FourG Posted December 6, 2011 Report Share Posted December 6, 2011 So FourG, is there any kind of "apps mode" for other F series like f310/320/u310 with newer firmwares? No idea, I've not considered moving on from the F90BT, it will be the last Pioneer Navi I purchase after the poor software experience. My next install will probably be a dedicated carputer (I went with F90BT to try to avoid that time-sink but in the end I would have ended up with what I wanted and a much more open platform to customize if I had). Quote Link to post Share on other sites
PatrickFernandes Posted December 7, 2011 Report Share Posted December 7, 2011 Somniac Hey man, did u try use vr.exe instead Tel.exe? at my unit have a voice butom , and i belive its call the vr.exe, maybe u can change and get tet av and igo working ! how make changes in reg to free my com port after reboot ( we cant change the ce image ), and when get CE Explorer all registry inf are alredy loaded?? Quote Link to post Share on other sites
sanemdilan Posted December 8, 2011 Report Share Posted December 8, 2011 Hello If someone does get to work in F20 BT with Igo8 full extent? The instructions for the U310BT is not the same for our device. With Launcher I wanted to try, but it did not work. Or am I doing something wrong? greet Quote Link to post Share on other sites
pionara Posted December 8, 2011 Report Share Posted December 8, 2011 so i think the f20bt euro version of z120bt? is that right? If somebody can provide me with a dump of the flash, i can take a look and see if there is some similar appmode, or if it's hidden in another directory. Does this avic unit use AVIC-APPS folder on SD card? Quote Link to post Share on other sites
sanemdilan Posted December 8, 2011 Report Share Posted December 8, 2011 Hello It's true. F20BT Euro- version. No it's not on SD-Kate. in flash memory Quote Link to post Share on other sites
pionara Posted December 8, 2011 Report Share Posted December 8, 2011 so does anybody have a dump of My Flash Disk (or similar) for this unit with the apps on it? How does pioneer load any new apps on this? Is it done through avic (or navgate) feeds pc app and sd card? Quote Link to post Share on other sites
Somniac Posted December 9, 2011 Report Share Posted December 9, 2011 Somniac Hey man, did u try use vr.exe instead Tel.exe? at my unit have a voice butom , and i belive its call the vr.exe, maybe u can change and get tet av and igo working ! how make changes in reg to free my com port after reboot ( we cant change the ce image ), and when get CE Explorer all registry inf are alredy loaded?? Patrick, on the F320BT/F310BT the exe I think your refering to is called voice.exe. I haven't tried replacing it with iGO because I assumed that without it there would be no voice navigation. I'll try it this weekend (busy at the moment) and let you know. Somniac. Quote Link to post Share on other sites
Ralpharn Posted December 9, 2011 Report Share Posted December 9, 2011 so does anybody have a dump of My Flash Disk (or similar) for this unit with the apps on it? Look here Quote Link to post Share on other sites
Ralpharn Posted December 11, 2011 Report Share Posted December 11, 2011 When we replace SD card using eject button- unit reboots itself (it is normal behaviour of this unit) can someone check if it is still remembers registry changes? It appears booting faster then "cold" boot. may be it is way to "soft reset" we looking for? Quote Link to post Share on other sites
pionara Posted December 12, 2011 Report Share Posted December 12, 2011 Ralpharn, not sure if you are doing this, but you can make reg edits and soft-reset (retaining reg-edits) with mortscripts... Quote Link to post Share on other sites
PatrickFernandes Posted December 12, 2011 Report Share Posted December 12, 2011 Patrick, on the F320BT/F310BT the exe I think your refering to is called voice.exe. I haven't tried replacing it with iGO because I assumed that without it there would be no voice navigation. I'll try it this weekend (busy at the moment) and let you know. Somniac. if i remenber, the voice funcition control playback, volume skip tracks and a lot of things, and at first start after reboot the unti ask for load, i think is better of lost tel ! Quote Link to post Share on other sites
Novac Posted December 15, 2011 Report Share Posted December 15, 2011 Hi it is with big interest I read about all your hard work with enabeling the GPS port, to be able to run alternativ Navi software. I have no mod/hack skoll what so ever, but I was thinking.....would it be possible to, in hackmode, enable bluetooth and connect a bluetooth GPS ? This way you do not need the build in GPS port.. or maybe a USB GPS, so that bluetooth telephony were still possible.. This is just a thought...... Regards Novac Quote Link to post Share on other sites
F900BT Posted December 18, 2011 Report Share Posted December 18, 2011 Hi, I just bought the F930BT, anyone got it working on this unit? I followed the instructions on the first page, but after I deleted test.key, and reboot, the unit just keep rebooting itself and doesn't go any further. Quote Link to post Share on other sites
pionara Posted December 18, 2011 Report Share Posted December 18, 2011 f930bt? i think this is euro version of x930bt... Have a look in the X-series section of the forum... Quote Link to post Share on other sites
F900BT Posted December 18, 2011 Report Share Posted December 18, 2011 f930bt? i think this is euro version of x930bt... Have a look in the X-series section of the forum... Yes F930BT. OK I manage to get into hackmode now, think problem might be how my mac handle zip files? Anyway does anyone know how to execute .cab files? I am trying to run a cab file that copy asian fonts to windows http://avic411.com/index.php?showtopic=17004 This cab files works on my F900BT, but when I double click on my F930BT it does nothing. I am desperate to get chinese fonts on my system (don't know why I took the risk and bought another Avic) otherwise all my songs tags are shown square boxes. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.