silver528
Members-
Content Count
39 -
Joined
-
Last visited
About silver528
-
Rank
Member
-
If you look up about 1.5yrs ago you will see a gentleman Named Twin did that same thing and sold me a wood bezel. It wasnt to hard but looks great cheers
-
that wood trim really finished of the look. Made it look factory
-
Is there something I'm missing?
silver528 replied to danickbelair's topic in Problems/Troubleshooting
It could be your burner or the dvd your using.Not everyone had an easy time with it. If you want me to make you a copy pm me.. -
Is there something I'm missing?
silver528 replied to danickbelair's topic in Problems/Troubleshooting
its only 120 from pioneer and there are several guys that have sold them on here. I made several and never got a complaint -
Is there something I'm missing?
silver528 replied to danickbelair's topic in Problems/Troubleshooting
I could be a bad burn, did you verify the disk?Make sure your burner is set at its lowest burn rate. -
you just have to match the colors of the harnesses. It is very easy
-
no the z and d wiring is different
-
I used sony disks and they worked great. Made about 10 copies with no problems
-
D2 Lost ALL Illumination after install 02 Trailblazer
silver528 replied to John02TrailBlaz's topic in General
unplugged the radio, and check all the fuses again. maybe u have a wire crossed and it keeps blowing a fuse -
there are a few radio kits available,but not to many and there expensive as far as kits go. I have a d3 in mine and had to cut the air vent in back of the radio. I can send you sum pics if you want to see it
-
Avic d2 arrow moves slowly when at stop
silver528 replied to cfde76's topic in Problems/Troubleshooting
do you have the speed sense wire hooked up? -
CNDV-80MT update epic fail on the avic-d3
silver528 replied to mayuan's topic in Problems/Troubleshooting
pm me -
CNDV-80MT update epic fail on the avic-d3
silver528 replied to mayuan's topic in Problems/Troubleshooting
I have burned about 5 east disks with no problem.I use sony dl disks with power iso.