ChristopherLCamacho

depending on if you have premium sound or not you may need that amp integrator harness, if not a standard chrystler harness will work, dont remember the exact metra part number, the one other harness gives you switched acc. power which is like 100 bucks, you can grabbed switched acc. at the cig plug, and meter the wire. that will save you some money there unless you have the premium sound

+1, every touch screen I've seen always had a VGA for VIDEO ONLY and USB for TOUCHSCREEN options.

You have to grab it at the wheel speed sensor, grabbed mine from the rear drivers side. Theirs two wires going to the speed sensor, it will be one or the other

this is what i got for an 02 BMW 530I Speed Sense BROWN/RED (AC) AT INST. CLUSTER HARNESS

This is what I found for your car. hope this helps. Speed Sense yellow/green ABS mod, pin 10 or cluster, pin 6 Note: BMW, Z4, 2003, Speed Sense The ABS module is in the rear driver side of the engine compartment.

ACURA, RSX, 2005 Radio Illumination red/black + radio harness

i dont remember how the rear cam looks for eclipse i believe it just plugs into the unit, if not you might need switched 12 volts, ground, and reverse input for the cam to work when you go in reverse.

use anything that will ground the parking brake. what i would do it strip a portion of the parking brake wire from the eclipse nav and tie it into the ground for the eclipse nav. use solder, wire taps, its all good. most people prefer solder and heat shrink.

go to a wheel speed sensor. not sure on your vehicle but search some mazda forums for wheel speed sensor. once you find it, it will be either one wire or the other since theirs only two wires for the wheel speed sensor. hope this helps somewhat.

give it some time and see it it will initialize, or their may be more than one grey/black wire in the radio harnes.

no problem.

Speed Sense purple/white back of fuse box, 28 pin plg, pin 26 Note: TOYOTA, RAV4, 2005, Speed Sense Can also find the wire at the ECM behind the glove box, second plug from the bottom, pin 17. Reverse Light red/blue + fuse box, 28 pin plug, pin 27 hope this helps.

what about one for a Lincoln LS for a Z2 avic, that would be sweet. Something similar to the factory Nav screen or Lincoln American Luxury. I saw one but for a D3 none for the Z2 boo.

does your vehicle dynamics work? it should show acceleration and speed and voltage, if not it should be in a setup menu with the status of the sats. and vehicle speed, which beeps with vehicle speed. should be in the manual of how to get to it.

Speed Sense blue/white under passenger seat, 8 pin plug and yes the tach wire is different from the speed sense, it shows RPM's not Vehicle Speed. hope this helps