SeeBee63 Posted November 28, 2010 Report Share Posted November 28, 2010 You should find what you need and more just here: http://www.4shared.com/account/dir/BAyG_X5F/pioneer-avic.html?& I was looking for this file too and went to your link, but which files are required for which device? These are the ones pulled from the four archives on 4shared.com... - SDMLC_NN746_RE_sn0006a7.img - SDMLC_NN746_RE_sn001481.img - SDMLC_NN746_EW_sn00aa0f.img - SDMLC_NN746_RE_sn00aa0f.img - SDMLC_NN746_UC_sn00aa0f.img (I'm assuming this one is for US/Canada devices) - SDMLC_NN749_EW_sn000617.img - SDMLC_NN749_RW_sn000617.img - SDMLC_NN749_UC_sn000617.img (I'm assuming this one is for US/Canada devices) I don't want to just start trying these with the shot-gun approach... I've been doing too much of that recently with very little success! Quote Link to post Share on other sites
Kempatron Posted December 2, 2010 Report Share Posted December 2, 2010 I was looking for this file too and went to your link, but which files are required for which device? These are the ones pulled from the four archives on 4shared.com... - SDMLC_NN746_RE_sn0006a7.img - SDMLC_NN746_RE_sn001481.img - SDMLC_NN746_EW_sn00aa0f.img - SDMLC_NN746_RE_sn00aa0f.img - SDMLC_NN746_UC_sn00aa0f.img (I'm assuming this one is for US/Canada devices) - SDMLC_NN749_EW_sn000617.img - SDMLC_NN749_RW_sn000617.img - SDMLC_NN749_UC_sn000617.img (I'm assuming this one is for US/Canada devices) I don't want to just start trying these with the shot-gun approach... I've been doing too much of that recently with very little success! Try this thread: http://avic411.com/index.php?/topic/25152-list-of-device-types-in-systxt/ Quote Link to post Share on other sites
SeeBee63 Posted December 3, 2010 Report Share Posted December 3, 2010 Try this thread: http://avic411.com/index.php?/topic/25152-list-of-device-types-in-systxt/ Beautiful! Thanks! Quote Link to post Share on other sites
jtalavera02 Posted January 24, 2011 Report Share Posted January 24, 2011 YOU ARE THE MAN... I CANT BELIEVE THAT I DIDNT HAVE MUSIC IN THE CAR FOR A WEEK BECAUSE OF THIS... THANK TALI! Quote Link to post Share on other sites
martinv7602 Posted January 25, 2011 Report Share Posted January 25, 2011 im tryin to figure out what to do.. my f700bt will play music from my ipod and cds, but when it boots it shows the splash screen, THEN goes black i can still change songs and what not but i cant acess the menus or anything.. my gf used my truck a few weeks ago and she said some ezrider error came up she pressed map and it worked ok.. after she got back i checked it out and its been doing the black screen ever since.. a few times i could hit menu and it would work fine.. but as of late the screen just stays black.. any ideas? Quote Link to post Share on other sites
ws6nightcat Posted March 5, 2011 Report Share Posted March 5, 2011 can anyone upload/repost the uboot update for f900bt only one of the two files are in the rar archive Quote Link to post Share on other sites
ws6nightcat Posted March 5, 2011 Report Share Posted March 5, 2011 also the only files i'm finding for the sdmlc is for the russian version. do you need to run diskrw.exe to fix format mbr issues? Quote Link to post Share on other sites
d_p Posted March 25, 2011 Report Share Posted March 25, 2011 I had the infamous loop/cycling problem and like yourself was determined to fix it myself after speaking to Pioneer Tech Support. They suggested I ship my F700-BT off to CA for 6 months and pay them $200+ so they could do a 30 minute reprogram. I was surprised by Pioneer's incompetence and uselessness. Your step-by-step instructions fixed my problem in 25 minutes and taught me a lot about how the Windows CE system works. Which I used to shut off the nagging Warning screens and ability to watch video going down the road as long as I stay under 128mph that is. Great compilation of information. Kuddos man! Quote Link to post Share on other sites
seanbushong Posted April 2, 2011 Report Share Posted April 2, 2011 Which file did you use? I have a f90bt US version IF YOU FIND OUT LET ME KNOW IM STUCK AT WHERE YOU WRITE WINCEIMAGES Quote Link to post Share on other sites
cardocter Posted September 28, 2011 Report Share Posted September 28, 2011 After ALOT of trial and error and advise on this thread and forum my f900bt is working.Still a few bugs I need help with though.I can not adjust the volume and The HU will not recognise my Ipod even thoough AV1 setting is set to I pod.This may be because I could not get a CD-IU230V cable locally so I bought a Scosche sneek peek composite AV cable.see here http://www.scosche.c...ch/product/1622 I assume this may be my Ipod concern.Has anyone used this cable with any success?As far as the files that got me this far I used the most up to date Testmode v2.3,wrote the SDMLC file,A backup file for a F90BT.( bought the unit bricked and this was the only backup I could find),and finally updated the firmware to 2.00600 from Pioneers website as well as the bluetooth V3.3 also from Pioneer.Major thanks and props to everyone for much needed info on this site.So can someone tell me how to get my volume restored? So close and I really like what I have seen with this unit so far.(being the HU I took out was an N3)Thanks in advance Quote Link to post Share on other sites
cardocter Posted September 29, 2011 Report Share Posted September 29, 2011 OK,so I got a Pioneer cable for the IPOD and the deck still doesnt recognise it and it wont charge the ipod.System says the firmware version is 2.00600,yet it will not let me update to version 2.00800.Can someone please give me some direction on what to try next?Could it be that I used a backup file for a F90BT?I dont see any posts that would indicate that the volume or ipod issue could be hardware related.Also could the parking brake bypass be related whatsoever to my symptoms?The mute wire was relocated between the two black wires on the AV harness and then connected to the parking brake wire and the to the ground wire and to chassis ground Quote Link to post Share on other sites
spankedmonkey Posted October 9, 2011 Report Share Posted October 9, 2011 Will this procedure work in my case of having a F900-BT and no password? Quote Link to post Share on other sites
capatina_mihai Posted December 12, 2011 Report Share Posted December 12, 2011 I tries to update firmware to my avic f320bt called CNSD_130FM firmupdate, i extracted winceimg.bin and winceimg.cks to the root of my sdcard (formatted in fat 32) , asked me to update an it restarted said updating image...and gave me this massage: "Open OS CKS file failure/ Please cold boot or retry".I's a wrong winceimg image? What does it mean COLD BOOT? pls help, i just want to restored my device back.Thank you Quote Link to post Share on other sites
TheFrisco Posted December 26, 2011 Report Share Posted December 26, 2011 While trying to figure something out, I had the SUPER DUMB IDEA TO PRESS FORMATMBR ... your thread got me back up and running. Though I needed to also load the Disk1 image, this helped me get on the right track with DiskRW. THANKS a lot! Quote Link to post Share on other sites
Daisy Posted January 26, 2012 Report Share Posted January 26, 2012 Thank you, thank you, thank you. Somehow something went horribly wrong with my F500BT. This thread, many days of trial and error, and a backup I found online are the reason I am up and running again. Only problem is that the backup I downloaded isn't in English. I'm going to try to combine my backup, that was somehow corrupted, with the downloaded one to see if I can get it back to English! lol At least it works again. Having no music in your car really sucks! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.