Jump to content
AVIC411.com

2015 European Map Update for Pioneer AVIC-F30BT, F930BT, F9310BT, F40BT, F940BT, F840BT, F8430BT


Recommended Posts

So you update the device first with 2015 map before you did this al?

No, had the 2013 maps, and did delet the existing apl dir on the device by mistake , dident have backup.

I then copied the apl dir from the new downloaded 2015 map and used it as backup, luckily it worked.

Link to post
Share on other sites
  • Replies 789
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Hi all,

 

I can confirm this works on the F9210BT.

 

As per above, the process I followed was:

 

1. Run 'supertestmode' from a freshly formatted (FAT32) SD card.

2. Copy RenewallFlib.dll from USER\PRG0\APL to SD root.

3. Remove SD card from AVIC and edit RenewallFlib.dll as per monsterF9's guidance on a PC.

4. Insert SD card with edited RenewallFlib.dll back into AVIC.

5. Delete RenewallFLib.dll from USER\PRG0\APL on AVIC.

6. Paste edited RenewallFlib.dll from SD card into USER\PRG0\APL.

7. Remove SD card format it and copy Update, FIRMWARE and (modded) CARDINFO.cif onto it.

8. Insert SD card into AVIC and turn on ignition. Follow onscree instructions where you'll be prompted to enter a password. Enter PASSWORDPASSWORD

9. Sit back and wait for 25 minutes whilst the unit updates.

 

If anyone needs a hand with this, please ping me. I'm by no means an expert but after some reading, understand what's needed and how to achieve it.

 

Thanks to Flomsem for the SD contents and monsterF9 for putting in the work to crack the content. If you both PM me with your PayPal details, I'll send a donation to show my appreciation for your efforts.

 

Cheers,

 

Paul

Link to post
Share on other sites

Hi all,

 

I can confirm this works on the F930BT.

 

As per above, the process I followed was:

 

1. Run 'supertestmode' from a freshly formatted (FAT32) SD card.

2. Copy RenewallFlib.dll from USER\PRG0\APL to SD root.

3. Remove SD card from AVIC and edit RenewallFlib.dll as per monsterF9's guidance on a PC.

4. Insert SD card with edited RenewallFlib.dll back into AVIC.

5. Delete RenewallFLib.dll from USER\PRG0\APL on AVIC.

6. Paste edited RenewallFlib.dll from SD card into USER\PRG0\APL.

7. Remove SD card format it and copy Update, FIRMWARE and (modded) CARDINFO.cif onto it.

8. Insert SD card into AVIC and turn on ignition. Follow onscree instructions where you'll be prompted to enter a password. Enter PASSWORDPASSWORD

9. Sit back and wait for 25 minutes whilst the unit updates.

 

If anyone needs a hand with this, please ping me. I'm by no means an expert but after some reading, understand what's needed and how to achieve it.

 

Thanks to Flomsem for the SD contents and monsterF9 for putting in the work to crack the content

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...



×
×
  • Create New...