Ok so I really want to make this my full time mod .... but 1 thing is killing me I have been back and forth between this and IDT's mods and mapchanger , Navteq , Teleatlas..

I want Daftias w/9.6 teleatlas and most importantly the subaru impreza ....I have no problem fixing the sys.txt with other mods for some reason I just can't get that car on Daftias.....

 

I have the .mdl , .tex files in gfx , 3dcars, apl2/igo folders and I get the start up screen

 

If anyone could help me out that would be awsome (before I wear out my SD slot.....lol)

I have tried these two methods and more:

Can i just double check with you.The 2 files impreza.mdl and impreza.tex should be in apl2/igo/data/gfx ie the gfx folder that is contained within the data.zip file and not the one in apl2/igo.

So I installed the Newest NavTeq map for my state in hopes to get the speed limit signs to work on rodes other then highways, no luck. And I can't seem to get my garmin mobile XT maps uncompressed to use them outside of my phone.

Another issue I'm having, perhaps somone here knows a cure....

Several of my POI's remain on the screen even if I have them turned off in the settings, and when they are on, many arent branded, some of the icons are transparent. Though I see doubles in the list, some transparent some not.

I'm gonna try and re-install the branding, and possibly try the TeleAtlas maps just to see.

Any help on this would be great.

Ok so I really want to make this my full time mod .... but 1 thing is killing me I have been back and forth between this and IDT's mods and mapchanger , Navteq , Teleatlas..

I want Daftias w/9.6 teleatlas and most importantly the subaru impreza ....I have no problem fixing the sys.txt with other mods for some reason I just can't get that car on Daftias.....

 

I have the .mdl , .tex files in gfx , 3dcars, apl2/igo folders and I get the start up screen

 

If anyone could help me out that would be awsome (before I wear out my SD slot.....lol)

I have tried these two methods and more:

 

Can i just double check with you.The 2 files impreza.mdl and impreza.tex should be in apl2/igo/data/gfx ie the gfx folder that is contained within the data.zip file and not the one in apl2/igo.

Correct they are in the DATA.zip

 

That sounds awesome too... seriously, what are you guys waiting for? JK Beta testers? Count me in hehe.

There has been a lot of coding involved. We are definitely going to need beta testers. There is a lot more coding and image creating that has to happen before its considered a solid build. Once it is we will need at least 2-3 from EU and US. So we will definitely come knocking.

 

That sounds awesome too... seriously, what are you guys waiting for? JK Beta testers? Count me in hehe.

 

There has been a lot of coding involved. We are definitely going to need beta testers. There is a lot more coding and image creating that has to happen before its considered a solid build. Once it is we will need at least 2-3 from EU and US. So we will definitely come knocking.

Are you having dreams about it every night? I know I did for about a week or so when I was into it heavily.

Just wanted to say "THANKS" because this thing is so frickin' awesome....but you probably already knew that.

I'm enjoying playing around and just trying out different things, definitely a big improvement over the stock interface.

I noticed that when I use the "quick menu" to pull up the POI's it doesnt seem to pull up the nearest locations. If I go to Menu > destination > POI > I have more flexibility.

One thing I want to add... if on this "new version" you could make an arrow (up, down, left, right) when searching for POI's so it can tell you in which direction it is That would be awesome. As always though... great mod!

.

How do you bring up the settings quick menu? I did it once but cant seem to do it again....

Are you having dreams about it every night? I know I did for about a week or so when I was into it heavily.

Almost, somtimes they are nighmares. Though given the time zone diferences between myself and Diaftia it's alomost one continual day.

Cheers

34by151

One thing I want to add... if on this "new version" you could make an arrow (up, down, left, right) when searching for POI's so it can tell you in which direction it is That would be awesome. As always though... great mod!

Already done.

Cheers

34by151

I tried removing the "zoom=1000" from the code string for the signposts and yet they still show up small. WHat gives?

Also, regardless of the transparency settings, on or off, the freeway signs are still transparent and hardly visible.

Any thoughts?

Been reading here:

viewtopic.php?f=34&t=26901

Maybe this is whee the demons lie...

Thanx,

Bud

I tried removing the "zoom=1000" from the code string for the signposts and yet they still show up small. WHat gives?

Also, regardless of the transparency settings, on or off, the freeway signs are still transparent and hardly visible.

 

Any thoughts?

Been reading here:

viewtopic.php?f=34&t=26901

 

Maybe this is whee the demons lie...

 

Thanx,

Bud

Bud - Without going through the signpost ini file, try to increase the zoom to 1200. 1000 is essentially 1:1, as you lower the number the bmp shrinks likewise if increase it it'll get larger.

Also you can download the bmp and ini file I did for merton on page 4. Extract the bmp only and replace the one in your unit. This one is more solid.

Good Luck!

Alex,

I was wondering about something I mentioned to I.D.T awhile back about looking into finding a way to set current location as "Home" and working it into a future release. Question is; if this was possible would it (the AVIC) still have to enter an incorrect physical address into the "set home address" field or could it be coded to save the longitude & latitude calculations as "Home" or current location and not a physical address at all?

