Datsun

Q#1. I would think that if there is power going thru the unit you should be able to tell. Q#2. No, I do not believe so. Q#3. I personally have not seen this. Q#4. I think that a loose or incorrectly attached ribbon cable could cause this. If you or a friend has a voltage meter I would check the plug that plugs into the back of the unit to see if it is getting power. That’s the first thing I would do, could be a blown fuse.

This is just my experience with a 4500. I tried putting the image on an SD card using windows and it failed, the unit still didn’t work. Then I used a Linux machine to put the image on a card and it worked. I believe there is a 4400 file here somewhere. If you have it then try using a different image burner, or like I did a Linux machine. Just my experience.

It was quite awhile back and I am not here to bad mouth anyone. It was a Russian seller on eBay. I just wanted my unit fixed. When it was due to arrive on beautiful sunny day, with my mailbox right at the clean, clear, not blocked road it was marked undeliverable. I filed a dispute and lost, never seen the firmware or the money I spent on it.

In the configuration file of the software I got. It had multiple units in there. If I get the chance today I will look in there and see if the 4100 was in there.

I also ordered the card from eBay, never got it. I tried the 4400 firmware posted here, it didn’t work correctly in my unit. Myself, I was tired of my unit working half-a$$ed so it was MY choice to purchase the card from PacParts and I just wish I would have done it first because my unit works just like it is supposed to, and I did the same exact thing @fry did. So if it ever happens again I have a backup copy. If I recommend purchasing it, it is because it worked for me, all the other things didn’t. Happy you got your unit working, but I am also happy I got mine working also. Good Luck.

Did you check PacParts?

Awesome news man.

I purchased one of the official Pioneer SD cards for the AVH-W4500NEX from PacParts.com. Part number QXX3352 (https://www.pacparts.com/part.cfm?part_no=QXX3352&mfg=Pioneer).

Exactly what I did. @fry glad that it worked for you also.

@fry if this is still going on after school starts I might be to jump in and help. I am not very Linux fluent but I’d like to think I a quick learner. But currently I am trying to raise 2 grandchildren (6 & 16) and am awful busy with them. Good thing am retired. Just keep me in mind.

This is for @fry

This is where I found the information. b. Creating dd disk image (file image) You can create an image of a disk or a file image. Backing up a disk to an image will be faster than copying the exact data. Also, disk image makes the restoration much easier. sudo dd if=/dev/sda of=/tmp/sdadisk.img You can store the output file where you want but you have to give a filename ending with .img an extension. Instead of /tmp/sdadisk.img, you could store it for example at /sdadisk.img if you want. e. Restoring a disk or a partition image Save a disk or a partition helps to resto

Yes I will. I am currently not home but when I get there I will lookup the exact command lines and post them for you.

I used the “dd” command on a Linux laptop to create an .img file onto the laptop, using Linux Mint 14.5. Then I once again used the “dd” command to place that image into the Sandisk SD card. Just glancing at the to cards they looks identical. So I put the Sandisk card into my w4500 and haven’t taken it out yet. Works perfectly. Does this help ?

I cannot confirm this. I have an iPhone and no steering wheel controls on my truck. But I am using a file purchased from PacParts. Expensive but it works fine. It also was not password locked so I purchased a 16gb Sandisk SD card and put the image on it saving the original in case this happens again.

Hopefully this will help you. When I took my unit (w4500) out of my truck I cut a hole in it so if something didn’t go right I could easily access the sd reader for the firmware. I acquired the firmware, and burnt it to a 16gb sd card. It worked but not correctly. I used a Windows Img burner to do this. So I then purchased a 16gb Sandisk SD card, real nice one and I used my Linux machine to burn the image to this card. Haven’t had not even one issue since. I am going to try to attach a photo of my unit. Top slot is the user assessable SD slot, the bottom one is the slot for the firmware.

Once the img is placed on the sd card it cannot be read by a Mac or a Windows machine only a Linux machine. Once you put it in the w4500 and try to boot it will be locked so it cannot be read at all except for the pioneer unit. Does this help.

I found this in another thread. Hope it helps. You can do it by entering test mode and copying and/or deleting the user profile. Grad the test file from here: http://avic411.com/index.php?/topic/81469-avic-development-mod-device-backup/%C2%A0for%C2%A0this. copyit to a usb stick, insert to your pioneer HU and start the device. Choose file maintenance and enter the extdata partition look up user and there you have it.

How about the google drive link a couple of posts before yours. Seems to work for me. https://drive.google.com/file/d/1FhhDuE2QdXU0mvF_G7n_8hURPUZ0Jb7R/view?usp=sharing

Great News.

SD card failure is what I have read. Cheap or too full of error logs is my understanding.

Not a problem. Happy to help anyone I can. I spent a lot of time on this website reading thru threads and trying different things to get my 4500 back to working again.

Now that is a cut out. Wow. I hadn’t seen that photo. Good Luck.

Good luck, go slow, be careful. I don’t remember if there is a cable there. Here is my cut out.