leorphee Posted September 4, 2015 Report Share Posted September 4, 2015 I apologize because I've written so much off topic with my problems here. I made a new thread now. Please help me here further. Thank you. http://avic411.com/index.php?/topic/81548-boot-loop-when-language-selection-with-f9210bt/ Quote Link to post Share on other sites
F920bt Posted September 4, 2015 Report Share Posted September 4, 2015 Hi there,  I can confirm this works on the F30BT.  As per above, the process I followed was:  1. Run 'supertestmode' from a freshly formatted (FAT32) SD card. 2. Copy RenewallFlib.dll from USER\PRG0\APL and USER\PRG1\APL to SD root. 3. Remove SD card from AVIC and edit RenewallFlib.dll from USER\PRG0\APL and USER\PRG1\APL as per monsterF9's guidance on a PC. 4. Insert SD card with edited RenewallFlib.dll from USER\PRG0\APL and USER\PRG1\APL back into AVIC. 5. Delete RenewallFLib.dll from USER\PRG0\APL and USER\PRG1\APL on AVIC. 6. Paste edited RenewallFlib.dll from SD card into USER\PRG0\APL and USER\PRG1\APL. 7. Remove SD card format it and copy Update, FIRMWARE and CARDINFO.cif onto it. 8. Insert SD card into AVIC and turn on ignition. Follow onscree instructions where you'll be prompted to enter a password. Enter PASSWORDPASSWORD 9. Sit back and wait for 25 minutes whilst the unit updates.  I needed to edit RenewallFlib.dll from  USER\PRG1\APL.  By the way, NAVI.exe from 2013 for skip warning works fine in 2015 as well. Only remove NAVI.exe from USER\PRG0\APL in your 2015 version and copy the NAVI.exe (pionnara mod version for 2013 version).  Thanks for support.  If there any questions, feel free to tell me  BT,  Daniel  Navi.rar Quote Link to post Share on other sites
michaelrally Posted September 4, 2015 Report Share Posted September 4, 2015 Where can i find the skip warning to download?? Quote Link to post Share on other sites
kelty Posted September 4, 2015 Report Share Posted September 4, 2015 can someone send me the pasword for 2015 maps nobody is responding on the pm's i have send you can send me a pm Quote Link to post Share on other sites
F920bt Posted September 4, 2015 Report Share Posted September 4, 2015 Where can i find the skip warning to download?? I attached the NAVI.exe above you Quote Link to post Share on other sites
michaelrally Posted September 4, 2015 Report Share Posted September 4, 2015 f920bt  thnx Quote Link to post Share on other sites
bertie21 Posted September 4, 2015 Report Share Posted September 4, 2015 Hi all, Â I can confirm this works on the F9210BT. Â As per above, the process I followed was: Â 1. Run 'supertestmode' from a freshly formatted (FAT32) SD card. 2. Copy RenewallFlib.dll from USER\PRG0\APL to SD root. 3. Remove SD card from AVIC and edit RenewallFlib.dll as per monsterF9's guidance on a PC. 4. Insert SD card with edited RenewallFlib.dll back into AVIC. 5. Delete RenewallFLib.dll from USER\PRG0\APL on AVIC. 6. Paste edited RenewallFlib.dll from SD card into USER\PRG0\APL. 7. Remove SD card format it and copy Update, FIRMWARE and (modded) CARDINFO.cif onto it. 8. Insert SD card into AVIC and turn on ignition. Follow onscree instructions where you'll be prompted to enter a password. Enter PASSWORDPASSWORD 9. Sit back and wait for 25 minutes whilst the unit updates. Â If anyone needs a hand with this, please ping me. I'm by no means an expert but after some reading, understand what's needed and how to achieve it. Â Thanks to Flomsem for the SD contents and monsterF9 for putting in the work to crack the content. If you both PM me with your PayPal details, I'll send a donation to show my appreciation for your efforts. Â Cheers, Â Paul Quote Link to post Share on other sites
bertie21 Posted September 4, 2015 Report Share Posted September 4, 2015 F930BT It didn't work first go, would not accept PASSWORDPASSWORD so I also edited USER\PRG1\APL and then it worked perfectly. Thanks guys! Quote Link to post Share on other sites
CELL Posted September 4, 2015 Report Share Posted September 4, 2015 Why aren't we posting the password in this forum? Now every ask true pm and gets it... so whats the difference? Quote Link to post Share on other sites
Corvus Posted September 4, 2015 Report Share Posted September 4, 2015 If I hade the password by now I would post it, but I have the other zip. Many have to know now, and Flomsen got he's share. Quote Link to post Share on other sites
