just4747 Posted December 5, 2012 Report Share Posted December 5, 2012 When you updated, did you also update the bluetooth to 3.24? I forgot to do that and could never get pandora to sync with my phone. I updated the bluetooth and all is well now. Sorry I missed that you had to change the App connection type from Wired to Bluetooth in settings, but still - neither app connection will stay connected or ever show the display on the head unit. You have to mess around with the settings just to get the apps' audio to finally go through the car, and when it finally does, the disconnected bluetooth message continually stays on the screen no matter what and eventually the audio drops back to just through the phone too. Completely broken here and useless. This goes for Pandora and Aha. OP do you know why this isnt working properly at all?? I see above that two others have the same issue and I'm sure everyone else with Android as well.... Quote Link to post Share on other sites
jfuggint Posted December 7, 2012 Report Share Posted December 7, 2012 i give up.. cant get it to copy files etc.. Do the update discs you see on ebay work? Quote Link to post Share on other sites
tissuckafree Posted December 9, 2012 Report Share Posted December 9, 2012 i got my system to restart into update mode but once it did is says there was an error updating and i cant get it to load past that screen now....i cant even try to restart the update!!! What should i do Quote Link to post Share on other sites
jfuggint Posted December 12, 2012 Report Share Posted December 12, 2012 Got my update disk & I now have this, $30 wasn't bad & I can use it as many times as I'd like Quote Link to post Share on other sites
ma_ttcald Posted December 13, 2012 Report Share Posted December 13, 2012 Since I didn't have the time or effort to try and get all the right files, I ended up getting this http://www.ebay.com/itm/2012-MAPS-UPGRADE-PIONEER-AVIC-Z120BT-AVIC-X920BT-TO-AVIC-Z140BH-AVIC-X940BT-/130801952466?pt=US_Video_In_Dash_Units_w_GPS&hash=item1e746766d2. Has anyone install this and does it work? I'm kinda hesitant to try it until I find out for sure. Quote Link to post Share on other sites
jfuggint Posted December 15, 2012 Report Share Posted December 15, 2012 Since I didn't have the time or effort to try and get all the right files, I ended up getting this http://www.ebay.com/...item1e746766d2. Has anyone install this and does it work? I'm kinda hesitant to try it until I find out for sure. thats who i got mine from, works like a charm Quote Link to post Share on other sites
ma_ttcald Posted December 16, 2012 Report Share Posted December 16, 2012 ^^^cool thanks. Quote Link to post Share on other sites
Remha Posted December 17, 2012 Report Share Posted December 17, 2012 Ok I too have been doing a bit of reading on this subject. I have a Pioneer Avic-x930bt and want to gt my android working with pandora... RIAA has def limited the torrentability of files... so Pandora is going to have to be the answer for now... I want to upgrade the X930 to X940 firmware and am getting more confident in doing this as I read through the posts... Couple of questions.. I saw a member post a bunch of pictures on the update as he did it, but his first post consisted of downloading a "TORRENT" of the x940 file.... any idea where I can find this? Quote Link to post Share on other sites
Remha Posted December 17, 2012 Report Share Posted December 17, 2012 NM. I got the file... No w all I need is a formatted SD Card?? The files I got on my dl were: 2012 Upgrade.rar, Cardinfo.cif, readme.txt, and a "RENEWALFLib-auto- FOLDER" Quote Link to post Share on other sites
Remha Posted December 17, 2012 Report Share Posted December 17, 2012 Inside the RENEWAL FOlder I got another readme.txt, RenewalLFLib.dll, Scriptexec.ini and a TESTMODE.KEY file... DO I have all that I need? Quote Link to post Share on other sites
just4747 Posted December 18, 2012 Report Share Posted December 18, 2012 Sorry I missed that you had to change the App connection type from Wired to Bluetooth in settings, but still - neither app connection will stay connected or ever show the display on the head unit. You have to mess around with the settings just to get the apps' audio to finally go through the car, and when it finally does, the disconnected bluetooth message continually stays on the screen no matter what and eventually the audio drops back to just through the phone too. Completely broken here and useless. This goes for Pandora and Aha. OP do you know why this isnt working properly at all?? I see above that two others have the same issue and I'm sure everyone else with Android as well.... Anyone? Shit still isn't working... Quote Link to post Share on other sites
JustinY17 Posted December 19, 2012 Report Share Posted December 19, 2012 I just upgraded from 2.000 to 2.003, and then tried to do this upgrade, but when I enter testmode, the screen goes blank and never shows the testmode screens. Any ideas? Quote Link to post Share on other sites
tissuckafree Posted December 20, 2012 Report Share Posted December 20, 2012 i tryed to update my pioneer x930 bt to the and when my system prompted me to restart i did, but once it restarted my system said "update error" and if you take the sd card out it prompts you to put it back in to update once you do it you get the error again. Now i cant get my system to just start up it always tries to make me update and i cant get the update to work ...can you you help me out Quote Link to post Share on other sites
JustinY17 Posted December 20, 2012 Report Share Posted December 20, 2012 i tryed to update my pioneer x930 bt to the and when my system prompted me to restart i did, but once it restarted my system said "update error" and if you take the sd card out it prompts you to put it back in to update once you do it you get the error again. Now i cant get my system to just start up it always tries to make me update and i cant get the update to work ...can you you help me out I am having the same issue now as well Quote Link to post Share on other sites
tissuckafree Posted December 20, 2012 Report Share Posted December 20, 2012 bro look at this link it shows how to get out of update mode http://avic411.com/index.php?/topic/35230-2012-uscan-maps-cnsd-310fmuc-upgrade-updated-to-supereasymethod-beta/page__st__255&do=findComment&comment=258782 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.