New update from Stanislavovich. For firmware 2.x/iGO 8.0 ONLY

http://www.4shared.com/file/130180814/a ... _DATA.html

1. When route is present, output either current time or ETA. Switch by tapping time (in route only). In cruise mode -- always current time. Remembers last state.

2. Icon next to time output -- clock for current time and flag for ETA.

3. Dashboard. Displayed by tapping the current speed in navigation screen. Red section onb the speedo when over the speed limit.

4. Speed logs. Call from Dashboard-"Speed Logs". Logs speed when it changes by 1 Km/h, Stores date, time and speed. Stores 400 values (about 5 minutes in city driving. When current log fills up it is stored as Previous log" (accessible through "Prev Log") and zeroed. Thus you have speed log for last 5-10 minutes which should be enough for disputing tickets. Current log can be cleared- "Clear log", you can add current speed- "Add", and stored to save\userlists\speed_log_saved - "Save Log". Current and previous speed logs are in the same location: speed_log and speed_log_last. Copy to a card and use as evidence.

5. Trip Computer. Called from the same location.Button to choose which ?? to use.

New update from Stanislavovich. For firmware 2.x/iGO 8.0 ONLY

http://www.4shared.com/file/130180814/a ... _DATA.html

 

1. When route is present, output either current time or ETA. Switch by tapping time (in route only). In cruise mode -- always current time. Remembers last state.

2. Icon next to time output -- clock for current time and flag for ETA.

3. Dashboard. Displayed by tapping the current speed in navigation screen. Red section onb the speedo when over the speed limit.

4. Speed logs. Call from Dashboard-"Speed Logs". Logs speed when it changes by 1 Km/h, Stores date, time and speed. Stores 400 values (about 5 minutes in city driving. When current log fills up it is stored as Previous log" (accessible through "Prev Log") and zeroed. Thus you have speed log for last 5-10 minutes which should be enough for disputing tickets. Current log can be cleared- "Clear log", you can add current speed- "Add", and stored to save\userlists\speed_log_saved - "Save Log". Current and previous speed logs are in the same location: speed_log and speed_log_last. Copy to a card and use as evidence.

5. Trip Computer. Called from the same location.Button to choose which ?? to use.

is he putting that in the 3.0 version

The first version only reboot my F500. Aug version works nice. Sept version reboots again.... What is the problem?

is he putting that in the 3.0 version

Update for Firmware 3.x/iGO 8.3 by andr2000

13. Map autotilt when road shields appear

14. Next Road name not covered by shields

15. Fixed autotilt adjustments

16. Added new features from Stanislavovich's latest version

17. Lane arrows can be displayed together with shields.

Same link: http://www.4shared.com/file/129128249/7 ... /data.html

if i throw this on the EMU is it SUPPOSE to load?

if i throw this on the EMU is it SUPPOSE to load?

Loads for me...

works =)

very cool.... no speed limit signs eh? or is not showing due to no GPS

Hello,

I just tried this mod (on 3.0, version , great stuff, very customizable, easy and clear!

But as I'm in europe, I really need TMC. I don't see any button anywhere to control it. Is it implemented?? From what I've read here, I understand it should be, but I'm not sure...

I also think that directions indications should stay on left of the screen, and speed infos should be on right side, so I suggest to move speed info to top right and left distance at the place of actual speed. It will be great also to have choice between "time left to distance" and "time at distance" .

Just suggestions.

Most embarrassing is the position of the speed alert icon, wich is overlayed by the ipod art cover (I don't care about this Art Cover, how to remove this??)

Thanks for all!

Franck

is he putting that in the 3.0 version

 

Update for Firmware 3.x/iGO 8.3 by andr2000

13. Map autotilt when road shields appear

14. Next Road name not covered by shields

15. Fixed autotilt adjustments

16. Added new features from Stanislavovich's latest version

17. Lane arrows can be displayed together with shields.

 

Same link: http://www.4shared.com/file/129128249/7 ... /data.html

Hi Boris:

I love the new mod. One problem that comes up is when I hit the speed number while in route, the system reboots. If I don't hit the speed, it works fine. Is there something I am ddoing wrong?

Thanks

Jimbo

One problem that comes up is when I hit the speed number while in route, the system reboots.

you have to put digital.ttf font into APL2/iGo folder

One problem that comes up is when I hit the speed number while in route, the system reboots.

you have to put digital.ttf font into APL2/iGo folder

Can you send me digital.ttf file? I don't have this font.

Thanks

Jimbo

One problem that comes up is when I hit the speed number while in route, the system reboots.

you have to put digital.ttf font into APL2/iGo folder

 

Can you send me digital.ttf file? I don't have this font.

Thanks

Jimbo

Boris:

After screwing around, my avic fb90t when haywired. The error message I get says" Out of Memory" with error code 99902. I reinstalled firmwire upgrade 3.01 and the same message comes up when I try to use Ezrider.. Right now it just hangs at Startup./ Any ideas?

Jimbo

Can you send me digital.ttf file? I don't have this font.

Thanks

Jimbo

Attached.