almosthero Posted September 4, 2015 Report Share Posted September 4, 2015 I can confirm this works on the F30BT I needed to edit RenewallFlib.dll from USER\PRG1\APL. By the way, NAVI.exe from 2013 for skip warning works fine in 2015 as well. Only remove NAVI.exe from USER\PRG0\APL in your 2015 version and copy the NAVI.exe (pionnara mod version for 2013 version). Thanks for support. If there any questions, feel free to tell me BT, Daniel I'm glad you made it Thanks for the direct link to navi.exe! Quote Link to post Share on other sites
CELL Posted September 4, 2015 Report Share Posted September 4, 2015  Hi there,  I can confirm this works on the F30BT.  As per above, the process I followed was:  1. Run 'supertestmode' from a freshly formatted (FAT32) SD card. 2. Copy RenewallFlib.dll from USER\PRG0\APL and USER\PRG1\APL to SD root. 3. Remove SD card from AVIC and edit RenewallFlib.dll from USER\PRG0\APL and USER\PRG1\APL as per monsterF9's guidance on a PC. 4. Insert SD card with edited RenewallFlib.dll from USER\PRG0\APL and USER\PRG1\APL back into AVIC. 5. Delete RenewallFLib.dll from USER\PRG0\APL and USER\PRG1\APL on AVIC. 6. Paste edited RenewallFlib.dll from SD card into USER\PRG0\APL and USER\PRG1\APL. 7. Remove SD card format it and copy Update, FIRMWARE and CARDINFO.cif onto it. 8. Insert SD card into AVIC and turn on ignition. Follow onscree instructions where you'll be prompted to enter a password. Enter PASSWORDPASSWORD 9. Sit back and wait for 25 minutes whilst the unit updates.  I needed to edit RenewallFlib.dll from  USER\PRG1\APL.  By the way, NAVI.exe from 2013 for skip warning works fine in 2015 as well. Only remove NAVI.exe from USER\PRG0\APL in your 2015 version and copy the NAVI.exe (pionnara mod version for 2013 version).  Thanks for support.  If there any questions, feel free to tell me  BT,  Daniel   Not working on F930bt.  Did only change on PRG0.  Any tips? Quote Link to post Share on other sites
helder89 Posted September 4, 2015 Report Share Posted September 4, 2015 Hi there, I can confirm this works on the F30BT. As per above, the process I followed was: 1. Run 'supertestmode' from a freshly formatted (FAT32) SD card. 2. Copy RenewallFlib.dll from USER\PRG0\APL and USER\PRG1\APL to SD root. 3. Remove SD card from AVIC and edit RenewallFlib.dll from USER\PRG0\APL and USER\PRG1\APL as per monsterF9's guidance on a PC. 4. Insert SD card with edited RenewallFlib.dll from USER\PRG0\APL and USER\PRG1\APL back into AVIC. 5. Delete RenewallFLib.dll from USER\PRG0\APL and USER\PRG1\APL on AVIC. 6. Paste edited RenewallFlib.dll from SD card into USER\PRG0\APL and USER\PRG1\APL. 7. Remove SD card format it and copy Update, FIRMWARE and CARDINFO.cif onto it. 8. Insert SD card into AVIC and turn on ignition. Follow onscree instructions where you'll be prompted to enter a password. Enter PASSWORDPASSWORD 9. Sit back and wait for 25 minutes whilst the unit updates. I needed to edit RenewallFlib.dll from USER\PRG1\APL. By the way, NAVI.exe from 2013 for skip warning works fine in 2015 as well. Only remove NAVI.exe from USER\PRG0\APL in your 2015 version and copy the NAVI.exe (pionnara mod version for 2013 version). Thanks for support. If there any questions, feel free to tell me BT, Daniel I will try it on F940BT tomorrow... Quote Link to post Share on other sites
osiris Posted September 4, 2015 Report Share Posted September 4, 2015 I have the password to and everybody who has more than a 3 posts excluding "Please send me the password" got the password from me as a PM.The decision not to write the password here is very simple:  It was flomsen´s upload and he decide not to post the password officialy. Since i respect his work and BUYING the update i also do not post it here.  The problem with patching the dll should be solved by the script. So everybody who can use the testmode and has the password should be able to update his unit. Quote Link to post Share on other sites
sstroehl Posted September 4, 2015 Report Share Posted September 4, 2015 Hello, i'm very confused. Everything is prepared for the update. The sd Card is correctly formated( i still used this card for the 2013 update too). The root of the card looks like  FIRMWARE Update  If i put the card in the Slot and Start the engine, the Radio normaly starts, no update question is coming? Parking break activated  Anybody can help? It's the f930bt  Sry for my bad english   Thx Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.