Newman

you use the arrows to choose which letter you want then you have to tap the letter between the arrows to select it. for example if you want to choose the letter D you have to hit the arrow to go from A to B to C to D then tap the letter D with your finger and it will move the list to the Ds.

It does have voice recognition for bluetooth phone and for ipod (with the optional ipod cable) but DOES NOT have voice recognition for navigation input. the Z100BT does have voice recognition for all 3, bluetooth, ipod and navigation.

Those three channels are the 3 free preview channels you get when the unit is not activated. First, verify to make sure you have the correct radio ID number. If the number is corrtect, take your vehicle outside where it has a clear view of the sky and let it sit, with the radio powered on, for about 15 mins. if that does not work you need to have Xm re-send the activation signal. When you first activate your XM they request that you have your car outside and powered on for 15-20 mins until the unit is activated. if you did not do this the first time make sure you do it the 2nd time.

The only thing I know for sure is that we are able to search for cities in the US and Canada by postal code. The screen that allows you to type in the city name will also have numbers on the top that you can use for postal codes. in the US our zip codes are all numbers but I just went outside and test it for Canada and it works as well. (Canada uses letters and numbers like the UK) I cannot say for sure if this will work for you but go to that screen and give it a try.

Just a couple questions to clarify... where are you located? UK? what are you looking to use postal codes to search for? address or points of interest?

It is an installation error see this thread: viewtopic.php?f=58&t=29050&p=212061 You need to switch the wires on the C2R-CHY4.

the Stratus 6 is also an option

what version firmware does your unit have? I just tested an X710BT here in the shop with firmware v. 3.020100 and it definitely has the all of the voice options. If yours does not have it then I would say something isnt right. go to MENU, SETTINGS, SYSTEM SETTINGS and the icon in the upper left should say LANGUAGE. select that icon and you should see PROGRAM LANGUAGE and VOICE LANGUAGE. choose VOICE LANGUAGE and Samantha TTS should be one of the options. as far as I know, every nav unit from Pioneer has the ability to change nav voices and gives you at least 1 TTS option. this is not

There is also a thread that mentions how certain characters or symbols in your contacts will confuse the bluetooth and will result in the phonebook not transferring. Try to search for the thread so you can read through it but the main thing is to make sure that none of your contacts have anything other that letters and numbers in them. Take out all periods, commas, ampersands, slashes, dashes, perenthesis...etc... from the names of your contacts. If you have someone named Dr. Smith - change it to Dr Smith If you have a contact named Bob & Jane - change it to Bob and Jane

you want to go into navi settings and turn "SMART ZOOM" off. this will stop it from defaulting back to 1000ft

What kind of cars are these units installed in? Are you able to use voice commands? Do you hear a tone when you touch buttons on the touch screen?

how about: "i think that screen is meant to allow you to adjust the camera's display settings, not to actually view the camera while driving" but now that you say it, that makes perfect sense.

The Z actually does allow for a full rear view while driving, however there seems to be a glitch with this feature (in my opinion) If you hold down the MODE button for about 3 seconds it will pop up the visual settings (brightness, contrast, etc...) and there will also be a button in the lower right that says CAMERA. if you hit this button it will switch the screen to show you the rear camera view. BUT FOR SOME STRANGE REASON you cant get the BRIGHTNES, CONTRAST etc... settings to go away. so in the end you can only see a small sliver of the camera view. it seems like this was obviously in

The only thing I can say for sure is that you will be able to use the entertainment system. If your factory headunit was the DVD player for the rear screen the Z will be able to do that. You just have to make sure they are connected during the install. as for the other two questions,I do not have an answer for those.

99carrera is mistaken. They did not remove the voice options unless you have a european unit or something.

What model is your unit? I really dont think it has anything to do with the phones. My feeling is that its a problem with the navi. It is strange that you had the same problem with a different unit but I still want to say that the problem is with the navi and not the phones.

make sure your phone is set to "discoverable" or "visible"

Fortunately, I never had problems with my F900 VR so my input may not help you much. But, for what its worth, i find that the VR on the X works just as well as I would expect it to. The biggest difference between the X and the Z is that on the Z, the VR is ready to listen immediately after you press the VR button. on the X there is a bit of a lag. I am only talking MAYBE a full second but its not as instantaneous as the Z. The Z's VR seems faster but I would say they have about the same accuracy and success rate. perhaps the Z has a slight edge in accuracy but, in my experience, the X

turning off the Key Beeps under NAVI SETTINGS - SOUND SETTINGS should turn off all the touch screen beeps as well as the steering wheel control beeps. however, when you do this, it will also turn off the "chime" you hear after pressing the voice command button. kind of stupid but thats the way it is. what do you mean by "I already turned it off in the nav but it's still on for everything else." what is "everything else"?

That is definitely the solution. Everytime you make changes to your ipod you need to let the unit update the "VR Catalog" You can leave this on so it does it automatically, however, it is quite annoying because it does it EVERY TIME whether you need it or not. so most people just leave it off until they want to update the VR catalog. they let it catalog one time, then turn it back off until next time. to turn it on and off: go to MENU, SETTINGS, then AV SETTINGS. Choose "VR CATALOG MODE" and turn it "ON". Go back to your iPod screen and wait for the VR Catalog to complete (this may

Check to make sure the mic cable isnt pinched or tweaked somewhere. also just check to make sure it is plugged in completely.

So there won't be a faster processor in the new one? That would definitely confirm the new software loaded onto the Z110 will be just as fast and make it identical to the Z120. The Z110 already has the fastest processor Pioneer has ever put into a nav. i wouldnt see a reason to upgrade the processor at this point also, just so everyone knows, the Pandora feature on the new navs will only work with an iPhone. When i first heard about it I assumed it would work with any smartphone with the Pandora app and send it via bluetooth. however, unless I am mistaken, it only works with the i

For what it's worth our Pioneer rep said changes are just going to be software and both new units will probably ship in May (X920 and Z120).

Our Pioneer rep says it looks like the X920 and the new Z will ship in May. that may change but thats what its looking like right now.

first thing is to check the installation. make sure there arent any install errors. there could be a problem with your unit but my feeling is that something or somethingS arent connected properly. make sure you check the harness as well as the microphone.