

1. I have album art, full library full everything with just USB1 -> iPod via 1 long USB extension cable and 1 lightning adapter. So you are wrong on that. You get full functionality. 2. I'm not a huge fan of bluetooth since it drains the battery, sometimes acts randomly (like disconnecting etc..). If you use the USB it will charge your phone, less likely to have random disconnects (but not entirely so), and over BT you don't get album Art. 3. I don't use my HDMI/AV cable, but i went ahead and ran a longer HDMI cable out of my head unit and into my armrest console (where i keep my

I'm not exactly sure. I thought USB1 had to be used for the AppRadio (via HDMI/AV cable). When i had mine setup originally i had my iPhone in USB1 with HDMI/AV cable and my iPod touch in the USB2 port and that worked just fine. So if you are OK with reversing that order, then yes, that will work. But if you need to keep it in the order you have then i can't answer that one for you, maybe someone else has this setup.

Yup. I tested my iPod2 with music (instead of Audible) and it perfectly remembered my spot.

My iPod touch on USB2 always remembers it's place. However its running the Audible app. I haven't tested it with Music. I'll do that tonight and see if it still works the same way.