enkrypt3d Posted August 5, 2012 Report Share Posted August 5, 2012 http://www.enkrypted.com/4.01.zip Hey guys instead of using 2.0 or 3.0 use this to fix your rebooting issues........ 4.01 is so much better than 2.0! this also includes the latest maps & 3d buildings... for North America. THX! Enjoy EcoCav, when booted into WinCE mode, go to start > control Panel > storage > and format the first partition. Then copy the contents from your SD card to "my flash disK" under "My device".... Quote Link to post Share on other sites
tail24 Posted August 5, 2012 Author Report Share Posted August 5, 2012 FYI going to 4.01 will not initially work for all. Many need to fix current then go. Quote Link to post Share on other sites
enkrypt3d Posted August 5, 2012 Report Share Posted August 5, 2012 FYI going to 4.01 will not initially work for all. Many need to fix current then go. I was on 2.0 when the rebooting problem happened... then I copied 3.0 over 2.0 and it worked so I went and updated winCE for 4.0 then updated to 4.0..... works great! http://www.enkrypted.com/Avic_Files.zip Here is a mirror for the torrent file that I posted for everyone to share. Hope this helps thx Quote Link to post Share on other sites
tail24 Posted August 6, 2012 Author Report Share Posted August 6, 2012 Glad all worked. Thanks for helping share Quote Link to post Share on other sites
enkrypt3d Posted August 7, 2012 Report Share Posted August 7, 2012 Glad all worked. Thanks for helping share Feel free to post my link in your original post thanks! Quote Link to post Share on other sites
iodazed Posted August 11, 2012 Report Share Posted August 11, 2012 Now i'm having the same issues it seem's like my map files are corrupt. I've gone into test mode but it wont let me delete the maps so that I could replace them with my back up. does anyone have any ideas beside taking it out of the dash and re-formatting the hard drive any help would be greatly appreciated. Quote Link to post Share on other sites
tail24 Posted August 11, 2012 Author Report Share Posted August 11, 2012 Just copy and paste it'll paste over them. Quote Link to post Share on other sites
iodazed Posted August 11, 2012 Report Share Posted August 11, 2012 I've tired it seems like there copy protected Quote Link to post Share on other sites
iodazed Posted August 11, 2012 Report Share Posted August 11, 2012 or read only they they read in different charaters and I have clue whats up with it... Quote Link to post Share on other sites
enkrypt3d Posted August 15, 2012 Report Share Posted August 15, 2012 Dude u dont have to take it out of the dash - just reinstall the OS - in WinCE - Start > Settings > control panel > storage > format partition and then copy new files (when u format u are blowing it all away including POI's maps etc and the entire OS so reload it w/ 4.01. and ur done Quote Link to post Share on other sites
bill.turner3 Posted September 6, 2012 Report Share Posted September 6, 2012 Is there any way around the error codes I keep getting while trying to load this. It will say cannot copy a certain file and give me a code 50. It has got all the way up to just a few minutes to completion and than errors out and than its done. I have tried this several tmes. Any help would be appreciated, Thanks Quote Link to post Share on other sites
tail24 Posted September 6, 2012 Author Report Share Posted September 6, 2012 Try deleting the map data already on there and clearing trash then doing it. Quote Link to post Share on other sites
taz123 Posted September 9, 2012 Report Share Posted September 9, 2012 hi, "stuck on system startup in process screen" my f900 messed up on me last night basically i was trying to update the firmware, which i downloaded and it updated correctly after the update reboot the screen stayed on 'system startup in process please wait', only think i can do is go to AV, i cant change my setting or go into maps either, after a short time the system reboots itself, i have tried resetting via the reset button, eject but still no luck. i may have downloaded a wrong firmware or something im not sure what went wrong, version before the update was 1.900000, map version 01.000800 but after the update i dont know what it is as i can't get into settings. please help me i would really appreciate it, thanks Quote Link to post Share on other sites
tail24 Posted September 10, 2012 Author Report Share Posted September 10, 2012 what country are you in? Did you attempt this fix posted on page 1? Quote Link to post Share on other sites
Sky_001 Posted September 18, 2012 Report Share Posted September 18, 2012 Please help me! My f700bt is in the restart loop. I have follow page 1 instruction and when I am overriding all the file, in the middle it gives me a error. "error copying file or folder" and the file name is "Northamerican_low.dem". My f700bt is a canada model, I don't know if that makes a different or do I need a different file? Please help and thank you. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.