As a way of correcting the maps being off on house numbers

could it be coded to save the longitude & latitude calculations as "Home" or current location and not a physical address at all?

Yes, that can be done but I doubt it will make it into the next release. The next release will be V3 due to the number of changes. It will probably be V3.1 before we get to that

Cheers

34by151

could it be coded to save the longitude & latitude calculations as "Home" or current location and not a physical address at all?

 

Yes, that can be done but I doubt it will make it into the next release. The next release will be V3 due to the number of changes. It will probably be V3.1 before we get to that

 

Cheers

34by151

great news,something to look forward to,

thanks for the info.

could it be coded to save the longitude & latitude calculations as "Home" or current location and not a physical address at all?

 

Yes, that can be done but I doubt it will make it into the next release. The next release will be V3 due to the number of changes. It will probably be V3.1 before we get to that

 

Cheers

34by151

N-S-E-W wrote:

Or you can add to the sys.txt file:

[poi]
use_multi_poi_icon=0

Can I also edit the sys.txt and change default lat & long to my location as well as default day and night schemes to those of my choosing??

Would this mod work on the x910bt? This the unit I have installed in my F-150. Pm me if you have the answer.

Thanks

Would this mod work on the x910bt? This the unit I have installed in my F-150. Pm me if you have the answer.

Thanks

Yup. Works great on my x910

I tried removing the "zoom=1000" from the code string for the signposts and yet they still show up small. WHat gives?

Also, regardless of the transparency settings, on or off, the freeway signs are still transparent and hardly visible.

 

Any thoughts?

Been reading here:

http://avic411.com/forum/viewtopic.php?f=34&t=26901

 

Maybe this is whee the demons lie...

 

Thanx,

Bud

 

 

Bud - Without going through the signpost ini file, try to increase the zoom to 1200. 1000 is essentially 1:1, as you lower the number the bmp shrinks likewise if increase it it'll get larger.

 

Also you can download the bmp and ini file I did for merton on page 4. Extract the bmp only and replace the one in your unit. This one is more solid.

 

Good Luck!

Okay,

Now if you can recommend a BMP editor because I cannot open them with either Roxio or Gimp.

Thanx,

Bud

Okay,

Now if you can recommend a BMP editor because I cannot open them with either Roxio or Gimp.

Thanx,

Bud

I use Photoshop CS3 for ALL my image editing

I tried removing the "zoom=1000" from the code string for the signposts and yet they still show up small. WHat gives?

Also, regardless of the transparency settings, on or off, the freeway signs are still transparent and hardly visible.

 

Any thoughts?

Been reading here:

viewtopic.php?f=34&t=26901

 

Maybe this is whee the demons lie...

 

Thanx,

Bud

 

 

Bud - Without going through the signpost ini file, try to increase the zoom to 1200. 1000 is essentially 1:1, as you lower the number the bmp shrinks likewise if increase it it'll get larger.

 

Also you can download the bmp and ini file I did for merton on page 4. Extract the bmp only and replace the one in your unit. This one is more solid.

 

Good Luck!

 

Okay,

Now if you can recommend a BMP editor because I cannot open them with either Roxio or Gimp.

Thanx,

Bud

You don't need a bmp editor to install the bmp. The signboard color is defined in the ini file, which you're to ignore from the download. Don't make this harder than it needs to be!

LS, I do use 2.3 version on a F500 EU model. Its working prperly fine, however I have a small issue with the audio. The audio warning and guidance is not working properly. My systems does mute the other sounds, but I do not hear anything. Any Ideas?

Jan Paul

 

That sounds awesome too... seriously, what are you guys waiting for? JK Beta testers? Count me in hehe.

 

There has been a lot of coding involved. We are definitely going to need beta testers. There is a lot more coding and image creating that has to happen before its considered a solid build. Once it is we will need at least 2-3 from EU and US. So we will definitely come knocking.

 

Are you having dreams about it every night? I know I did for about a week or so when I was into it heavily.

Its pretty insane. I have. I sometimes have a hard time going to sleep and then when I wake up its in my head. Its really ridiculous. I have not been hitting it too hard lately. 34by151 has been doing a bulk of the coding. He has a really cool development tool that lets him jam this stuff out quickly. Up to the 2.3 release and the dreams got pretty vivid.

I tried removing the "zoom=1000" from the code string for the signposts and yet they still show up small. WHat gives?

Also, regardless of the transparency settings, on or off, the freeway signs are still transparent and hardly visible.

 

Any thoughts?

Been reading here:

http://avic411.com/forum/viewtopic.php?f=34&t=26901

 

Maybe this is whee the demons lie...

 

Thanx,

Bud

Freeway signs are limited in width. Adjust the W= setting and it will make them larger.

Transparency is for the navigation backgrounds not the freeway signs. Working on that put all changes to the signposts require a reboot.

Alex