After screwing around, my avic fb90t when haywired. The error message I get says" Out of Memory" with error code 99902. I reinstalled firmwire upgrade 3.01 and the same message comes up when I try to use Ezrider.. Right now it just hangs at Startup./ Any ideas?

Jimbo

Hard to say without knowing what exactly you did with it. I would try deleting everything form UserData's iGO save directory. Then reload APL2 from the X-series update that is floating around here...

Digital.rar

Can you send me digital.ttf file? I don't have this font.

Thanks

Jimbo

 

Attached.

 

After screwing around, my avic fb90t when haywired. The error message I get says" Out of Memory" with error code 99902. I reinstalled firmwire upgrade 3.01 and the same message comes up when I try to use Ezrider.. Right now it just hangs at Startup./ Any ideas?

Jimbo

 

Hard to say without knowing what exactly you did with it. I would try deleting everything form UserData's iGO save directory. Then reload APL2 from the X-series update that is floating around here...

Thanks Boris;

I have everything up and running!

Jimbo

Can somebody tell me wich code i have to use and wich ui-files to change for the alert - distance and the warning - distance for version 3.0.

I,am looking for it a long time and tried to put the code in my own data.zip but it is to complecated for me to understand all of them.

Do i only have to look in the setting_800_480.ui and speedcam_800_480.ui

Please can sombody help me.

Regards,

Navigarie.

Thanks Boris;

I have everything up and running!

Jimbo

Good!

Can somebody tell me wich code i have to use and wich ui-files to change for the alert - distance and the warning - distance for version 3.0.

I,am looking for it a long time and tried to put the code in my own data.zip but it is to complecated for me to understand all of them.

 

Do i only have to look in the setting_800_480.ui and speedcam_800_480.ui

 

Please can sombody help me.

 

Regards,

 

Navigarie.

Also check setting.ui and speedcam.ui in COMMON

I'm having a few issues with the 3.0 version of this mod...

First, the clock doesn't fit inside the box it sticks out by maybe 20 pixels to the right.

Second, roadsigns are present even when not navigating.

The third i'm not sure if its a problem or a setting I missed but I can't turn off the box to the left while not navigating.

Any help on these would be greatly appreciated... Other than these little issues seems to be a really great mod!

Hi,

where i can add addresses to favorite? i tried every screen but i couldn't find it.

 

Kind Regards

You can not add address to favorite, no such function in iGO

When a spud file is created, under type does it hold a name e.g. RPSPost or does it hold the spud number e.g. 14.

 

The reason I ask is I would like to change the spreadsheet so that it is more suitable to the UK.

 

Thanks for all your help.

 

Colin

spud keeps speedcam's code.

The third i'm not sure if its a problem or a setting I missed but I can't turn off the box to the left while not navigating.

The box can be removed from the screen only in "Full screen" mode (settings-visual). But only completely with all info

Thanks Boris;

I have everything up and running!

Jimbo

 

Good!

 

Can somebody tell me wich code i have to use and wich ui-files to change for the alert - distance and the warning - distance for version 3.0.

I,am looking for it a long time and tried to put the code in my own data.zip but it is to complecated for me to understand all of them.

 

Do i only have to look in the setting_800_480.ui and speedcam_800_480.ui

 

Please can sombody help me.

 

Regards,

 

Navigarie.

 

Also check setting.ui and speedcam.ui in COMMON

Thanks BorisM for your reply,

I have tried to understand the code but it is to complex for me.

Can you tell me where i can find or do you have the exact code only for warn and beep distances to put in my standard VERSION 3.0 Data.zip it would be appriciated.

simple buttons i understand but more than that it would be to difficult at the moment.

regards,

Navigarie

Second, roadsigns are present even when not navigating.

is it a bug or a feature? I'm not sure

can you pls give some cons against having it?

Hello Boris,

Thanks for supporting this mod.

Maybe I missed it in the last 25 pages, but I have 3 questions:

1. Navigation voice mute button: does it exist, or how can I temporary kill the voice?

2. TMC for Europe, I have set the testmode setting to EUR, but for some reason the TMC settings show no activity for TMC signal.

3. The new Exit button, when I press it, I cannot return to the route map. How can I enable it again without restarting the system?

Thanks in advance,

Rene

Hello Boris,

 

Thanks for supporting this mod.

Maybe I missed it in the last 25 pages, but I have 3 questions:

 

1. Navigation voice mute button: does it exist, or how can I temporary kill the voice?

2. TMC for Europe, I have set the testmode setting to EUR, but for some reason the TMC settings show no activity for TMC signal.

3. The new Exit button, when I press it, I cannot return to the route map. How can I enable it again without restarting the system?

 

Thanks in advance,

 

Rene

Mute is on the screen you get when you hit the next turn arrow (top left icon).

Not sure about TMC, we don't have it on US version of AVIC, and there's no TMC broadcasting where Stanislavovich and andr2000 are...

What exit button? Also, hitting MAP should always bring you back to map screen.

3. The new Exit button, when I press it, I cannot return to the route map. How can I enable it again without restarting the system?

 

Thanks in advance,

 

Rene

Exit button is not new one or something else- it is only for me to testing, please do not swith on test mode in regional settings, it MUST be OFF forever!