Jump to content
AVIC411.com
godzilla

New Release F20BT F30BT F40Bt F920BT F930BT F840BT Etc 2017 Release

Recommended Posts

Yes!!! F930BT

 

Succesfull and even simpeler then i thought.

 

step 1: download download shortfusescript.zip and  2017 update file

step 2: unpack shortfusescript on a fat32 SD card

step 3 Run script on F930BT ( just place SD card and touch a key when asked.

Step 4: unpack 2017 update on at least 4GB sd card.

step 5: place sdcard in F930BT and restart 

step 6: choose update procedure yes. When asked use PASSWORDPASSWORD as password.

enjoy... for this F930BT type no other steps are needed. ( probably because its the original for this type and several others)

Share this post


Link to post
Share on other sites

Yes!!! F930BT

 

Succesfull and even simpeler then i thought.

 

step 1: download download shortfusescript.zip and  2017 update file

step 2: unpack shortfusescript on a fat32 SD card

step 3 Run script on F930BT ( just place SD card and touch a key when asked.

Step 4: unpack 2017 update on at least 4GB sd card.

step 5: place sdcard in F930BT and restart 

step 6: choose update procedure yes. When asked use PASSWORDPASSWORD as password.

enjoy... for this F930BT type no other steps are needed. ( probably because its the original for this type and several others)

Hey i do exactly the same but i become every time the message after pw. SD Card wrong.

What can i do i have a avic-F840bt?

The older versions 2015 works but doesnt this.

Thanks for help!

Share this post


Link to post
Share on other sites

Question.. how to change my F930BT to a F940BT after you did this update.

Any tips or howto's would be welcomed by me.

 

is it just replacing the verinfo.dat file?

And if so.. can i use the one used in 2015 update as shown on forum by sinbad or is there a newer version..

Share this post


Link to post
Share on other sites

SD card wrong is often a format problem. Use a 4GB fat32 formatted sd card.

i know i do the same 4 gb fat32 sd card. these works always for 2015 update but only after the passwordpassword question the system start new an will install but before it comes these message. I formatet it but its the same problem> its a new card.

Share this post


Link to post
Share on other sites

i know i do the same 4 gb fat32 sd card. these works always for 2015 update but only after the passwordpassword question the system start new an will install but before it comes these message. I formatet it but its the same problem> its a new card.

Extract de files from zip again with the correct password. Use single quote ' at the beginning and the end.

 

I had the same problem.

Share this post


Link to post
Share on other sites

Extract de files from zip again with the correct password. Use single quote ' at the beginning and the end.

 

I had the same problem.

If the update fails and you are stuck with "Wrong SD" message:

-boot into testmode. 

-go into file maintenance

-remove the file USER\SYSTEM\Download\StartKnd.log

 

 

THX aksneo

Share this post


Link to post
Share on other sites

Yes!!! F930BT

 

Succesfull and even simpeler then i thought.

 

step 1: download download shortfusescript.zip and  2017 update file

step 2: unpack shortfusescript on a fat32 SD card

step 3 Run script on F930BT ( just place SD card and touch a key when asked.

Step 4: unpack 2017 update on at least 4GB sd card.

step 5: place sdcard in F930BT and restart 

step 6: choose update procedure yes. When asked use PASSWORDPASSWORD as password.

enjoy... for this F930BT type no other steps are needed. ( probably because its the original for this type and several others)

 

THX

It works on my F40BT

It is very easy with the shortfusescript.zip.

http://avic411.com/index.php?/topic/83535-map-update-hack-using-shortfuse-method-z110-z140x920-x940/&do=findComment&comment=345382

Share this post


Link to post
Share on other sites

Yes!!! F930BT

 

Succesfull and even simpeler then i thought.

 

step 1: download download shortfusescript.zip and  2017 update file

step 2: unpack shortfusescript on a fat32 SD card

step 3 Run script on F930BT ( just place SD card and touch a key when asked.

Step 4: unpack 2017 update on at least 4GB sd card.

step 5: place sdcard in F930BT and restart 

step 6: choose update procedure yes. When asked use PASSWORDPASSWORD as password.

enjoy... for this F930BT type no other steps are needed. ( probably because its the original for this type and several others)

 

Greetings to everyone.

It worked for F840BT.

Good work of RonS script, all easy, many thanks to godzilla for the maps.

Sorry for my English, I used Google Translator.

Share this post


Link to post
Share on other sites
Hey guys.

 

I download the 2017 uodate zip. filet from google driver, but I can not unpack without the password. Did you send a "godzilla" password to you? Do you know the password?

Thank you vini1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×