captrob Posted October 11, 2008 Report Share Posted October 11, 2008 I know this is a stupid question, but how do you reset your unit? Quote Link to post Share on other sites
kruff10 Posted October 11, 2008 Report Share Posted October 11, 2008 press the reset button Quote Link to post Share on other sites
turnkey1 Posted October 11, 2008 Report Share Posted October 11, 2008 after doing the update i do not have a map view smaller then 5 miles any help Quote Link to post Share on other sites
Plummit Posted October 11, 2008 Report Share Posted October 11, 2008 press the reset button And for clarification, it's a small hole on the face of the unit, and you can use a paper-clip or small ball-point pen to press it. regards ~Marc Quote Link to post Share on other sites
AudioKrayzy Posted October 11, 2008 Report Share Posted October 11, 2008 got my n-2 to finally work last night after i figured out that my dvd pickup lens was dirty,ran to wally world and picked up cleaning disk inserted 08 disk and still failed i ended up doing a force load in the pioneer service menu after that was completed restarted and works great (so far) Quote Link to post Share on other sites
kruff10 Posted October 11, 2008 Report Share Posted October 11, 2008 press the reset button And for clarification, it's a small hole on the face of the unit, and you can use a paper-clip or small ball-point pen to press it. regards ~Marc yea near the top left hand corner of the unit Quote Link to post Share on other sites
ccscorpion200 Posted October 12, 2008 Report Share Posted October 12, 2008 Need help, when I finish the download of the west.iso, it shows only 3.9G. What am I doing wrong? Quote Link to post Share on other sites
ReedH Posted October 12, 2008 Report Share Posted October 12, 2008 Need help, when I finish the download of the west.iso, it shows only 3.9G.What am I doing wrong? You aren't reading this topic all the way through, that's what you are doing wrong. Quote Link to post Share on other sites
06cs Posted October 12, 2008 Report Share Posted October 12, 2008 i made the mistake of downloading in vista the 4GB west file.... burned and tried to update, it updated then stopped and says please insert appropriate disc. i came back, downloaded the 8GB version and burned. once i stuck it in it updated and then went back to "please insert approriate disc" again. what can i do now? am i screwed? is there a way to downgrade to the original version? the unit(d3) doesn't respond to anything now... the OEM disc doesn't seem to help... please help Quote Link to post Share on other sites
aznboi320 Posted October 12, 2008 Report Share Posted October 12, 2008 Thank you!! Lets hope i can find my DVD+R DL's Quote Link to post Share on other sites
AudioKrayzy Posted October 12, 2008 Report Share Posted October 12, 2008 i made the mistake of downloading in vista the 4GB west file.... burned and tried to update, it updated then stopped and says please insert appropriate disc. i came back, downloaded the 8GB version and burned. once i stuck it in it updated and then went back to "please insert approriate disc" again. what can i do now? am i screwed? is there a way to downgrade to the original version? the unit(d3) doesn't respond to anything now... the OEM disc doesn't seem to help... please help if the d3 is like the n1-n3 or d1-d2 YOU CAN BACK DATE THE DISC BY GOING INTO THE PIONEER SERVICE MENU YOU DO THIS BY PRESSING RESET BUTTON AND HOLD THEN HOLD EJECT AT SAME TIME THEN RELESE REST AND RELEASE EJECT AFTER THIS IS DO IT WILL SHOW "PRESS REST'' THEN WITH UR TOGGLE PRESS UP-RIGHT-UP-RIGHT-DOWN-RIGHT-DOWN-RIGHT FIND THE OPTION THAT SAYS FOURCE PROGRAM ENTER HERE AND FOURCE THE 1ST AND 3RD OPTION WITH YOUR ORIGINAL DISC AFTER THIS IS COMPLETED GO BACK TO MAIN SERVICE SCREEN AND RESET SAVED OPTIONS I BELIEVE #6 AFTER THIS IS DONE PRESS RESET BUTTON AND LET THE UNIT RESTART THEN YOU ARE DONE! Quote Link to post Share on other sites
06cs Posted October 12, 2008 Report Share Posted October 12, 2008 but the d3 doesn't have a toggle that can go up/right it only has a volume knob and forward/reverse seek buttons.... there's supposedly a procedure to get into the service menu but it requires the remote which i don't have... any other ideas? i made the mistake of downloading in vista the 4GB west file.... burned and tried to update, it updated then stopped and says please insert appropriate disc. i came back, downloaded the 8GB version and burned. once i stuck it in it updated and then went back to "please insert approriate disc" again. what can i do now? am i screwed? is there a way to downgrade to the original version? the unit(d3) doesn't respond to anything now... the OEM disc doesn't seem to help... please help if the d3 is like the n1-n3 or d1-d2 YOU CAN BACK DATE THE DISC BY GOING INTO THE PIONEER SERVICE MENU YOU DO THIS BY PRESSING RESET BUTTON AND HOLD THEN HOLD EJECT AT SAME TIME THEN RELESE REST AND RELEASE EJECT AFTER THIS IS DO IT WILL SHOW "PRESS REST'' THEN WITH UR TOGGLE PRESS UP-RIGHT-UP-RIGHT-DOWN-RIGHT-DOWN-RIGHT FIND THE OPTION THAT SAYS FOURCE PROGRAM ENTER HERE AND FOURCE THE 1ST AND 3RD OPTION WITH YOUR ORIGINAL DISC AFTER THIS IS COMPLETED GO BACK TO MAIN SERVICE SCREEN AND RESET SAVED OPTIONS I BELIEVE #6 AFTER THIS IS DONE PRESS RESET BUTTON AND LET THE UNIT RESTART THEN YOU ARE DONE! Quote Link to post Share on other sites
autkfan Posted October 12, 2008 Report Share Posted October 12, 2008 I'm having the same problem. All my unit will do is say please insert correct disk. Can anyone help? Quote Link to post Share on other sites
Sk1nW4lk3r Posted October 12, 2008 Report Share Posted October 12, 2008 Everything works and updated! Thanks so much! ALSO! I have a DL burner. I have downloaded and used both discs. Both work perfect in my N3 and N4. If Anyone wants a copy, I can burn and mail a copy for $15 for both east and west discs SHIPPED. This is for the cost of the DVDs and for shipping, plus a couple dollars for gas to the DVD store and post office. Not looking to make any money off this, because jlong and rotun were so kind as to provide them for free, so if anyone does not have a DL burner, I can get you east and west that I know for a fact work, for $15. pm or email me at sk1n_w4lk3r AT yahoo DOT com Thanks again guys, great work. Quote Link to post Share on other sites
Plummit Posted October 12, 2008 Report Share Posted October 12, 2008 Everything works and updated! Thanks so much! ALSO! If Anyone wants a copy, I can burn and mail a copy for $15 for both east and west discs SHIPPED. FIFTEEN BUCKS??? Maybe if you paid for the program in the first place, like the people that provided it to you..... You should pass it forward, the same way you got it, IMHO. regards ~Marc Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.