simbad88

How to bypass Wrong SD stop at 93% of loading As I wrote before this is caused by four files missing in folder NDATA. The simple solution is to copy the last four files Ndata.106 to Ndata.110 and rename the copied files as Ndata.111 to Ndata.114 respectively, so yo have the quantity of files complete untill Ndata.114. With the NDATA folder containing the total 114 ammount of files the process do not stop at 93% with the error message, and finish and reboots showing 2017 release. The only thing is to whish that those 4 repited files will no affect the maps of your country, or the countr

Hello again: The reason why the process stops at 93% is because there are four files missiing in Update folder. There should be 114 Ndata files and the last one in the package downloaded from the link supplied in this forum is Ndata 110. So files Ndata111 to Ndata114 are missing. This could be seen inside de contents of file ALLDATA.VER if you open it. Can anyone that has a complete copy of T1000-25815 update provide those files? Thank you.

Be careful Files here: http://avic411.com/index.php?/topic/83505-new-release-f20bt-f30bt-f40bt-f920bt-f930bt-f840bt-etc-2017-release/?p=345456 are corrupted and cause stop the actualization at 93%. This is T1000-25815 for AVIC F20BT-F920BT- etc. Do not try to actualize with godzilla files at the beguining if your model is not suitable for T1000-25817. I did actualize my F920BT with T1000-25817, which was accepted and finished without error, but it caused GPS not to work. Everything was fine except GPS, that showed good signal on settings, but maps where not working. Also the syste

Thanks a lot pmc2 It works flawlessly on my F920BT Enclosed cardinfo.cif zipped CARDINFO.zip VERINFO.DAT

Hello all: It worked perfectly well in my old F920Bt with files posted here. Now I have 2015 version. The problem is that I live in Spain an now the maps are for California so I have to change my home to USA or recharge old maps. Does any one have European maps for FB920BT?

Thanks Pionara. It works flawlesly, F920BT from Spain.

Hello to everybody: I've being reading a lot through this fantastic AVIC411 forums, and still haven't found a way to get a full backup of my F920BT unit. I have tested everything posted on this forums and I couldn't get control on my unit to copy or paste, only the automatic ScriptExec.ini works fine. Modifiing the ScriptExec.ini file supplied by Condis in his 2.21 version I could get a copy and backup of my USER folder. COPY -c USER SD\BACKUP With that I got the complete USER directory copied on My SD card in the BACKUP folder previously created empty. I would like to use th