ed60 Posted June 15, 2008 Report Share Posted June 15, 2008 Now that I have bypass working I have no cruise control on my 2007 Ford Edge Is there anything that can be done ? Quote Link to post Share on other sites
Jahntassa Posted June 16, 2008 Report Share Posted June 16, 2008 I have no idea how the bypass on the D3 could possibly affect the cruise control.. Quote Link to post Share on other sites
deadlyap1 Posted June 16, 2008 Report Share Posted June 16, 2008 Did you connect the green wire to the parking brake wire on your Ford and then ground it on top of that? The green wire should not be connected in any way to your Ford. Just ground it and the mute wire you re-located. If you ground the green wire and also connect it to the brake wire of the Ford, the car will always think the parking brake is applied. Quote Link to post Share on other sites
Dane186 Posted June 16, 2008 Report Share Posted June 16, 2008 The bypass didnt do anything to your cruise control, you did. Quote Link to post Share on other sites
HiFiSi Posted June 16, 2008 Report Share Posted June 16, 2008 See if there is a fuse for the cruise control system and check if that fuse is blown. Quote Link to post Share on other sites
ed60 Posted June 17, 2008 Author Report Share Posted June 17, 2008 Yep cc hooked up the e-brake then I grounded it Disconnected it Cruise works by-pass works Go figure Quote Link to post Share on other sites
haul@ss Posted June 17, 2008 Report Share Posted June 17, 2008 wait so if I'm bypassing, i dont connect the green wire to the e brake? so do i just use the provided wire tap to ground it? Quote Link to post Share on other sites
HiFiSi Posted June 17, 2008 Report Share Posted June 17, 2008 Yes. You just ground that wire. Do not hook it up to ANYTHING except a ground point. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.